lkml.org 
[lkml]   [2018]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 04/10] dt-bindings: i3c: Document core bindings
On Wed, Jul 11, 2018 at 4:45 PM, Boris Brezillon
<boris.brezillon@bootlin.com> wrote:
> On Wed, 11 Jul 2018 16:10:10 +0200
> Arnd Bergmann <arnd@arndb.de> wrote:
>
>> On Fri, Jun 22, 2018 at 12:49 PM, Boris Brezillon
>> <boris.brezillon@bootlin.com> wrote:
>> > A new I3C subsystem has been added and a generic description has been
>> > created to represent the I3C bus and the devices connected on it.
>> >
>>
>> > +I2C devices
>> > +===========
>> > +
>> > +Each I2C device connected to the bus should be described in a subnode. All
>> > +properties described in Documentation/devicetree/bindings/i2c/i2c.txt are
>> > +valid here, but several new properties have been added.
>> > +
>> > +New constraint on existing properties:
>> > +--------------------------------------
>> ...
>> > + + third cell: should be 0
>>
>> What for? Just to be future-proof, or do you have something specific
>> in mind here?
>
> Even if I2C devices only need 1 cell, I3C devices need 3 (1 for the
> static address and 2 for the PID). Since both type of devices are
> described under the same bus node, and we can have different
> #address-cells, I had to put 0-padding in the last cell.

Ok, got it.

Arnd
\
 
 \ /
  Last update: 2018-07-15 22:05    [W:0.272 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site