lkml.org 
[lkml]   [2018]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] drm/vc4: Enable the DSI module and link before other enables.
From
Date
On 04.06.2018 21:44, Eric Anholt wrote:
> We want the DSI PHY to be enabled and the DSI module clocked before a
> panel or bridge's prepare() function, since most DSI panel drivers
> with a prepare() hook are doing DCS transactions inside of them.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> Cc: Kevin Quigley <kevin@kquigley.co.uk>
> Cc: James Hughes <james.hughes@raspberrypi.org>
> Cc: Boris Brezillon <boris.brezillon@bootlin.com>
> ---
>
> I'm not sure it makes sense to enable CRTCs before encoders on vc4 at
> all. Why start scanning pixels before the encoder is ready to hear
> about VSTART? However, this patch will hopefully unblock people
> trying to attach other panels to rpi

But this patch is about enabling encoder before panel/bridge prepare. Or
am I missing something.
Anyway I would be more precise here, MIPI-DSI bus is used for two things:
- control bus - accessing DSI device (configuration/detection,...),
- video data bus - sending video stream.

I suspect in prepare/pre_enable phase of DSI panel/bridge only control
bus should be functional, video stream transfer does not make sense.
So the best solution (I guess) would be to split DSI-encoder enable
sequence into control bus enable and video transfer enable parts and
call the former before 1st transfer request from device and the latter
in encoder enable callback. Of course there will be a problem then with
disabling sequence, ie stopping video stream should be performed in
encoder's disable, but when we should disable control bus? If we do it
in encoder's disable callback we could not perform transfers in
post_disable cb of the bridge - in most cases (maybe all currently
present in kernel) it will work, but it does not look ideal.
All this recalls me discussion that hardwiring bridge callbacks into drm
core is problematic and maybe it would be better to call downstream
callbacks explicitly from upstream element - the callback order should
depend on the local bus protocol, and should not be fixed in drm core.

Regards
Andrzej

>
> drivers/gpu/drm/vc4/vc4_drv.h | 1 +
> drivers/gpu/drm/vc4/vc4_dsi.c | 3 +--
> drivers/gpu/drm/vc4/vc4_kms.c | 25 +++++++++++++++++++++++++
> 3 files changed, 27 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
> index 554a4e810d5b..e7d7bfc75acd 100644
> --- a/drivers/gpu/drm/vc4/vc4_drv.h
> +++ b/drivers/gpu/drm/vc4/vc4_drv.h
> @@ -711,6 +711,7 @@ int vc4_dpi_debugfs_regs(struct seq_file *m, void *unused);
> /* vc4_dsi.c */
> extern struct platform_driver vc4_dsi_driver;
> int vc4_dsi_debugfs_regs(struct seq_file *m, void *unused);
> +void vc4_dsi_prepare(struct drm_encoder *encoder);
>
> /* vc4_fence.c */
> extern const struct dma_fence_ops vc4_fence_ops;
> diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
> index 8aa897835118..88471731e066 100644
> --- a/drivers/gpu/drm/vc4/vc4_dsi.c
> +++ b/drivers/gpu/drm/vc4/vc4_dsi.c
> @@ -875,7 +875,7 @@ static bool vc4_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
> return true;
> }
>
> -static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
> +void vc4_dsi_prepare(struct drm_encoder *encoder)
> {
> struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
> @@ -1345,7 +1345,6 @@ static const struct mipi_dsi_host_ops vc4_dsi_host_ops = {
>
> static const struct drm_encoder_helper_funcs vc4_dsi_encoder_helper_funcs = {
> .disable = vc4_dsi_encoder_disable,
> - .enable = vc4_dsi_encoder_enable,
> .mode_fixup = vc4_dsi_encoder_mode_fixup,
> };
>
> diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
> index 8a411e5f8776..7e9b52ba3448 100644
> --- a/drivers/gpu/drm/vc4/vc4_kms.c
> +++ b/drivers/gpu/drm/vc4/vc4_kms.c
> @@ -140,6 +140,9 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
> {
> struct drm_device *dev = state->dev;
> struct vc4_dev *vc4 = to_vc4_dev(dev);
> + struct drm_connector *connector;
> + struct drm_connector_state *new_conn_state;
> + int i;
>
> drm_atomic_helper_wait_for_fences(dev, state, false);
>
> @@ -151,6 +154,28 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
>
> drm_atomic_helper_commit_planes(dev, state, 0);
>
> + /* Enable DSI link. */
> + for_each_new_connector_in_state(state, connector, new_conn_state, i) {
> + struct drm_encoder *encoder;
> + struct vc4_encoder *vc4_encoder;
> +
> + if (!new_conn_state->best_encoder)
> + continue;
> +
> + if (!new_conn_state->crtc->state->active ||
> + !drm_atomic_crtc_needs_modeset(new_conn_state->crtc->state))
> + continue;
> +
> + (void)connector;
> + encoder = new_conn_state->best_encoder;
> + vc4_encoder = to_vc4_encoder(encoder);
> +
> + if (vc4_encoder->type == VC4_ENCODER_TYPE_DSI0 ||
> + vc4_encoder->type == VC4_ENCODER_TYPE_DSI1) {
> + vc4_dsi_prepare(encoder);
> + }
> + }
> +
> drm_atomic_helper_commit_modeset_enables(dev, state);
>
> /* Make sure that drm_atomic_helper_wait_for_vblanks()


\
 
 \ /
  Last update: 2018-06-05 10:26    [W:0.045 / U:5.968 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site