lkml.org 
[lkml]   [2018]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 12/14] fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire
Hi Ben,

On 27 June 2018 at 08:56, Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
> The Aspeed AST2x00 can contain a ColdFire v1 coprocessor which
> is currently unused on OpenPower systems.
>
> This adds an alternative to the fsi-master-gpio driver that
> uses that coprocessor instead of bit banging from the ARM
> core itself. The end result is about 4 times faster.
>
> The firmware for the coprocessor and its source code can be
> found at https://github.com/ozbenh/cf-fsi and is system specific.
>
> Currently tested on Romulus and Palmetto systems.
>
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Nice work. I gave this a spin on Romulus and it looked good.

If you run it through sparse there are a bunch of things to fix. I've
also got some comments below.

> --- /dev/null
> +++ b/drivers/fsi/cf-fsi-fw.h
> @@ -0,0 +1,131 @@


Copyright?

> +#ifndef __CF_FSI_FW_H
> +#define __CF_FSI_FW_H
> +
> +/*
> + * uCode file layout
> + *
> + * 0000...03ff : m68k exception vectors
> + * 0400...04ff : Header info & boot config block
> + * 0500....... : Code & stack
> + */

> diff --git a/drivers/fsi/fsi-master-ast-cf.c b/drivers/fsi/fsi-master-ast-cf.c
> new file mode 100644
> index 000000000000..6b17f27c27f6
> --- /dev/null
> +++ b/drivers/fsi/fsi-master-ast-cf.c
> @@ -0,0 +1,1376 @@
> +// SPDX-License-Identifier: GPL-2.0

Normally 2+ for new IBM code? You also need something like this on the
next line:

// Copyright 2018 IBM Corp

> +static int read_copro_response(struct fsi_master_acf *master, uint8_t size,
> + __be32 *response, u8 *tag)
> +{
> + u8 rtag = readb(master->sram + STAT_RTAG);
> + u8 rcrc = readb(master->sram + STAT_RCRC);
> + __be32 rdata = 0;
> + u32 crc;
> + u8 ack;
> +
> + *tag = ack = rtag & 3;
> +
> + /* we have a whole message now; check CRC */
> + crc = crc4(0, 1, 1);
> + crc = crc4(crc, rtag, 4);
> + if (ack == FSI_RESP_ACK && size) {
> + rdata = readl(master->sram + RSP_DATA);
> + crc = crc4(crc, be32_to_cpu(rdata), 32);
> + if (response)
> + *response = rdata;
> + }
> + crc = crc4(crc, rcrc, 4);
> +
> + trace_fsi_master_acf_copro_response(master, rtag, rcrc, rdata, crc == 0);
> +
> + if (crc) {
> + /*
> + * Check if it's all 1's or all 0's, that probably means
> + * the host is off
> + */
> + if ((rtag == 0xf && rcrc == 0xf) || (rtag == 0 && rcrc == 0))
> + return -ENODEV;
> + dev_dbg(master->dev, "Bad response CRC !\n");
> + return -EAGAIN;
> + }
> + return 0;
> +}
> +
> +static int send_term(struct fsi_master_acf *master, uint8_t slave)
> +{
> + struct fsi_msg cmd;
> + uint8_t tag;
> + int rc;
> +
> + build_term_command(&cmd, slave);
> +
> + rc = send_request(master, &cmd, true);
> + if (rc) {
> + dev_warn(master->dev, "Error %d sending term\n", rc);
> + return rc;
> + }
> +
> + rc = read_copro_response(master, 0, NULL, &tag);
> + if (rc < 0) {
> + dev_err(master->dev,
> + "TERM failed; lost communication with slave\n");
> + return -EIO;
> + } else if (tag != FSI_RESP_ACK) {
> + dev_err(master->dev, "TERM failed; response %d\n", tag);
> + return -EIO;
> + }
> + return 0;
> +}
> +
> +static void dump_trace(struct fsi_master_acf *master)
> +{
> + char trbuf[52];

I was checking that this was big enough.

52 = 16 * 3 + '\n' + \0' = 50?

Looks to be okay.

> + char *p;
> + int i;
> +
> + dev_dbg(master->dev,
> + "CMDSTAT:%08x RTAG=%02x RCRC=%02x RDATA=%02x #INT=%08x\n",
> + be32_to_cpu(readl(master->sram + CMD_STAT_REG)),
> + readb(master->sram + STAT_RTAG),
> + readb(master->sram + STAT_RCRC),
> + be32_to_cpu(readl(master->sram + RSP_DATA)),
> + be32_to_cpu(readl(master->sram + INT_CNT)));
> +
> + for (i = 0; i < 512; i++) {
> + uint8_t v;
> + if ((i % 16) == 0)
> + p = trbuf;
> + v = readb(master->sram + TRACEBUF + i);
> + p += sprintf(p, "%02x ", v);
> + if (((i % 16) == 15) || v == TR_END)
> + dev_dbg(master->dev, "%s\n", trbuf);
> + if (v == TR_END)
> + break;
> + }
> +}
> +
> +static int handle_response(struct fsi_master_acf *master,
> + uint8_t slave, uint8_t size, void *data)
> +{
> + int busy_count = 0, rc;
> + int crc_err_retries = 0;
> + struct fsi_msg cmd;
> + __be32 response;
> + uint8_t tag;
> +retry:
> + rc = read_copro_response(master, size, &response, &tag);
> +
> + /* Handle retries on CRC errors */
> + if (rc == -EAGAIN) {
> + /* Too many retries ? */
> + if (crc_err_retries++ > FSI_CRC_ERR_RETRIES) {
> + /*
> + * Pass it up as a -EIO otherwise upper level will retry
> + * the whole command which isn't what we want here.
> + */
> + rc = -EIO;
> + goto bail;
> + }
> + trace_fsi_master_acf_crc_rsp_error(master, crc_err_retries);
> + if (master->trace_enabled)
> + dump_trace(master);
> + rc = clock_zeros(master, FSI_MASTER_EPOLL_CLOCKS);
> + if (rc) {
> + dev_warn(master->dev,
> + "Error %d clocking zeros for E_POLL\n", rc);
> + return rc;
> + }
> + build_epoll_command(&cmd, slave);
> + rc = send_request(master, &cmd, size == 0);
> + if (rc) {
> + dev_warn(master->dev, "Error %d sending E_POLL\n", rc);
> + return -EIO;
> + }
> + goto retry;
> + }
> + if (rc)
> + return rc;
> +
> + switch (tag) {
> + case FSI_RESP_ACK:
> + if (size && data) {
> + if (size == 4)
> + *(__be32 *)data = response;
> + else if (size == 2)
> + *(__be16 *)data = response;
> + else
> + *(u8 *)data = response;

Response is a u32, the idea here is to discard the top two or three byes?

> +
> +static int fsi_master_acf_setup(struct fsi_master_acf *master)
> +{
> + int timeout, rc;
> + u32 val;
> +

> +
> + /* Wait for status register to indicate command completion
> + * which signals the initialization is complete
> + */
> + for (timeout = 0; timeout < 10; timeout++) {
> + val = readb(master->sram + CF_STARTED);
> + if (val)
> + break;
> + msleep(1);
> + };

drivers/fsi/fsi-master-ast-cf.c:920:2-3: Unneeded semicolon

> + if (!val) {
> + dev_err(master->dev, "Coprocessor startup timeout !\n");
> + rc = -ENODEV;
> + goto err;
> + }
> +
> + /* Configure echo & send delay */
> + writeb(master->t_send_delay, master->sram + SEND_DLY_REG);
> + writeb(master->t_echo_delay, master->sram + ECHO_DLY_REG);
> +
> + /* Enable SW interrupt to copro if any */
> + if (master->cvic) {
> + rc = copro_enable_sw_irq(master);
> + if (rc)
> + goto err;
> + }
> + return 0;
> + err:
> + /* An error occurred, don't leave the coprocessor running */
> + reset_cf(master);
> +
> + /* Release the GPIOs */
> + release_copro_gpios(master);
> +
> + return rc;
> +}

> +static int fsi_master_acf_gpio_request(void *data)
> +{
> + struct fsi_master_acf *master = data;
> + int timeout;
> + u8 val;
> +
> + /* Note: This doesn't require holding out mutex */
> +
> + /* Write reqest */
> + writeb(ARB_ARM_REQ, master->sram + ARB_REG);
> +
> + /* Read back to avoid ordering issue */
> + (void)readb(master->sram + ARB_REG);
> +
> + /*
> + * There is a race (which does happen at boot time) when we get an
> + * arbitration request as we are either about to or just starting
> + * the coprocessor.
> + *
> + * To handle it, we first check if we are running. If not yet we
> + * check whether the copro is started in the SCU.
> + *
> + * If it's not started, we can basically just assume we have arbitration
> + * and return. Otherwise, we wait normally expecting for the arbitration
> + * to eventually complete.
> + */
> + if (readl(master->sram + CF_STARTED) == 0) {
> + unsigned int reg = 0;
> +
> + regmap_read(master->scu, SCU_COPRO_CTRL, &reg);
> + if (!reg & SCU_COPRO_CLK_EN)

Is this correct? Looks like it might be missing some ( )

> + return 0;
> + }
> +
> + /* Ring doorbell if any */
> + if (master->cvic)
> + writel(0x2, master->cvic + CVIC_TRIG_REG);
> +
> + for (timeout = 0; timeout < 10000; timeout++) {
> + val = readb(master->sram + ARB_REG);
> + if (val != ARB_ARM_REQ)
> + break;
> + udelay(1);
> + }
> +
> + /* If it failed, override anyway */
> + if (val != ARB_ARM_ACK)
> + dev_warn(master->dev, "GPIO request arbitration timeout\n");
> +
> + return 0;
> +}
> +

\
 
 \ /
  Last update: 2018-06-28 07:04    [W:0.156 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site