lkml.org 
[lkml]   [2018]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [linux-sunxi] [PATCH] ARM: dts: sun8i-h3: Increase the GPU clock to 576 MHz
Date
Hi!

Dne sreda, 27. junij 2018 ob 09:26:35 CEST je Paul Kocialkowski napisal(a):
> It was reported (based on declarations from the Allwiner BSP) that the
> Mali 400 found on the H3 can be clocked up to 576 MHz.
>
> The frequency was tested using the r6p2 out-of-tree driver and a Kodi
> userspace with associated r6p2 blobs, leading to a working result.
>
> This increases the clock to 576 MHz, which directly increases the pixel
> throughput of the GPU (given the 1 pixel-per-cycle rate).

I think that current clock speed is on a bit conservative side because there
is no thermal throttling support yet.

Best regards,
Jernej


\
 
 \ /
  Last update: 2018-06-27 18:50    [W:0.053 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site