lkml.org 
[lkml]   [2018]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/6] mtd: rawnand: tegra: add devicetree binding
On 06.06.2018 13:07, Thierry Reding wrote:
> On Wed, Jun 06, 2018 at 12:45:40PM +0200, Boris Brezillon wrote:
>> Hi Thierry,
>>
>> On Wed, 6 Jun 2018 12:39:03 +0200
>> Thierry Reding <thierry.reding@gmail.com> wrote:
>>
>> > On Tue, Jun 05, 2018 at 11:19:14PM +0300, Dmitry Osipenko wrote:
>> > > On 01.06.2018 10:30, Boris Brezillon wrote:
>> > > > On Fri, 1 Jun 2018 00:16:34 +0200
>> > > > Stefan Agner <stefan@agner.ch> wrote:
>> > > >
>> > > >> This adds the devicetree binding for the Tegra 2 NAND flash
>> > > >> controller.
>> > > >>
>> > > >> Signed-off-by: Lucas Stach <dev@lynxeye.de>
>> > > >> Signed-off-by: Stefan Agner <stefan@agner.ch>
>> > > >> ---
>> > > >> .../bindings/mtd/nvidia-tegra20-nand.txt | 64 +++++++++++++++++++
>> > > >> 1 file changed, 64 insertions(+)
>> > > >> create mode 100644 Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
>> > > >>
>> > > >> diff --git a/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt b/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
>> > > >> new file mode 100644
>> > > >> index 000000000000..5cd984ef046b
>> > > >> --- /dev/null
>> > > >> +++ b/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
>> > > >> @@ -0,0 +1,64 @@
>> > > >> +NVIDIA Tegra NAND Flash controller
>> > > >> +
>> > > >> +Required properties:
>> > > >> +- compatible: Must be one of:
>> > > >> + - "nvidia,tegra20-nand"
>> > > >
>> > > > As discussed previously, I prefer "nvidia,tegra20-nand-controller" or
>> > > > "nvidia,tegra20-nfc".
>> > > >
>> > > >> +- reg: MMIO address range
>> > > >> +- interrupts: interrupt output of the NFC controller
>> > > >> +- clocks: Must contain an entry for each entry in clock-names.
>> > > >> + See ../clocks/clock-bindings.txt for details.
>> > > >> +- clock-names: Must include the following entries:
>> > > >> + - nand
>> > > >> +- resets: Must contain an entry for each entry in reset-names.
>> > > >> + See ../reset/reset.txt for details.
>> > > >> +- reset-names: Must include the following entries:
>> > > >> + - nand
>> > > >> +
>> > > >> +Optional children nodes:
>> > > >> +Individual NAND chips are children of the NAND controller node. Currently
>> > > >> +only one NAND chip supported.
>> > > >> +
>> > > >> +Required children node properties:
>> > > >> +- reg: An integer ranging from 1 to 6 representing the CS line to use.
>> > > >> +
>> > > >> +Optional children node properties:
>> > > >> +- nand-ecc-mode: String, operation mode of the NAND ecc mode. Currently only
>> > > >> + "hw" is supported.
>> > > >> +- nand-ecc-algo: string, algorithm of NAND ECC.
>> > > >> + Supported values with "hw" ECC mode are: "rs", "bch".
>> > > >> +- nand-bus-width : See nand.txt
>> > > >> +- nand-on-flash-bbt: See nand.txt
>> > > >> +- nand-ecc-strength: integer representing the number of bits to correct
>> > > >> + per ECC step (always 512). Supported strength using HW ECC
>> > > >> + modes are:
>> > > >> + - RS: 4, 6, 8
>> > > >> + - BCH: 4, 8, 14, 16
>> > > >> +- nand-ecc-maximize: See nand.txt
>> > > >> +- nand-is-boot-medium: Makes sure only ECC strengths supported by the boot ROM
>> > > >> + are choosen.
>> > > >> +- wp-gpios: GPIO specifier for the write protect pin.
>> > > >> +
>> > > >> +Optional child node of NAND chip nodes:
>> > > >> +Partitions: see partition.txt
>> > > >> +
>> > > >> + Example:
>> > > >> + nand@70008000 {
>> > > >
>> > > > nand-controller@70008000 {
>> > > >
>> > > >> + compatible = "nvidia,tegra20-nand";
>> > > >
>> > > > compatible = "nvidia,tegra20-nand-controller";
>> > > >
>> > > > or
>> > > >
>> > > > compatible = "nvidia,tegra20-nfc";
>> > > >
>> > >
>> > > Maybe it's just me, but when I'm reading "nfc", my first association is the
>> > > "Near Field Communication". Probably an explicit
>> > > "nvidia,tegra20-nand-controller" variant is more preferable.
>>
>> I also prefer nvidia,tegra20-nand-controller.
>>
>> >
>> > We don't really use a -controller suffix for any of the other
>> > controllers because it is kind of implied. "nfc" is also not something
>> > that is ever referred to in the technical documentation.
>> >
>> > "nvidia,tegra20-nand" would be most consistent with all the rest of
>> > Tegra (c.f. "nvidia,tegra*-ahci", "nvidia,tegra*-pci",
>> > "nvidia,tegra*-hda", "nvidia,tegra*-gmi", ...).
>>
>> People get confused about what this node represents when you just have
>> "nvidia,tegra20-nand", and then you start seeing NAND related props or
>> partition nodes being defined under the NAND controller node.
>> I really prefer to have the "-controller" prefix here to avoid such
>> confusions.
>
> Hmm... odd. I mean, the node is already called nand-controller@...,
> which makes it pretty obvious to me that this represents a controller
> rather than a NAND chip. Also, the placement of this in the DT hierarchy
> should make it pretty obvious that it is a controller since you can't
> just put a NAND chip directly on the CPU's address bus.
>
> In addition I think the nvidia,tegra* part already pretty strongly
> suggests that this is part of an SoC, so further implies "controller".

The reference manual states:
"16.0 NAND FLASH CONTROLLER

The NAND flash controller allows Tegra 2 Processor to access NAND flash
memories for mass storage."

So I guess "nvidia,tegra20-nand-flash-controller" would be most
explicit. But the manual also has "GPIO controller" and we use
"nvidia,tegra20-gpio" as compatible string.

I dislike nfc since it is an increasingly less known abbreviation and
not used in the reference manual at all.

"nvidia,tegra20-nand" or "nvidia,tegra20-nand-flash-controller" is fine
for me...

--
Stefan

\
 
 \ /
  Last update: 2018-06-06 14:15    [W:0.035 / U:2.516 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site