lkml.org 
[lkml]   [2018]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 2/5] efi: Add embedded peripheral firmware support
From
Date
Hi,

On 05-06-18 23:07, Luis R. Rodriguez wrote:
> On Fri, Jun 01, 2018 at 02:53:27PM +0200, Hans de Goede wrote:
>> Just like with PCI options ROMs, which we save in the setup_efi_pci*
>> functions from arch/x86/boot/compressed/eboot.c, the EFI code / ROM itself
>> sometimes may contain data which is useful/necessary for peripheral drivers
>> to have access to.
>>
>> Specifically the EFI code may contain an embedded copy of firmware which
>> needs to be (re)loaded into the peripheral. Normally such firmware would be
>> part of linux-firmware, but in some cases this is not feasible, for 2
>> reasons:
>>
>> 1) The firmware is customized for a specific use-case of the chipset / use
>> with a specific hardware model, so we cannot have a single firmware file
>> for the chipset. E.g. touchscreen controller firmwares are compiled
>> specifically for the hardware model they are used with, as they are
>> calibrated for a specific model digitizer.
>>
>> 2) Despite repeated attempts we have failed to get permission to
>> redistribute the firmware. This is especially a problem with customized
>> firmwares, these get created by the chip vendor for a specific ODM and the
>> copyright may partially belong with the ODM, so the chip vendor cannot
>> give a blanket permission to distribute these.
>>
>> This commit adds support for finding peripheral firmware embedded in the
>> EFI code and making this available to peripheral drivers through the
>> standard firmware loading mechanism.
>>
>> Note we check the EFI_BOOT_SERVICES_CODE for embedded firmware near the end
>> of start_kernel(), just before calling rest_init(), this is on purpose
>> because the typical EFI_BOOT_SERVICES_CODE memory-segment is too large for
>> early_memremap(), so the check must be done after mm_init(). This relies
>> on EFI_BOOT_SERVICES_CODE not being free-ed until efi_free_boot_services()
>> is called, which means that this will only work on x86 for now.
>>
>> Reported-by: Dave Olsthoorn <dave@bewaar.me>
>> Suggested-by: Peter Jones <pjones@redhat.com>
>> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> Changes in v6:
>> -Rework code to remove casts from if (prefix == mem) comparison
>> -Use SHA256 hashes instead of crc32 sums
>> -Add new READING_FIRMWARE_EFI_EMBEDDED read_file_id and use it
>> -Call security_kernel_read_file(NULL, READING_FIRMWARE_EFI_EMBEDDED)
>> to check if this is allowed before looking at EFI embedded fw
>> -Document why we are not using the PI Firmware Volume protocol
>>
>> Changes in v5:
>> -Rename the EFI_BOOT_SERVICES flag to EFI_PRESERVE_BS_REGIONS
>>
>> Changes in v4:
>> -Drop note in docs about EFI_FIRMWARE_VOLUME_PROTOCOL, it is not part of
>> UEFI proper, so the EFI maintainers don't want us referring people to it
>> -Use new EFI_BOOT_SERVICES flag
>> -Put the new fw_get_efi_embedded_fw() function in its own fallback_efi.c
>> file which only gets built when EFI_EMBEDDED_FIRMWARE is selected
>> -Define an empty stub for fw_get_efi_embedded_fw() in fallback.h hwen
>> EFI_EMBEDDED_FIRMWARE is not selected, to avoid the need for #ifdefs
>> in firmware_loader/main.c
>> -Properly call security_kernel_post_read_file() on the firmware returned
>> by efi_get_embedded_fw() to make sure that we are allowed to use it
>>
>> Changes in v3:
>> -Fix the docs using "efi-embedded-fw" as property name instead of
>> "efi-embedded-firmware"
>>
>> Changes in v2:
>> -Rebased on driver-core/driver-core-next
>> -Add documentation describing the EFI embedded firmware mechanism to:
>> Documentation/driver-api/firmware/request_firmware.rst
>> -Add a new EFI_EMBEDDED_FIRMWARE Kconfig bool and only build the embedded
>> fw support if this is set. This is an invisible option which should be
>> selected by drivers which need this
>> -Remove the efi_embedded_fw_desc and dmi_system_id-s for known devices
>> from the efi-embedded-fw code, instead drivers using this are expected to
>> export a dmi_system_id array, with each entries' driver_data pointing to a
>> efi_embedded_fw_desc struct and register this with the efi-embedded-fw code
>> -Use kmemdup to make a copy instead of efi_mem_reserve()-ing the firmware,
>> this avoids us messing with the EFI memmap and avoids the need to make
>> changes to efi_mem_desc_lookup()
>> -Make the firmware-loader code only fallback to efi_get_embedded_fw() if the
>> passed in device has the "efi-embedded-firmware" device-property bool set
>> -Skip usermodehelper fallback when "efi-embedded-firmware" device-property
>> is set
>> ---
>> .../driver-api/firmware/request_firmware.rst | 76 +++++++++
>> drivers/base/firmware_loader/Makefile | 1 +
>> drivers/base/firmware_loader/fallback.h | 12 ++
>> drivers/base/firmware_loader/fallback_efi.c | 56 +++++++
>> drivers/base/firmware_loader/main.c | 2 +
>> drivers/firmware/efi/Kconfig | 3 +
>> drivers/firmware/efi/Makefile | 1 +
>> drivers/firmware/efi/embedded-firmware.c | 148 ++++++++++++++++++
>> include/linux/efi.h | 6 +
>> include/linux/efi_embedded_fw.h | 25 +++
>> include/linux/fs.h | 1 +
>> init/main.c | 3 +
>> 12 files changed, 334 insertions(+)
>> create mode 100644 drivers/base/firmware_loader/fallback_efi.c
>> create mode 100644 drivers/firmware/efi/embedded-firmware.c
>> create mode 100644 include/linux/efi_embedded_fw.h
>>
>> diff --git a/Documentation/driver-api/firmware/request_firmware.rst b/Documentation/driver-api/firmware/request_firmware.rst
>> index f62bdcbfed5b..66ab91f3357d 100644
>> --- a/Documentation/driver-api/firmware/request_firmware.rst
>> +++ b/Documentation/driver-api/firmware/request_firmware.rst
>> @@ -73,3 +73,79 @@ If something went wrong request_firmware() returns non-zero and fw_entry
>> is set to NULL. Once your driver is done with processing the firmware it
>> can call call release_firmware(fw_entry) to release the firmware image
>> and any related resource.
>> +
>> +EFI embedded firmware support
>> +=============================
>> +
>> +On some devices the system's EFI code / ROM may contain an embedded copy
>> +of firmware for some of the system's integrated peripheral devices and
>> +the peripheral's Linux device-driver needs to access this firmware.
>> +
>> +A device driver which needs this can describe the firmware it needs
>> +using an efi_embedded_fw_desc struct:
>> +
>> +.. kernel-doc:: include/linux/efi_embedded_fw.h
>> + :functions: efi_embedded_fw_desc
>> +
>> +The EFI embedded-fw code works by scanning all EFI_BOOT_SERVICES_CODE memory
>> +segments for an eight byte sequence matching prefix, if the prefix is found it
>> +then does a crc32
>
> You still refer to crc32 here. This needs to be updated.

Ack.

>> over length bytes and if that matches makes a copy of length
>> +bytes and adds that to its list with found firmwares.
>> +
>> +To avoid doing this somewhat expensive scan on all systems, dmi matching is
>> +used. Drivers are expected to export a dmi_system_id array, with each entries'
>> +driver_data pointing to an efi_embedded_fw_desc.
>> +
>> +To register this array with the efi-embedded-fw code, a driver needs to:
>> +
>> +1. Always be builtin to the kernel or store the dmi_system_id array in a
>> + separate object file which always gets builtin.
>> +
>> +2. Add an extern declaration for the dmi_system_id array to
>> + include/linux/efi_embedded_fw.h.
>> +
>> +3. Add the dmi_system_id array to the embedded_fw_table in
>> + drivers/firmware/efi/embedded-firmware.c wrapped in a #ifdef testing that
>> + the driver is being builtin.
>> +
>> +4. Add "select EFI_EMBEDDED_FIRMWARE if EFI_STUB" to its Kconfig entry.
>> +
>> +The request_firmware() function will always first try to load firmware with
>> +the specified name directly from the disk, so the EFI embedded-fw can always
>> +be overridden by placing a file under /lib/firmare.
>> +
>> +To make request_firmware() fallback to trying EFI embedded firmwares after this,
>> +the driver must set a boolean "efi-embedded-firmware" device-property on the
>> +device before passing it to request_firmware().
>
> No, as I have requested before I don't want this, it is silly to have such
> functionality always be considered as a fallback if we only have 2 drivers
> which need this. > Please add a call which only if used would then *evaluate*
> such fallback prospect.

Ok, so I've a few questions about this:

1) You want me to add a:

int firmware_request_with_system_firmware_fallback(struct device *device, const char *name);

function? Note I've deliberately named it with_system_firmware_fallback
and not with_efi_fallback to have the name be platform agnostic in
case we want something similar on other platforms in the future.

And then have this pass a new FW_OPT_SYS_FW_FALLBACK flag to
_request_firmware(), right ?

2) Should this flag then be checked inside _request_firmware() before it
calls fw_get_efi_embedded_fw() (which may be an empty stub), or
inside fw_get_efi_embedded_fw()?

3) Also should I then still check device_property_read_bool(dev,
"efi-embedded-firmware") inside fw_get_efi_embedded_fw(), or do you
want to simply always try the fallback if the driver indicates this ?

The reason I'm asking this is because the presence or not of the
firmware inside the system-firmware is a per board thing, not
a per driver thing. But since the firmware is unique per board
anyways it would be fine to skip the "efi-embedded-firmware"
device-prop check. If we're going to have a separate
firmware_request_with_system_firmware_fallback() function for
this then I'm leaning towards dropping the whole check myself.

So are you ok with dropping the device-prop check then ?

4) Since I'm naming the new function
int firmware_request_with_system_firmware_fallback()
I'm thinking that fw_get_efi_embedded_fw() should be renamed
to firmware_fallback_system_firmware() and the EFI based code
will just be the first (and for now only) provider of this
fallback with an empty stub (inline in the .h file) for when
there is no provider defined. Do you agree with renaming
fw_get_efi_embedded_fw() to
firmware_request_with_system_firmware_fallback() ?

(note this is the wrapper which calls efi_get_embedded_fw()
which itself will not be renamed of course).

Regards,

Hans

\
 
 \ /
  Last update: 2018-06-06 20:39    [W:0.077 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site