lkml.org 
[lkml]   [2018]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v3] watchdog: sp805: Add clock-frequency property
Date
When using ACPI node, binding clock devices are
not available as device tree, So clock-frequency
property given in _DSD object of ACPI device is
used to calculate Watchdog rate.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
---
drivers/watchdog/sp805_wdt.c | 35 +++++++++++++++++++++++++----------
1 file changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 9849db0..a896b1c 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -11,6 +11,7 @@
* warranty of any kind, whether express or implied.
*/

+#include <linux/acpi.h>
#include <linux/device.h>
#include <linux/resource.h>
#include <linux/amba/bus.h>
@@ -22,6 +23,7 @@
#include <linux/math64.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/of.h>
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -65,6 +67,7 @@ struct sp805_wdt {
spinlock_t lock;
void __iomem *base;
struct clk *clk;
+ u64 rate;
struct amba_device *adev;
unsigned int load_val;
};
@@ -80,7 +83,7 @@ static int wdt_setload(struct watchdog_device *wdd, unsigned int timeout)
struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
u64 load, rate;

- rate = clk_get_rate(wdt->clk);
+ rate = wdt->rate;

/*
* sp805 runs counter with given value twice, after the end of first
@@ -106,9 +109,7 @@ static int wdt_setload(struct watchdog_device *wdd, unsigned int timeout)
static unsigned int wdt_timeleft(struct watchdog_device *wdd)
{
struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
- u64 load, rate;
-
- rate = clk_get_rate(wdt->clk);
+ u64 load;

spin_lock(&wdt->lock);
load = readl_relaxed(wdt->base + WDTVALUE);
@@ -118,7 +119,7 @@ static unsigned int wdt_timeleft(struct watchdog_device *wdd)
load += wdt->load_val + 1;
spin_unlock(&wdt->lock);

- return div_u64(load, rate);
+ return div_u64(load, wdt->rate);
}

static int
@@ -228,11 +229,25 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
if (IS_ERR(wdt->base))
return PTR_ERR(wdt->base);

- wdt->clk = devm_clk_get(&adev->dev, NULL);
- if (IS_ERR(wdt->clk)) {
- dev_warn(&adev->dev, "Clock not found\n");
- ret = PTR_ERR(wdt->clk);
- goto err;
+ if (adev->dev.of_node) {
+ wdt->clk = devm_clk_get(&adev->dev, NULL);
+ if (IS_ERR(wdt->clk)) {
+ dev_err(&adev->dev, "Clock not found\n");
+ return PTR_ERR(wdt->clk);
+ }
+ wdt->rate = clk_get_rate(wdt->clk);
+ } else if (has_acpi_companion(&adev->dev)) {
+ /*
+ * When Driver probe with ACPI device, clock devices
+ * are not available, so watchdog rate get from
+ * clock-frequency property given in _DSD object.
+ */
+ device_property_read_u64(&adev->dev, "clock-frequency",
+ &wdt->rate);
+ if (!wdt->rate) {
+ dev_err(&adev->dev, "no clock-frequency property\n");
+ return -ENODEV;
+ }
}

wdt->adev = adev;
--
2.7.4
\
 
 \ /
  Last update: 2018-07-10 10:45    [W:0.073 / U:5.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site