lkml.org 
[lkml]   [2018]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 3/3] clk: meson: add sub MMC clock controller driver
From
Date
On Tue, 2018-07-10 at 16:36 +0000, Yixun Lan wrote:
> The patch will add a MMC clock controller driver which used by MMC or NAND,
> It provide a mux and divider clock, and three phase clocks - core, tx, tx.
>
> Two clocks are provided as the parent of MMC clock controller from
> upper layer clock controller - eg "amlogic,axg-clkc" in AXG platform.
>
> To specify which clock the MMC or NAND driver may consume,
> the preprocessor macros in the dt-bindings/clock/emmc-clkc.h header
> can be used in the device tree sources.
>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> drivers/clk/meson/Kconfig | 9 +
> drivers/clk/meson/Makefile | 1 +
> drivers/clk/meson/mmc-clkc.c | 419 +++++++++++++++++++++++++++++++++++
> 3 files changed, 429 insertions(+)
> create mode 100644 drivers/clk/meson/mmc-clkc.c
>
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index efaa70f682b4..edc18e65c89b 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -15,6 +15,15 @@ config COMMON_CLK_MESON_AO
> select COMMON_CLK_REGMAP_MESON
> select RESET_CONTROLLER
>
> +config COMMON_CLK_MMC_MESON
> + tristate "Meson MMC Sub Clock Controller Driver"
> + depends on COMMON_CLK_AMLOGIC
> + select MFD_SYSCON
> + select REGMAP
> + help
> + Support for the MMC sub clock controller on Amlogic Meson Platform,
> + Say Y if you want this clock enabled.
> +
> config COMMON_CLK_REGMAP_MESON
> bool
> select REGMAP
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 72ec8c40d848..4b3817f80ba1 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -9,4 +9,5 @@ obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
> obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
> obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
> +obj-$(CONFIG_COMMON_CLK_MMC_MESON) += mmc-clkc.o
> obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o
> diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c
> new file mode 100644
> index 000000000000..43b7a376746d
> --- /dev/null
> +++ b/drivers/clk/meson/mmc-clkc.c
> @@ -0,0 +1,419 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Amlogic Meson MMC Sub Clock Controller Driver
* Copyright (c) 2017 Baylibre SAS.
* Author: Jerome Brunet <jbrunet@baylibre.com>

Considering that a fair share of the code below has been copied from the clock
portion of the eMMC driver, which I wrote last year.

> + *
> + * Copyright (c) 2018 Amlogic, inc.
> + * Author: Yixun Lan <yixun.lan@amlogic.com>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/of_device.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/platform_device.h>
> +#include <dt-bindings/clock/amlogic,meson-mmc-clkc.h>
> +
> +#include "clkc.h"
> +
> +/* clock ID used by internal driver */
> +#define CLKID_MMC_MUX 0
> +#define CLKID_MMC_PHASE_CORE 2
> +
> +#define SD_EMMC_CLOCK 0
> +#define CLK_DIV_MASK GENMASK(5, 0)
> +#define CLK_SRC_MASK GENMASK(7, 6)
> +#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
> +#define CLK_TX_PHASE_MASK GENMASK(11, 10)
> +#define CLK_RX_PHASE_MASK GENMASK(13, 12)
> +#define CLK_V2_TX_DELAY_MASK GENMASK(19, 16)
> +#define CLK_V2_RX_DELAY_MASK GENMASK(23, 20)
> +#define CLK_V2_ALWAYS_ON BIT(24)
> +
> +#define CLK_V3_TX_DELAY_MASK GENMASK(21, 16)
> +#define CLK_V3_RX_DELAY_MASK GENMASK(27, 22)
> +#define CLK_V3_ALWAYS_ON BIT(28)
> +
> +#define CLK_DELAY_STEP_PS 200
> +#define CLK_PHASE_STEP 30
> +#define CLK_PHASE_POINT_NUM (360 / CLK_PHASE_STEP)
> +
> +#define MUX_CLK_NUM_PARENTS 2
> +#define MMC_MAX_CLKS 5

Some defines are aligned, some aren't. please be consistent about it.
I personally prefer when things are aligned but it is just a preference.

> +
> +struct clk_regmap_phase_data {

Considering the recent addition of clk_phase in clk/meson, it is not the best
name to choose.

clk_phase_delay_data ?

> + unsigned long phase_mask;
> + unsigned long delay_mask;
> + unsigned int delay_step_ps;
> +};
> +
> +struct mmc_clkc_data {
> + struct clk_regmap_phase_data tx;
> + struct clk_regmap_phase_data rx;
> +};



> +
> +struct mmc_clkc_info {
> + struct device *dev;

I don't think you need keep dev here, considering this is the device data.

> + struct regmap *map;
> + struct mmc_clkc_data *data;
> +};

Overall, I don't think you need this structure

> +
> +static inline struct clk_regmap_phase_data *
> +clk_get_regmap_phase_data(struct clk_regmap *clk)

Update name as well

> +{
> + return (struct clk_regmap_phase_data *)clk->data;
> +}
> +
> +static struct clk_regmap_mux_data mmc_clkc_mux_data = {
> + .offset = SD_EMMC_CLOCK,
> + .mask = 0x3,
> + .shift = 6,
> + .flags = CLK_DIVIDER_ROUND_CLOSEST,
> +};
> +
> +static struct clk_regmap_div_data mmc_clkc_div_data = {
> + .offset = SD_EMMC_CLOCK,
> + .shift = 0,
> + .width = 6,
> + .flags = CLK_DIVIDER_ROUND_CLOSEST | CLK_DIVIDER_ONE_BASED,
> +};

Same comment on alignement. Some structure you've aligned, and some you haven't
Consistency ...

> +
> +static struct clk_regmap_phase_data mmc_clkc_core_phase = {
> + .phase_mask = CLK_CORE_PHASE_MASK,
> +};
> +
> +static const struct mmc_clkc_data mmc_clkc_gx_data = {
> + {
> + .phase_mask = CLK_TX_PHASE_MASK,
> + .delay_mask = CLK_V2_TX_DELAY_MASK,
> + .delay_step_ps = CLK_DELAY_STEP_PS,
> + },
> + {
> + .phase_mask = CLK_RX_PHASE_MASK,
> + .delay_mask = CLK_V2_RX_DELAY_MASK,
> + .delay_step_ps = CLK_DELAY_STEP_PS,
> + },
> +};
> +
> +static const struct mmc_clkc_data mmc_clkc_axg_data = {
> + {
> + .phase_mask = CLK_TX_PHASE_MASK,
> + .delay_mask = CLK_V3_TX_DELAY_MASK,
> + .delay_step_ps = CLK_DELAY_STEP_PS,
> + },
> + {
> + .phase_mask = CLK_RX_PHASE_MASK,
> + .delay_mask = CLK_V3_RX_DELAY_MASK,
> + .delay_step_ps = CLK_DELAY_STEP_PS,
> + },
> +};
> +
> +static const struct of_device_id mmc_clkc_match_table[] = {
> + {
> + .compatible = "amlogic,meson-gx-mmc-clkc",
> + .data = &mmc_clkc_gx_data
> + },
> + {
> + .compatible = "amlogic,meson-axg-mmc-clkc",
> + .data = &mmc_clkc_axg_data
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, mmc_clkc_match_table);
> +
> +static struct clk_regmap *mmc_clkc_register_mux(struct mmc_clkc_info *clkc)
> +{
> + const char *parent_names[MUX_CLK_NUM_PARENTS];
> + struct device *dev = clkc->dev;
> + struct clk_init_data init;
> + struct clk_regmap *mux;
> + struct clk *clk;
> + char *mux_name;
> + int i, ret;
> +
> + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
> + if (!mux)
> + return ERR_PTR(-ENOMEM);
> +
> + for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
> + char name[8];
> +
> + snprintf(name, sizeof(name), "clkin%d", i);
> + clk = devm_clk_get(dev, name);
> + if (IS_ERR(clk)) {
> + if (clk != ERR_PTR(-EPROBE_DEFER))
> + dev_err(dev, "Missing clock %s\n", name);
> + return ERR_PTR((long)clk);
> + }
> +
> + parent_names[i] = __clk_get_name(clk);
> + }
> +
> + mux_name = kasprintf(GFP_KERNEL, "%s#mux", dev_name(dev));
> + if (!mux_name)
> + return ERR_PTR(-ENOMEM);
> +
> + mux->map = clkc->map;
> + mux->data = &mmc_clkc_mux_data;
> +
> + init.name = mux_name;
> + init.ops = &clk_regmap_mux_ops;
> + init.flags = CLK_SET_RATE_PARENT;
> + init.parent_names = parent_names;
> + init.num_parents = MUX_CLK_NUM_PARENTS;
> +
> + mux->hw.init = &init;
> + ret = devm_clk_hw_register(dev, &mux->hw);
> + if (ret) {
> + dev_err(dev, "Mux clock registration failed\n");
> + mux = ERR_PTR(ret);
> + }
> +
> + kfree(mux_name);
> + return mux;
> +}
> +
> +static struct clk_regmap *mmc_clkc_register_div(struct mmc_clkc_info *clkc)
> +{
> + const char *parent_names[MUX_CLK_NUM_PARENTS];
> + struct device *dev = clkc->dev;
> + struct clk_init_data init;
> + struct clk_regmap *div;
> + char *mux_name, *div_name;
> + int ret;
> +
> + div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
> + if (!div)
> + return ERR_PTR(-ENOMEM);
> +
> + mux_name = kasprintf(GFP_KERNEL, "%s#mux", dev_name(dev));
> + div_name = kasprintf(GFP_KERNEL, "%s#div", dev_name(dev));
> + if (!mux_name || !div_name) {
> + div = ERR_PTR(-ENOMEM);
> + goto err;
> + }
> +
> + parent_names[0] = mux_name;
> + div->map = clkc->map;
> + div->data = &mmc_clkc_div_data;
> +
> + init.name = div_name;
> + init.ops = &clk_regmap_divider_ops;
> + init.flags = CLK_SET_RATE_PARENT;
> + init.parent_names = parent_names;
> + init.num_parents = 1;
> +
> + div->hw.init = &init;
> + ret = devm_clk_hw_register(dev, &div->hw);
> + if (ret) {
> + dev_err(dev, "Divider clock registration failed\n");
> + div = ERR_PTR(ret);
> + }
> +
> +err:
> + kfree(mux_name);
> + kfree(div_name);
> + return div;
> +}
> +
> +static int clk_regmap_get_phase(struct clk_hw *hw)
> +{
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct clk_regmap_phase_data *ph = clk_get_regmap_phase_data(clk);
> + unsigned int phase_num = 1 << hweight_long(ph->phase_mask);
> + unsigned long period_ps, p, d;
> + int degrees;
> + u32 val;
> +
> + regmap_read(clk->map, SD_EMMC_CLOCK, &val);
> + p = (val & ph->phase_mask) >> __ffs(ph->phase_mask);
> + degrees = p * 360 / phase_num;
> +
> + if (ph->delay_mask) {
> + period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000,
> + clk_get_rate(hw->clk));
> + d = (val & ph->delay_mask) >> __ffs(ph->delay_mask);
> + degrees += d * ph->delay_step_ps * 360 / period_ps;
> + degrees %= 360;
> + }
> +
> + return degrees;
> +}
> +
> +static void clk_regmap_apply_phase_delay(struct clk_regmap *clk,
> + unsigned int phase,
> + unsigned int delay)
> +{
> + struct clk_regmap_phase_data *ph = clk->data;
> + u32 val;
> +
> + regmap_read(clk->map, SD_EMMC_CLOCK, &val);
> +
> + val &= ~ph->phase_mask;
> + val |= phase << __ffs(ph->phase_mask);
> +
> + if (ph->delay_mask) {
> + val &= ~ph->delay_mask;
> + val |= delay << __ffs(ph->delay_mask);
> + }
> +
> + regmap_write(clk->map, SD_EMMC_CLOCK, val);
> +}
> +
> +static int clk_regmap_set_phase(struct clk_hw *hw, int degrees)
> +{
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct clk_regmap_phase_data *ph = clk_get_regmap_phase_data(clk);
> + unsigned int phase_num = 1 << hweight_long(ph->phase_mask);
> + unsigned long period_ps, d = 0, r;
> + u64 p;
> +
> + p = degrees % 360;
> +
> + if (!ph->delay_mask) {
> + p = DIV_ROUND_CLOSEST_ULL(p, 360 / phase_num);
> + } else {
> + period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000,
> + clk_get_rate(hw->clk));
> +
> + /* First compute the phase index (p), the remainder (r) is the
> + * part we'll try to acheive using the delays (d).
> + */
> + r = do_div(p, 360 / phase_num);
> + d = DIV_ROUND_CLOSEST(r * period_ps,
> + 360 * ph->delay_step_ps);
> + d = min(d, ph->delay_mask >> __ffs(ph->delay_mask));
> + }
> +
> + clk_regmap_apply_phase_delay(clk, p, d);
> + return 0;
> +}
> +
> +static const struct clk_ops clk_regmap_phase_ops = {
> + .get_phase = clk_regmap_get_phase,
> + .set_phase = clk_regmap_set_phase,
> +};
> +
> +static struct clk_regmap *
> +mmc_clkc_register_phase_clk(struct mmc_clkc_info *clkc,
> + char *name, char *parent_name, unsigned long flags,
> + struct clk_regmap_phase_data *phase_data)
> +
> +{
> + const char *parent_names[MUX_CLK_NUM_PARENTS];
> + struct device *dev = clkc->dev;
> + struct clk_init_data init;
> + struct clk_regmap *x;

x is not a very good name, 'clk' is just 2 more letters ...

> + char *clk_name, *core_name;
> + int ret;
> +
> + /* create the mmc rx clock */
> + x = devm_kzalloc(dev, sizeof(*x), GFP_KERNEL);
> + if (!x)
> + return ERR_PTR(-ENOMEM);
> +
> + clk_name = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), name);
> + core_name = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), parent_name);
> +
> + if (!clk_name || !core_name) {
> + x = ERR_PTR(-ENOMEM);
> + goto err;
> + }
> + parent_names[0] = core_name;
> +
> + init.name = clk_name;
> + init.ops = &clk_regmap_phase_ops;
> + init.flags = flags;
> + init.parent_names = parent_names;
> + init.num_parents = 1;
> +
> + x->map = clkc->map;
> + x->data = phase_data;
> + x->hw.init = &init;
> +
> + ret = devm_clk_hw_register(dev, &x->hw);
> + if (ret) {
> + dev_err(dev, "Core %s clock registration failed\n", name);
> + x = ERR_PTR(ret);
> + }
> +err:
> + kfree(clk_name);
> + kfree(core_name);
> + return x;
> +}

In all your mmc_clkc_register_xxx_() you should a pattern repeating itself. It
is something I pointed out in the previous version of your patchset

1. allocate a clk_regmap
2. allocate a clock name using dev name and a suffix.
3. register clk_hw
4. free clock name
5. return clk_regmap

You should be able to make an helper function out of this
Prototype will probably look like this:

static struct clk_regmap *
mmc_clkc_register_clk(struct device *dev, struct regmap *map,
struct clk_init_data *init, const char* suffix)

> +
> +static int mmc_clkc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct mmc_clkc_info *clkc;
> + struct clk_regmap *mux, *div, *core, *rx, *tx;
> + struct clk_hw_onecell_data *onecell_data;
> +
> + clkc = devm_kzalloc(dev, sizeof(*clkc), GFP_KERNEL);
> + if (!clkc)
> + return -ENOMEM;
> +
> + clkc->data = (struct mmc_clkc_data *)of_device_get_match_data(dev);
> + if (!clkc->data)
> + return -EINVAL;

Prefer ENODEV for this

> +
> + clkc->dev = dev;
> + clkc->map = syscon_node_to_regmap(dev->of_node);
> +
> + if (IS_ERR(clkc->map)) {
> + dev_err(dev, "could not find mmc clock controller\n");
> + return PTR_ERR(clkc->map);
> + }
> +
> + onecell_data = devm_kzalloc(dev, sizeof(*onecell_data) +
> + sizeof(*onecell_data->hws) * MMC_MAX_CLKS,
> + GFP_KERNEL);
> + if (!onecell_data)
> + return -ENOMEM;
> +
> + mux = mmc_clkc_register_mux(clkc);
> + if (IS_ERR(mux))
> + return PTR_ERR(mux);
> +
> + div = mmc_clkc_register_div(clkc);
> + if (IS_ERR(div))
> + return PTR_ERR(div);
> +
> + core = mmc_clkc_register_phase_clk(clkc, "core", "div",
> + CLK_SET_RATE_PARENT,
> + &mmc_clkc_core_phase);
> + if (IS_ERR(core))
> + return PTR_ERR(core);
> +
> + rx = mmc_clkc_register_phase_clk(clkc, "rx", "core", 0,
> + &clkc->data->rx);
> + if (IS_ERR(rx))
> + return PTR_ERR(rx);
> +
> + tx = mmc_clkc_register_phase_clk(clkc, "tx", "core", 0,
> + &clkc->data->tx);
> + if (IS_ERR(tx))
> + return PTR_ERR(tx);
> +
> + onecell_data->hws[CLKID_MMC_MUX] = &mux->hw,
> + onecell_data->hws[CLKID_MMC_DIV] = &div->hw,
> + onecell_data->hws[CLKID_MMC_PHASE_CORE] = &core->hw,
> + onecell_data->hws[CLKID_MMC_PHASE_RX] = &rx->hw,
> + onecell_data->hws[CLKID_MMC_PHASE_TX] = &tx->hw,
> + onecell_data->num = MMC_MAX_CLKS;
> +
> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> + onecell_data);
> +}
> +
> +static struct platform_driver mmc_clkc_driver = {
> + .probe = mmc_clkc_probe,
> + .driver = {
> + .name = "meson-mmc-clkc",
> + .of_match_table = of_match_ptr(mmc_clkc_match_table),
> + },
> +};
> +
> +module_platform_driver(mmc_clkc_driver);

\
 
 \ /
  Last update: 2018-07-15 22:05    [W:0.146 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site