lkml.org 
[lkml]   [2018]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
Date
From: Nicolas Ferre <nicolas.ferre@microchip.com>

In atmel_shutdown() we call atmel_stop_rx() and atmel_stop_tx() functions.
Prevent the rx restart that is implemented in RS485 or ISO7816 modes when
calling atmel_stop_tx() by using the atomic information tasklet_shutdown
that is already in place for this purpose.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
drivers/tty/serial/atmel_serial.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 0118b219f3a8..e4f877e1f3c6 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -617,7 +617,9 @@ static void atmel_stop_tx(struct uart_port *port)
if (((port->rs485.flags & SER_RS485_ENABLED) &&
!(port->rs485.flags & SER_RS485_RX_DURING_TX)) ||
port->iso7816.flags & SER_ISO7816_ENABLED)
- atmel_start_rx(port);
+ if (!atomic_read(&atmel_port->tasklet_shutdown))
+ atmel_start_rx(port);
+
}

/*
--
2.12.2
\
 
 \ /
  Last update: 2018-07-11 15:21    [W:0.089 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site