lkml.org 
[lkml]   [2018]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH v4 7/8] ima: based on policy prevent loading firmware (pre-allocated buffer)
On Fri, Jun 1, 2018 at 12:25 PM, Luis R. Rodriguez <mcgrof@kernel.org> wrote:
> On Fri, Jun 01, 2018 at 09:15:45PM +0200, Luis R. Rodriguez wrote:
>> On Tue, May 29, 2018 at 02:01:59PM -0400, Mimi Zohar wrote:
>> > Some systems are memory constrained but they need to load very large
>> > firmwares. The firmware subsystem allows drivers to request this
>> > firmware be loaded from the filesystem, but this requires that the
>> > entire firmware be loaded into kernel memory first before it's provided
>> > to the driver. This can lead to a situation where we map the firmware
>> > twice, once to load the firmware into kernel memory and once to copy the
>> > firmware into the final resting place.
>> >
>> > To resolve this problem, commit a098ecd2fa7d ("firmware: support loading
>> > into a pre-allocated buffer") introduced request_firmware_into_buf() API
>> > that allows drivers to request firmware be loaded directly into a
>> > pre-allocated buffer. The QCOM_MDT_LOADER calls dma_alloc_coherent() to
>> > allocate this buffer. According to Documentation/DMA-API.txt,
>> >
>> > Consistent memory is memory for which a write by either the
>> > device or the processor can immediately be read by the processor
>> > or device without having to worry about caching effects. (You
>> > may however need to make sure to flush the processor's write
>> > buffers before telling devices to read that memory.)
>> >
>> > Devices using pre-allocated DMA memory run the risk of the firmware
>> > being accessible by the device prior to the kernel's firmware signature
>> > verification has completed.
>>
>> Indeed. And since its DMA memory we have *no idea* what can happen in
>> terms of consumption of this firmware from hardware, when it would start
>> consuming it in particular.
>>
>> If the device has its own hardware firmware verification mechanism this is
>> completely obscure to us, but it may however suffice certain security policies.
>>
>> The problem here lies in the conflicting security policies of the kernel wanting
>> to not give away firmware until its complete and the current inability to enable
>> us to have platforms suggest they trust hardware won't do something stupid.
>> This becomes an issue since the semantics of the firmware API preallocated
>> buffer do not require currently allow the kernel to inform LSMs of the fact
>> that a buffer is DMA memory or not, and a way for certain platforms then
>> to say that such use is fine for specific devices.
>>
>> Given a pointer can we determine if a piece of memory is DMA or not?
>
> FWIW
>
> Vlastimil suggests page_zone() or virt_to_page() may be able to.

I don't see a PAGEFLAG for DMA, but I do see ZONE_DMA for
page_zone()... So maybe something like

struct page *page;

page = virt_to_page(address);
if (!page)
fail closed...
if (page_zone(page) == ZONE_DMA)
handle dma case...
else
non-dma

But I've CCed Laura and Rik, who I always lean on when I have these
kinds of page questions...

-Kees

--
Kees Cook
Pixel Security

\
 
 \ /
  Last update: 2018-06-06 00:38    [W:0.075 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site