lkml.org 
[lkml]   [2018]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Date
    Subject[PATCH 3.16 004/410] x86/microcode/AMD: Do not load when running on a hypervisor
    3.16.57-rc1 review patch.  If anyone has any objections, please let me know.

    ------------------

    From: Borislav Petkov <bp@suse.de>

    commit a15a753539eca8ba243d576f02e7ca9c4b7d7042 upstream.

    Doing so is completely void of sense for multiple reasons so prevent
    it. Set dis_ucode_ldr to true and thus disable the microcode loader by
    default to address xen pv guests which execute the AP path but not the
    BSP path.

    By having it turned off by default, the APs won't run into the loader
    either.

    Also, check CPUID(1).ECX[31] which hypervisors set. Well almost, not the
    xen pv one. That one gets the aforementioned "fix".

    Also, improve the detection method by caching the final decision whether
    to continue loading in dis_ucode_ldr and do it once on the BSP. The APs
    then simply test that value.

    Signed-off-by: Borislav Petkov <bp@suse.de>
    Tested-by: Juergen Gross <jgross@suse.com>
    Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
    Acked-by: Juergen Gross <jgross@suse.com>
    Link: http://lkml.kernel.org/r/20161218164414.9649-4-bp@alien8.de
    Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
    Cc: Rolf Neugebauer <rolf.neugebauer@docker.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    [bwh: Backported to 3.16:
    - Early microcode loader is optional, so only set dis_ucode_ldr by default
    if it is enabled
    - Adjust context, filename]
    Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
    ---
    --- a/arch/x86/kernel/cpu/microcode/core.c
    +++ b/arch/x86/kernel/cpu/microcode/core.c
    @@ -97,7 +97,7 @@ MODULE_LICENSE("GPL");

    static struct microcode_ops *microcode_ops;

    -bool dis_ucode_ldr;
    +bool dis_ucode_ldr = IS_ENABLED(CONFIG_MICROCODE_EARLY);
    module_param(dis_ucode_ldr, bool, 0);

    /*
    --- a/arch/x86/kernel/cpu/microcode/core_early.c
    +++ b/arch/x86/kernel/cpu/microcode/core_early.c
    @@ -76,6 +76,8 @@ static int x86_family(void)

    static bool __init check_loader_disabled_bsp(void)
    {
    + u32 a, b, c, d;
    +
    #ifdef CONFIG_X86_32
    const char *cmdline = (const char *)__pa_nodebug(boot_command_line);
    const char *opt = "dis_ucode_ldr";
    @@ -88,8 +90,23 @@ static bool __init check_loader_disabled
    bool *res = &dis_ucode_ldr;
    #endif

    - if (cmdline_find_option_bool(cmdline, option))
    - *res = true;
    + if (!have_cpuid_p())
    + return *res;
    +
    + a = 1;
    + c = 0;
    + native_cpuid(&a, &b, &c, &d);
    +
    + /*
    + * CPUID(1).ECX[31]: reserved for hypervisor use. This is still not
    + * completely accurate as xen pv guests don't see that CPUID bit set but
    + * that's good enough as they don't land on the BSP path anyway.
    + */
    + if (c & BIT(31))
    + return *res;
    +
    + if (cmdline_find_option_bool(cmdline, option) <= 0)
    + *res = false;

    return *res;
    }
    @@ -101,9 +118,6 @@ void __init load_ucode_bsp(void)
    if (check_loader_disabled_bsp())
    return;

    - if (!have_cpuid_p())
    - return;
    -
    vendor = x86_vendor();
    x86 = x86_family();

    @@ -137,9 +151,6 @@ void load_ucode_ap(void)
    if (check_loader_disabled_ap())
    return;

    - if (!have_cpuid_p())
    - return;
    -
    vendor = x86_vendor();
    x86 = x86_family();

    \
     
     \ /
      Last update: 2018-06-07 18:14    [W:4.048 / U:0.576 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site