lkml.org 
[lkml]   [2018]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/3] pinctrl: actions: Add interrupt support for OWL S900 SoC
On Sat, Jun 23, 2018 at 7:59 AM, Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:
> Add interrupt support for Actions Semi OWL S900 SoC.
>

FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> drivers/pinctrl/actions/Kconfig | 1 +
> drivers/pinctrl/actions/pinctrl-owl.c | 271 ++++++++++++++++++++++++-
> drivers/pinctrl/actions/pinctrl-owl.h | 22 +-
> drivers/pinctrl/actions/pinctrl-s900.c | 31 +--
> 4 files changed, 307 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/pinctrl/actions/Kconfig b/drivers/pinctrl/actions/Kconfig
> index 490927b4ea76..2397cb0f6011 100644
> --- a/drivers/pinctrl/actions/Kconfig
> +++ b/drivers/pinctrl/actions/Kconfig
> @@ -5,6 +5,7 @@ config PINCTRL_OWL
> select PINCONF
> select GENERIC_PINCONF
> select GPIOLIB
> + select GPIOLIB_IRQCHIP
> help
> Say Y here to enable Actions Semi OWL pinctrl driver
>
> diff --git a/drivers/pinctrl/actions/pinctrl-owl.c b/drivers/pinctrl/actions/pinctrl-owl.c
> index 76243caa08c6..ce032d71dad5 100644
> --- a/drivers/pinctrl/actions/pinctrl-owl.c
> +++ b/drivers/pinctrl/actions/pinctrl-owl.c
> @@ -13,6 +13,7 @@
> #include <linux/err.h>
> #include <linux/gpio/driver.h>
> #include <linux/io.h>
> +#include <linux/irq.h>
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/platform_device.h>
> @@ -45,6 +46,9 @@ struct owl_pinctrl {
> struct clk *clk;
> const struct owl_pinctrl_soc_data *soc;
> void __iomem *base;
> + struct irq_chip irq_chip;
> + unsigned int num_irq;
> + unsigned int *irq;
> };
>
> static void owl_update_bits(void __iomem *base, u32 mask, u32 val)
> @@ -701,10 +705,213 @@ static int owl_gpio_direction_output(struct gpio_chip *chip,
> return 0;
> }
>
> +static void irq_set_type(struct owl_pinctrl *pctrl, int gpio, unsigned int type)
> +{
> + const struct owl_gpio_port *port;
> + void __iomem *gpio_base;
> + unsigned long flags;
> + unsigned int offset, value, irq_type = 0;
> +
> + switch (type) {
> + case IRQ_TYPE_EDGE_BOTH:
> + /*
> + * Since the hardware doesn't support interrupts on both edges,
> + * emulate it in the software by setting the single edge
> + * interrupt and switching to the opposite edge while ACKing
> + * the interrupt
> + */
> + if (owl_gpio_get(&pctrl->chip, gpio))
> + irq_type = OWL_GPIO_INT_EDGE_FALLING;
> + else
> + irq_type = OWL_GPIO_INT_EDGE_RISING;
> + break;
> +
> + case IRQ_TYPE_EDGE_RISING:
> + irq_type = OWL_GPIO_INT_EDGE_RISING;
> + break;
> +
> + case IRQ_TYPE_EDGE_FALLING:
> + irq_type = OWL_GPIO_INT_EDGE_FALLING;
> + break;
> +
> + case IRQ_TYPE_LEVEL_HIGH:
> + irq_type = OWL_GPIO_INT_LEVEL_HIGH;
> + break;
> +
> + case IRQ_TYPE_LEVEL_LOW:
> + irq_type = OWL_GPIO_INT_LEVEL_LOW;
> + break;
> +
> + default:
> + break;
> + }
> +
> + port = owl_gpio_get_port(pctrl, &gpio);
> + if (WARN_ON(port == NULL))
> + return;
> +
> + gpio_base = pctrl->base + port->offset;
> +
> + raw_spin_lock_irqsave(&pctrl->lock, flags);
> +
> + offset = (gpio < 16) ? 4 : 0;
> + value = readl_relaxed(gpio_base + port->intc_type + offset);
> + value &= ~(OWL_GPIO_INT_MASK << ((gpio % 16) * 2));
> + value |= irq_type << ((gpio % 16) * 2);
> + writel_relaxed(value, gpio_base + port->intc_type + offset);
> +
> + raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> +}
> +
> +static void owl_gpio_irq_mask(struct irq_data *data)
> +{
> + struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
> + struct owl_pinctrl *pctrl = gpiochip_get_data(gc);
> + const struct owl_gpio_port *port;
> + void __iomem *gpio_base;
> + unsigned long flags;
> + unsigned int gpio = data->hwirq;
> + u32 val;
> +
> + port = owl_gpio_get_port(pctrl, &gpio);
> + if (WARN_ON(port == NULL))
> + return;
> +
> + gpio_base = pctrl->base + port->offset;
> +
> + raw_spin_lock_irqsave(&pctrl->lock, flags);
> +
> + owl_gpio_update_reg(gpio_base + port->intc_msk, gpio, false);
> +
> + /* disable port interrupt if no interrupt pending bit is active */
> + val = readl_relaxed(gpio_base + port->intc_msk);
> + if (val == 0)
> + owl_gpio_update_reg(gpio_base + port->intc_ctl,
> + OWL_GPIO_CTLR_ENABLE, false);
> +
> + raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> +}
> +
> +static void owl_gpio_irq_unmask(struct irq_data *data)
> +{
> + struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
> + struct owl_pinctrl *pctrl = gpiochip_get_data(gc);
> + const struct owl_gpio_port *port;
> + void __iomem *gpio_base;
> + unsigned long flags;
> + unsigned int gpio = data->hwirq;
> + u32 value;
> +
> + port = owl_gpio_get_port(pctrl, &gpio);
> + if (WARN_ON(port == NULL))
> + return;
> +
> + gpio_base = pctrl->base + port->offset;
> + raw_spin_lock_irqsave(&pctrl->lock, flags);
> +
> + /* enable port interrupt */
> + value = readl_relaxed(gpio_base + port->intc_ctl);
> + value |= BIT(OWL_GPIO_CTLR_ENABLE) | BIT(OWL_GPIO_CTLR_SAMPLE_CLK_24M);
> + writel_relaxed(value, gpio_base + port->intc_ctl);
> +
> + /* enable GPIO interrupt */
> + owl_gpio_update_reg(gpio_base + port->intc_msk, gpio, true);
> +
> + raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> +}
> +
> +static void owl_gpio_irq_ack(struct irq_data *data)
> +{
> + struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
> + struct owl_pinctrl *pctrl = gpiochip_get_data(gc);
> + const struct owl_gpio_port *port;
> + void __iomem *gpio_base;
> + unsigned long flags;
> + unsigned int gpio = data->hwirq;
> +
> + /*
> + * Switch the interrupt edge to the opposite edge of the interrupt
> + * which got triggered for the case of emulating both edges
> + */
> + if (irqd_get_trigger_type(data) == IRQ_TYPE_EDGE_BOTH) {
> + if (owl_gpio_get(gc, gpio))
> + irq_set_type(pctrl, gpio, IRQ_TYPE_EDGE_FALLING);
> + else
> + irq_set_type(pctrl, gpio, IRQ_TYPE_EDGE_RISING);
> + }
> +
> + port = owl_gpio_get_port(pctrl, &gpio);
> + if (WARN_ON(port == NULL))
> + return;
> +
> + gpio_base = pctrl->base + port->offset;
> +
> + raw_spin_lock_irqsave(&pctrl->lock, flags);
> +
> + owl_gpio_update_reg(gpio_base + port->intc_ctl,
> + OWL_GPIO_CTLR_PENDING, true);
> +
> + raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> +}
> +
> +static int owl_gpio_irq_set_type(struct irq_data *data, unsigned int type)
> +{
> + struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
> + struct owl_pinctrl *pctrl = gpiochip_get_data(gc);
> +
> + if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
> + irq_set_handler_locked(data, handle_level_irq);
> + else
> + irq_set_handler_locked(data, handle_edge_irq);
> +
> + irq_set_type(pctrl, data->hwirq, type);
> +
> + return 0;
> +}
> +
> +static void owl_gpio_irq_handler(struct irq_desc *desc)
> +{
> + struct owl_pinctrl *pctrl = irq_desc_get_handler_data(desc);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + struct irq_domain *domain = pctrl->chip.irq.domain;
> + unsigned int parent = irq_desc_get_irq(desc);
> + const struct owl_gpio_port *port;
> + void __iomem *base;
> + unsigned int pin, irq, offset = 0, i;
> + unsigned long pending_irq;
> +
> + chained_irq_enter(chip, desc);
> +
> + for (i = 0; i < pctrl->soc->nports; i++) {
> + port = &pctrl->soc->ports[i];
> + base = pctrl->base + port->offset;
> +
> + /* skip ports that are not associated with this irq */
> + if (parent != pctrl->irq[i])
> + goto skip;
> +
> + pending_irq = readl_relaxed(base + port->intc_pd);
> +
> + for_each_set_bit(pin, &pending_irq, port->pins) {
> + irq = irq_find_mapping(domain, offset + pin);
> + generic_handle_irq(irq);
> +
> + /* clear pending interrupt */
> + owl_gpio_update_reg(base + port->intc_pd, pin, true);
> + }
> +
> +skip:
> + offset += port->pins;
> + }
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> static int owl_gpio_init(struct owl_pinctrl *pctrl)
> {
> struct gpio_chip *chip;
> - int ret;
> + struct gpio_irq_chip *gpio_irq;
> + int ret, i, j, offset;
>
> chip = &pctrl->chip;
> chip->base = -1;
> @@ -714,6 +921,35 @@ static int owl_gpio_init(struct owl_pinctrl *pctrl)
> chip->owner = THIS_MODULE;
> chip->of_node = pctrl->dev->of_node;
>
> + pctrl->irq_chip.name = chip->of_node->name;
> + pctrl->irq_chip.irq_ack = owl_gpio_irq_ack;
> + pctrl->irq_chip.irq_mask = owl_gpio_irq_mask;
> + pctrl->irq_chip.irq_unmask = owl_gpio_irq_unmask;
> + pctrl->irq_chip.irq_set_type = owl_gpio_irq_set_type;
> +
> + gpio_irq = &chip->irq;
> + gpio_irq->chip = &pctrl->irq_chip;
> + gpio_irq->handler = handle_simple_irq;
> + gpio_irq->default_type = IRQ_TYPE_NONE;
> + gpio_irq->parent_handler = owl_gpio_irq_handler;
> + gpio_irq->parent_handler_data = pctrl;
> + gpio_irq->num_parents = pctrl->num_irq;
> + gpio_irq->parents = pctrl->irq;
> +
> + gpio_irq->map = devm_kcalloc(pctrl->dev, chip->ngpio,
> + sizeof(*gpio_irq->map), GFP_KERNEL);
> + if (!gpio_irq->map)
> + return -ENOMEM;
> +
> + for (i = 0, offset = 0; i < pctrl->soc->nports; i++) {
> + const struct owl_gpio_port *port = &pctrl->soc->ports[i];
> +
> + for (j = 0; j < port->pins; j++)
> + gpio_irq->map[offset + j] = gpio_irq->parents[i];
> +
> + offset += port->pins;
> + }
> +
> ret = gpiochip_add_data(&pctrl->chip, pctrl);
> if (ret) {
> dev_err(pctrl->dev, "failed to register gpiochip\n");
> @@ -728,7 +964,7 @@ int owl_pinctrl_probe(struct platform_device *pdev,
> {
> struct resource *res;
> struct owl_pinctrl *pctrl;
> - int ret;
> + int ret, i;
>
> pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
> if (!pctrl)
> @@ -772,14 +1008,41 @@ int owl_pinctrl_probe(struct platform_device *pdev,
> &owl_pinctrl_desc, pctrl);
> if (IS_ERR(pctrl->pctrldev)) {
> dev_err(&pdev->dev, "could not register Actions OWL pinmux driver\n");
> - return PTR_ERR(pctrl->pctrldev);
> + ret = PTR_ERR(pctrl->pctrldev);
> + goto err_exit;
> + }
> +
> + ret = platform_irq_count(pdev);
> + if (ret < 0)
> + goto err_exit;
> +
> + pctrl->num_irq = ret;
> +
> + pctrl->irq = devm_kcalloc(&pdev->dev, pctrl->num_irq,
> + sizeof(*pctrl->irq), GFP_KERNEL);
> + if (!pctrl->irq) {
> + ret = -ENOMEM;
> + goto err_exit;
> + }
> +
> + for (i = 0; i < pctrl->num_irq ; i++) {
> + pctrl->irq[i] = platform_get_irq(pdev, i);
> + if (pctrl->irq[i] < 0) {
> + ret = pctrl->irq[i];
> + goto err_exit;
> + }
> }
>
> ret = owl_gpio_init(pctrl);
> if (ret)
> - return ret;
> + goto err_exit;
>
> platform_set_drvdata(pdev, pctrl);
>
> return 0;
> +
> +err_exit:
> + clk_disable_unprepare(pctrl->clk);
> +
> + return ret;
> }
> diff --git a/drivers/pinctrl/actions/pinctrl-owl.h b/drivers/pinctrl/actions/pinctrl-owl.h
> index 74342378937c..a724d1d406d4 100644
> --- a/drivers/pinctrl/actions/pinctrl-owl.h
> +++ b/drivers/pinctrl/actions/pinctrl-owl.h
> @@ -29,6 +29,18 @@ enum owl_pinconf_drv {
> OWL_PINCONF_DRV_12MA,
> };
>
> +/* GPIO CTRL Bit Definition */
> +#define OWL_GPIO_CTLR_PENDING 0
> +#define OWL_GPIO_CTLR_ENABLE 1
> +#define OWL_GPIO_CTLR_SAMPLE_CLK_24M 2
> +
> +/* GPIO TYPE Bit Definition */
> +#define OWL_GPIO_INT_LEVEL_HIGH 0
> +#define OWL_GPIO_INT_LEVEL_LOW 1
> +#define OWL_GPIO_INT_EDGE_RISING 2
> +#define OWL_GPIO_INT_EDGE_FALLING 3
> +#define OWL_GPIO_INT_MASK 3
> +
> /**
> * struct owl_pullctl - Actions pad pull control register
> * @reg: offset to the pull control register
> @@ -121,6 +133,10 @@ struct owl_pinmux_func {
> * @outen: offset of the output enable register.
> * @inen: offset of the input enable register.
> * @dat: offset of the data register.
> + * @intc_ctl: offset of the interrupt control register.
> + * @intc_pd: offset of the interrupt pending register.
> + * @intc_msk: offset of the interrupt mask register.
> + * @intc_type: offset of the interrupt type register.
> */
> struct owl_gpio_port {
> unsigned int offset;
> @@ -128,6 +144,10 @@ struct owl_gpio_port {
> unsigned int outen;
> unsigned int inen;
> unsigned int dat;
> + unsigned int intc_ctl;
> + unsigned int intc_pd;
> + unsigned int intc_msk;
> + unsigned int intc_type;
> };
>
> /**
> @@ -140,7 +160,7 @@ struct owl_gpio_port {
> * @ngroups: number of entries in @groups.
> * @padinfo: array describing the pad info of this SoC.
> * @ngpios: number of pingroups the driver should expose as GPIOs.
> - * @port: array describing all GPIO ports of this SoC.
> + * @ports: array describing all GPIO ports of this SoC.
> * @nports: number of GPIO ports in this SoC.
> */
> struct owl_pinctrl_soc_data {
> diff --git a/drivers/pinctrl/actions/pinctrl-s900.c b/drivers/pinctrl/actions/pinctrl-s900.c
> index 5503c7945764..ea67b14ef93b 100644
> --- a/drivers/pinctrl/actions/pinctrl-s900.c
> +++ b/drivers/pinctrl/actions/pinctrl-s900.c
> @@ -1821,22 +1821,27 @@ static struct owl_padinfo s900_padinfo[NUM_PADS] = {
> [SGPIO3] = PAD_INFO_PULLCTL_ST(SGPIO3)
> };
>
> -#define OWL_GPIO_PORT(port, base, count, _outen, _inen, _dat) \
> - [OWL_GPIO_PORT_##port] = { \
> - .offset = base, \
> - .pins = count, \
> - .outen = _outen, \
> - .inen = _inen, \
> - .dat = _dat, \
> +#define OWL_GPIO_PORT(port, base, count, _outen, _inen, _dat, \
> + _intc_ctl, _intc_pd, _intc_msk, _intc_type) \
> + [OWL_GPIO_PORT_##port] = { \
> + .offset = base, \
> + .pins = count, \
> + .outen = _outen, \
> + .inen = _inen, \
> + .dat = _dat, \
> + .intc_ctl = _intc_ctl, \
> + .intc_pd = _intc_pd, \
> + .intc_msk = _intc_msk, \
> + .intc_type = _intc_type, \
> }
>
> static const struct owl_gpio_port s900_gpio_ports[] = {
> - OWL_GPIO_PORT(A, 0x0000, 32, 0x0, 0x4, 0x8),
> - OWL_GPIO_PORT(B, 0x000C, 32, 0x0, 0x4, 0x8),
> - OWL_GPIO_PORT(C, 0x0018, 12, 0x0, 0x4, 0x8),
> - OWL_GPIO_PORT(D, 0x0024, 30, 0x0, 0x4, 0x8),
> - OWL_GPIO_PORT(E, 0x0030, 32, 0x0, 0x4, 0x8),
> - OWL_GPIO_PORT(F, 0x00F0, 8, 0x0, 0x4, 0x8)
> + OWL_GPIO_PORT(A, 0x0000, 32, 0x0, 0x4, 0x8, 0x204, 0x208, 0x20C, 0x240),
> + OWL_GPIO_PORT(B, 0x000C, 32, 0x0, 0x4, 0x8, 0x534, 0x204, 0x208, 0x23C),
> + OWL_GPIO_PORT(C, 0x0018, 12, 0x0, 0x4, 0x8, 0x52C, 0x200, 0x204, 0x238),
> + OWL_GPIO_PORT(D, 0x0024, 30, 0x0, 0x4, 0x8, 0x524, 0x1FC, 0x200, 0x234),
> + OWL_GPIO_PORT(E, 0x0030, 32, 0x0, 0x4, 0x8, 0x51C, 0x1F8, 0x1FC, 0x230),
> + OWL_GPIO_PORT(F, 0x00F0, 8, 0x0, 0x4, 0x8, 0x460, 0x140, 0x144, 0x178)
> };
>
> static struct owl_pinctrl_soc_data s900_pinctrl_data = {
> --
> 2.17.1
>



--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2018-06-25 11:45    [W:0.984 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site