lkml.org 
[lkml]   [2018]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/9] x86/cet: Control protection exception handler
From
Date
On Thu, 2018-06-07 at 08:46 -0700, Andy Lutomirski wrote:
> On Thu, Jun 7, 2018 at 7:40 AM Yu-cheng Yu <yu-cheng.yu@intel.com> wrote:
> >

...

> > diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
> > index bef8e2b202a8..14b63ef0d7d8 100644
> > --- a/arch/x86/entry/entry_32.S
> > +++ b/arch/x86/entry/entry_32.S
> > @@ -1070,6 +1070,11 @@ ENTRY(general_protection)
> > jmp common_exception
> > END(general_protection)
> >
> > +ENTRY(control_protection)
> > + pushl $do_control_protection
> > + jmp common_exception
> > +END(control_protection)
>
> Ugh, you're seriously supporting this on 32-bit? Please test double
> fault handling very carefully -- the CET interaction with task
> switches is so gross that I didn't even bother reading the spec except
> to let the architects know that they were a but nuts to support it at
> all.
>

I will remove this.

...

> > diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
> > index 03f3d7695dac..4e8769a19aaf 100644
> > --- a/arch/x86/kernel/traps.c
> > +++ b/arch/x86/kernel/traps.c
>
> > +/*
> > + * When a control protection exception occurs, send a signal
> > + * to the responsible application. Currently, control
> > + * protection is only enabled for the user mode. This
> > + * exception should not come from the kernel mode.
> > + */
> > +dotraplinkage void
> > +do_control_protection(struct pt_regs *regs, long error_code)
> > +{
> > + struct task_struct *tsk;
> > +
> > + RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
> > + cond_local_irq_enable(regs);
> > +
> > + tsk = current;
> > + if (!cpu_feature_enabled(X86_FEATURE_SHSTK) &&
> > + !cpu_feature_enabled(X86_FEATURE_IBT)) {
>
> static_cpu_has(), please. But your handling here is odd -- I think
> that we should at least warn if we get #CP with CET disable.

I will fix it.

>
> > + goto exit;
> > + }
> > +
> > + if (!user_mode(regs)) {
> > + tsk->thread.error_code = error_code;
> > + tsk->thread.trap_nr = X86_TRAP_CP;
>
> I realize you copied this from elsewhere in the file, but please
> either delete these assignments to error_code and trap_nr or at least
> hoist them out of the if block.

I will fix it.

>
> > + if (notify_die(DIE_TRAP, "control protection fault", regs,
> > + error_code, X86_TRAP_CP, SIGSEGV) != NOTIFY_STOP)
>
> Does this notify_die() check serve any purpose at all? Removing all
> the old ones would be a project, but let's try not to add new callers.

OK.

>
> > + die("control protection fault", regs, error_code);
> > + return;
> > + }
> > +
> > + tsk->thread.error_code = error_code;
> > + tsk->thread.trap_nr = X86_TRAP_CP;
> > +
> > + if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
> > + printk_ratelimit()) {
> > + unsigned int max_idx, err_idx;
> > +
> > + max_idx = ARRAY_SIZE(control_protection_err) - 1;
> > + err_idx = min((unsigned int)error_code - 1, max_idx);
>
> What if error_code == 0? Is that also invalid?

The error code is between 1 and 5 inclusive. I thought if it is 0, then
err_idx would become max_idx here. I can change it to:

if (error_code == 0)
error_code = max_idx;

Or, add some comments for this case.

>
> > + pr_info("%s[%d] control protection ip:%lx sp:%lx error:%lx(%s)",
> > + tsk->comm, task_pid_nr(tsk),
> > + regs->ip, regs->sp, error_code,
> > + control_protection_err[err_idx]);
> > + print_vma_addr(" in ", regs->ip);
> > + pr_cont("\n");
> > + }
> > +
> > +exit:
> > + force_sig_info(SIGSEGV, SEND_SIG_PRIV, tsk);
>
> This is definitely wrong for the feature-disabled, !user_mode case.
>

I will fix it.

> Also, are you planning on enabling CET for kernel code too?

Yes, kernel protection will be enabled later.


\
 
 \ /
  Last update: 2018-06-07 18:27    [W:0.227 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site