lkml.org 
[lkml]   [2018]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4.9] PM / OPP: Update voltage in case freq == old_freq
On Mon, Jul 02, 2018 at 02:19:47PM +0530, Viresh Kumar wrote:
> From: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com>
>
> Original commit c5c2a97b3ac7 ("PM / OPP: Update voltage in case freq ==
> old_freq").
>
> This commit fixes a rare but possible case when the clk rate is updated
> without update of the regulator voltage.
>
> At boot up, CPUfreq checks if the system is running at the right freq. This
> is a sanity check in case a bootloader set clk rate that is outside of freq
> table present with cpufreq core. In such cases system can be unstable so
> better to change it to a freq that is preset in freq-table.
>
> The CPUfreq takes next freq that is >= policy->cur and this is our
> target_freq that needs to be set now.
>
> dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the
> old_freq (a current rate). If these are equal it returns early. If not,
> it searches for OPP (old_opp) that fits best to old_freq (not listed in
> the table) and updates old_freq (!).
>
> Here, we can end up with old_freq = old_opp.rate = target_freq, which
> is not handled in _generic_set_opp_regulator(). It's supposed to update
> voltage only when freq > old_freq || freq > old_freq.
>
> if (freq > old_freq) {
> ret = _set_opp_voltage(dev, reg, new_supply);
> [...]
> if (freq < old_freq) {
> ret = _set_opp_voltage(dev, reg, new_supply);
> if (ret)
>
> It results in, no voltage update while clk rate is updated.
>
> Example:
> freq-table = {
> 1000MHz 1.15V
> 666MHZ 1.10V
> 333MHz 1.05V
> }
> boot-up-freq = 800MHz # not listed in freq-table
> freq = target_freq = 1GHz
> old_freq = 800Mhz
> old_opp = _find_freq_ceil(opp_table, &old_freq); #(old_freq is modified!)
> old_freq = 1GHz
>
> Fixes: 6a0712f6f199 ("PM / OPP: Add dev_pm_opp_set_rate()")
> Cc: 4.6+ <stable@vger.kernel.org> # v4.6+
> Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> Sending it for stable kernels from 4.6 until 4.9.

Always give me a hint as to what the original commit is, otherwise I
have to go dig for it :(

greg k-h

\
 
 \ /
  Last update: 2018-07-10 15:59    [W:0.055 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site