Messages in this thread | | | Subject | Re: [PATCH v3] ARM: dts: BCM5301X: Add support for Linksys EA9500 | From | Florian Fainelli <> | Date | Tue, 26 Jun 2018 13:30:11 -0700 |
| |
On 06/18/2018 10:41 AM, Vivek Unune wrote: > Hardware Info > ------------- > > Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz > Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125 > DDR3 RAM - 256 MB > Flash - 128 MB (Toshiba TC58BVG0S3HTA00) > 2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC > Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4) > 5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC > Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch > Ports - 8 Ports, 1 WAN Ports > Antennas - 8 Antennas > Serial Port - @J6 [GND,TX,RX] (VCC NC) 115200 8n1 > > Tested with OpenWrt built with DSA driver and Kernel v4.14 > > Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Applied to devicetree/next, thanks Vivek. -- Florian
| |