lkml.org 
[lkml]   [2018]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 1/4] dmaengine: imx-sdma: add memcpy interface
Hi Robin,

On 11-07-18, 00:23, Robin Gong wrote:
> Add MEMCPY support, meanwhile, add SDMA_BD_MAX_CNT instead
> of '0xffff'.

latter part should be its own patch. Never mix things

> +static struct dma_async_tx_descriptor *sdma_prep_memcpy(
> + struct dma_chan *chan, dma_addr_t dma_dst,
> + dma_addr_t dma_src, size_t len, unsigned long flags)
> +{
> + struct sdma_channel *sdmac = to_sdma_chan(chan);
> + struct sdma_engine *sdma = sdmac->sdma;
> + int channel = sdmac->channel;
> + size_t count;
> + int i = 0, param;
> + struct sdma_buffer_descriptor *bd;
> + struct sdma_desc *desc;
> +
> + if (!chan || !len)
> + return NULL;
> +
> + dev_dbg(sdma->dev, "memcpy: %pad->%pad, len=%zu, channel=%d.\n",
> + &dma_src, &dma_dst, len, channel);
> +
> + desc = sdma_transfer_init(sdmac, DMA_MEM_TO_MEM, len / SDMA_BD_MAX_CNT
> + + 1);

this looks quite odd to read consider:

esc = sdma_transfer_init(sdmac, DMA_MEM_TO_MEM,
len / SDMA_BD_MAX_CNT + 1);

> + if (!desc)
> + goto err_out;
> +
> + do {
> + count = min_t(size_t, len, SDMA_BD_MAX_CNT);
> + bd = &desc->bd[i];
> + bd->buffer_addr = dma_src;
> + bd->ext_buffer_addr = dma_dst;
> + bd->mode.count = count;
> + desc->chn_count += count;
> +
> + switch (sdmac->word_size) {
> + case DMA_SLAVE_BUSWIDTH_4_BYTES:

This looks wrong, we are in memcpy, there is no SLAVE so no SLAVE
widths..

> static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
> struct dma_chan *chan, struct scatterlist *sgl,
> unsigned int sg_len, enum dma_transfer_direction direction,
> @@ -1344,9 +1431,9 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
>
> count = sg_dma_len(sg);
>
> - if (count > 0xffff) {
> + if (count > SDMA_BD_MAX_CNT) {
> dev_err(sdma->dev, "SDMA channel %d: maximum bytes for sg entry exceeded: %d > %d\n",
> - channel, count, 0xffff);
> + channel, count, SDMA_BD_MAX_CNT);

these changes dont belong to this patch

> @@ -1486,6 +1573,8 @@ static int sdma_config(struct dma_chan *chan,
> sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst << 16) &
> SDMA_WATERMARK_LEVEL_HWML;
> sdmac->word_size = dmaengine_cfg->dst_addr_width;
> + } else if (dmaengine_cfg->direction == DMA_MEM_TO_MEM) {
> + sdmac->word_size = dmaengine_cfg->dst_addr_width;

same here too, we are in .device_config which deals with slave. Not
memcpy!

> } else {
> sdmac->per_address = dmaengine_cfg->dst_addr;
> sdmac->watermark_level = dmaengine_cfg->dst_maxburst *
> @@ -1902,6 +1991,7 @@ static int sdma_probe(struct platform_device *pdev)
>
> dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask);
> dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask);
> + dma_cap_set(DMA_MEMCPY, sdma->dma_device.cap_mask);
>
> INIT_LIST_HEAD(&sdma->dma_device.channels);
> /* Initialize channel parameters */
> @@ -1968,9 +2058,11 @@ static int sdma_probe(struct platform_device *pdev)
> sdma->dma_device.dst_addr_widths = SDMA_DMA_BUSWIDTHS;
> sdma->dma_device.directions = SDMA_DMA_DIRECTIONS;
> sdma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
> + sdma->dma_device.device_prep_dma_memcpy = sdma_prep_memcpy;
> sdma->dma_device.device_issue_pending = sdma_issue_pending;
> sdma->dma_device.dev->dma_parms = &sdma->dma_parms;
> - dma_set_max_seg_size(sdma->dma_device.dev, 65535);
> + sdma->dma_device.copy_align = DMAENGINE_ALIGN_4_BYTES;
> + dma_set_max_seg_size(sdma->dma_device.dev, SDMA_BD_MAX_CNT);

this line should not be part of this patch

--
~Vinod

\
 
 \ /
  Last update: 2018-07-10 17:30    [W:0.143 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site