lkml.org 
[lkml]   [2018]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 10/18] drm/sun4i: mixer: Read id from DT
On Wed, Jul 11, 2018 at 3:10 PM, Jernej Škrabec <jernej.skrabec@siol.net> wrote:
> Dne sreda, 11. julij 2018 ob 05:11:56 CEST je Chen-Yu Tsai napisal(a):
>> On Wed, Jul 11, 2018 at 4:35 AM, Jernej Skrabec <jernej.skrabec@siol.net>
> wrote:
>> > Currently, TCON supports 2 ways to match TCON with engine (mixer in this
>> > case). Old way is to just traverse of graph backwards and compare node
>> > pointer. New way is to match TCON and engine by their respective ids.
>> > All SoCs with DE2 enabled till now used the old way, which means mixer
>> > id was never used and thus never implemented.
>> >
>> > However, for R40, only the new way will be used. To prepare for that,
>> > implement mixer id fetching from DT.
>> >
>> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
>> > ---
>> >
>> > drivers/gpu/drm/sun4i/sun8i_mixer.c | 40 +++++++++++++++++++++++++++--
>> > 1 file changed, 38 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c
>> > b/drivers/gpu/drm/sun4i/sun8i_mixer.c index aa81b9838ae8..4bd4d8ccb34f
>> > 100644
>> > --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
>> > +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
>> > @@ -22,6 +22,7 @@
>> >
>> > #include <linux/component.h>
>> > #include <linux/dma-mapping.h>
>> > #include <linux/of_device.h>
>> >
>> > +#include <linux/of_graph.h>
>> >
>> > #include <linux/reset.h>
>> >
>> > #include "sun4i_drv.h"
>> >
>> > @@ -322,6 +323,42 @@ static struct regmap_config sun8i_mixer_regmap_config
>> > = {>
>> > .max_register = 0xbfffc, /* guessed */
>> >
>> > };
>> >
>> > +static int sun8i_mixer_of_get_id(struct device_node *node)
>> > +{
>> > + struct device_node *port, *ep;
>> > + int ret = -EINVAL;
>> > +
>> > + /* output is port 1 */
>> > + port = of_graph_get_port_by_id(node, 1);
>> > + if (!port)
>> > + return -EINVAL;
>> > +
>> > + /* try to find downstream endpoint */
>> > + for_each_available_child_of_node(port, ep) {
>> > + struct device_node *remote;
>> > + u32 reg;
>> > +
>> > + remote = of_graph_get_remote_endpoint(ep);
>> > + if (!remote)
>> > + continue;
>> > +
>> > + ret = of_property_read_u32(remote, "reg", &reg);
>> > + if (!ret) {
>> > + of_node_put(remote);
>> > + of_node_put(ep);
>> > + of_node_put(port);
>> > +
>> > + return reg;
>> > + }
>> > +
>> > + of_node_put(remote);
>> > + }
>> > +
>> > + of_node_put(port);
>> > +
>> > + return ret;
>> > +}
>> > +
>>
>> The above looks good.
>>
>> > static int sun8i_mixer_bind(struct device *dev, struct device *master,
>> >
>> > void *data)
>> >
>> > {
>> >
>> > @@ -353,8 +390,7 @@ static int sun8i_mixer_bind(struct device *dev, struct
>> > device *master,>
>> > dev_set_drvdata(dev, mixer);
>> > mixer->engine.ops = &sun8i_engine_ops;
>> > mixer->engine.node = dev->of_node;
>> >
>> > - /* The ID of the mixer currently doesn't matter */
>> > - mixer->engine.id = -1;
>> > + mixer->engine.id = sun8i_mixer_of_get_id(dev->of_node);
>>
>> Should you be handling error codes?
>
> Sadly, no. Other supported DE2 SoC miss reg property in DT and it would break
> them. Additionally, V3s has only one mixer and thus technically doesn't
> violate binding with omiting mixer id.
>
> Anyway, it was -1 all the time before and not really used, so having negative
> value doesn't change anything for other SoCs. If this fails and it's needed,
> it would stop at mixer <-> TCON matching stage anyway.
>
> I guess I should add comment for that.

Yes. Please. We'll leave the rest till later. I plan to fix up the missing
IDs for all the other SoCs anyway.

ChenYu

\
 
 \ /
  Last update: 2018-07-11 09:13    [W:0.037 / U:1.344 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site