lkml.org 
[lkml]   [2018]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] KVM: x86: hyperv: implement PV IPI send hypercalls
2018-06-22 16:56+0200, Vitaly Kuznetsov:
> Using hypercall for sending IPIs is faster because this allows to specify
> any number of vCPUs (even > 64 with sparse CPU set), the whole procedure
> will take only one VMEXIT.
>
> Current Hyper-V TLFS (v5.0b) claims that HvCallSendSyntheticClusterIpi
> hypercall can't be 'fast' (passing parameters through registers) but
> apparently this is not true, Windows always uses it as 'fast' so we need
> to support that.
>
> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
> ---
> diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
> @@ -1357,6 +1357,108 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *current_vcpu, u64 ingpa,
> ((u64)rep_cnt << HV_HYPERCALL_REP_COMP_OFFSET);
> }
>
> +static u64 kvm_hv_send_ipi(struct kvm_vcpu *current_vcpu, u64 ingpa, u64 outgpa,
> + bool ex, bool fast)
> +{
> + struct kvm *kvm = current_vcpu->kvm;
> + struct hv_send_ipi_ex send_ipi_ex;
> + struct hv_send_ipi send_ipi;
> + struct kvm_vcpu *vcpu;
> + unsigned long valid_bank_mask = 0;
> + u64 sparse_banks[64];
> + int sparse_banks_len, i;
> + struct kvm_lapic_irq irq = {0};
> + bool all_cpus;
> +
> + if (!ex) {
> + if (!fast) {
> + if (unlikely(kvm_read_guest(kvm, ingpa, &send_ipi,
> + sizeof(send_ipi))))
> + return HV_STATUS_INVALID_HYPERCALL_INPUT;
> + sparse_banks[0] = send_ipi.cpu_mask;
> + irq.vector = send_ipi.vector;
> + } else {
> + /* 'reserved' part of hv_send_ipi should be 0 */
> + if (unlikely(ingpa >> 32 != 0))
> + return HV_STATUS_INVALID_HYPERCALL_INPUT;
> + sparse_banks[0] = outgpa;
> + irq.vector = (u32)ingpa;
> + }
> + all_cpus = false;
> +
> + trace_kvm_hv_send_ipi(irq.vector, sparse_banks[0]);
> + } else {
> + if (unlikely(kvm_read_guest(kvm, ingpa, &send_ipi_ex,
> + sizeof(send_ipi_ex))))
> + return HV_STATUS_INVALID_HYPERCALL_INPUT;
> +
> + trace_kvm_hv_send_ipi_ex(send_ipi_ex.vector,
> + send_ipi_ex.vp_set.format,
> + send_ipi_ex.vp_set.valid_bank_mask);
> +
> + irq.vector = send_ipi_ex.vector;
> + valid_bank_mask = send_ipi_ex.vp_set.valid_bank_mask;
> + sparse_banks_len = bitmap_weight(&valid_bank_mask, 64) *
> + sizeof(sparse_banks[0]);
> + all_cpus = send_ipi_ex.vp_set.format !=
> + HV_GENERIC_SET_SPARSE_4K;

This would be much better readable as

send_ipi_ex.vp_set.format == HV_GENERIC_SET_ALL

And if Microsoft ever adds more formats, they won't be all VCPUs, so
we're future-proofing as well.

> +
> + if (!sparse_banks_len)
> + goto ret_success;
> +
> + if (!all_cpus &&
> + kvm_read_guest(kvm,
> + ingpa + offsetof(struct hv_send_ipi_ex,
> + vp_set.bank_contents),
> + sparse_banks,
> + sparse_banks_len))
> + return HV_STATUS_INVALID_HYPERCALL_INPUT;
> + }
> +
> + if ((irq.vector < HV_IPI_LOW_VECTOR) ||
> + (irq.vector > HV_IPI_HIGH_VECTOR))
> + return HV_STATUS_INVALID_HYPERCALL_INPUT;
> +
> + irq.delivery_mode = APIC_DM_FIXED;

I'd set this during variable definition.

APIC_DM_FIXED is 0 anyway and the compiler probably won't optimize it
here due to function with side effects since definition.

> +
> + kvm_for_each_vcpu(i, vcpu, kvm) {
> + struct kvm_vcpu_hv *hv = &vcpu->arch.hyperv;
> + int bank = hv->vp_index / 64, sbank = 0;
> +
> + if (!all_cpus) {
> + /* Banks >64 can't be represented */
> + if (bank >= 64)
> + continue;
> +
> + /* Non-ex hypercalls can only address first 64 vCPUs */
> + if (!ex && bank)
> + continue;
> +
> + if (ex) {
> + /*
> + * Check is the bank of this vCPU is in sparse
> + * set and get the sparse bank number.
> + */
> + sbank = get_sparse_bank_no(valid_bank_mask,
> + bank);
> +
> + if (sbank < 0)
> + continue;
> + }
> +
> + if (!(sparse_banks[sbank] & BIT_ULL(hv->vp_index % 64)))
> + continue;
> + }
> +
> + /* We fail only when APIC is disabled */
> + if (!kvm_apic_set_irq(vcpu, &irq, NULL))
> + return HV_STATUS_INVALID_HYPERCALL_INPUT;

Does Windows use this even for 1 VCPU IPI?

I'm thinking we could apply the same optimization we do for LAPIC -- RCU
protected array that maps vp_index to vcpu.

Thanks.

> + }
> +
> +ret_success:
> + return HV_STATUS_SUCCESS;
> +}
> +
> bool kvm_hv_hypercall_enabled(struct kvm *kvm)
> {
> return READ_ONCE(kvm->arch.hyperv.hv_hypercall) & HV_X64_MSR_HYPERCALL_ENABLE;
> @@ -1526,6 +1628,20 @@ int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
> }
> ret = kvm_hv_flush_tlb(vcpu, ingpa, rep_cnt, true);
> break;
> + case HVCALL_SEND_IPI:
> + if (unlikely(rep)) {
> + ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
> + break;
> + }
> + ret = kvm_hv_send_ipi(vcpu, ingpa, outgpa, false, fast);
> + break;
> + case HVCALL_SEND_IPI_EX:
> + if (unlikely(fast || rep)) {

Now I'm getting worried that the ex can be fast as well and we'll be
reading the banks from XMM registers. :)

\
 
 \ /
  Last update: 2018-06-22 21:14    [W:0.138 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site