lkml.org 
[lkml]   [2018]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 09/10] Input: ams_delta_serio: use IRQ resource
Date
The driver still obtains IRQ number from a hardcoded GPIO.  Use IRQ
resource instead.

For this to work on Amstrad Delta, add the IRQ resource to
ams-delta-serio platform device structure. Obtain the IRQ number
assigned to "keybrd_clk" GPIO pin from FIQ initialization routine.

As a benefit, the driver no longer needs to include
<mach/board-ams-delta.h>.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
---
Changelog:
v2: - obsolete assignment of handle_simple_irq() removed from the driver
and replaced with a comment in the FIQ init file,
- rebased on v4.18-rc1, no conflicts.

arch/arm/mach-omap1/ams-delta-fiq.c | 20 +++++++++++++++++++-
arch/arm/mach-omap1/ams-delta-fiq.h | 3 ++-
arch/arm/mach-omap1/board-ams-delta.c | 17 ++++++++++++++++-
drivers/input/serio/ams_delta_serio.c | 32 +++++++++-----------------------
4 files changed, 46 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index e72935034d42..82ca4246a5e4 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -20,6 +20,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/platform_data/ams-delta-fiq.h>
+#include <linux/platform_device.h>

#include <mach/board-ams-delta.h>

@@ -84,7 +85,8 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
return IRQ_HANDLED;
}

-void __init ams_delta_init_fiq(struct gpio_chip *chip)
+void __init ams_delta_init_fiq(struct gpio_chip *chip,
+ struct platform_device *serio)
{
struct gpio_desc *gpiod, *data = NULL, *clk = NULL;
void *fiqhandler_start;
@@ -201,6 +203,22 @@ void __init ams_delta_init_fiq(struct gpio_chip *chip)
val = omap_readl(OMAP_IH1_BASE + offset) | 1;
omap_writel(val, OMAP_IH1_BASE + offset);

+ /* Initialize serio device IRQ resource */
+ serio->resource[0].start = gpiod_to_irq(clk);
+ serio->resource[0].end = serio->resource[0].start;
+
+ /*
+ * Since FIQ handler performs handling of GPIO registers for
+ * "keybrd_clk" IRQ pin, ams_delta_serio driver used to set
+ * handle_simple_irq() as active IRQ handler for that pin to avoid
+ * bad interaction with gpio-omap driver. This is no longer needed
+ * as handle_simple_irq() is now the default handler for OMAP GPIO
+ * edge interrupts.
+ * This comment replaces the obsolete code which has been removed
+ * from the ams_delta_serio driver and stands here only as a reminder
+ * of that dependency on gpio-omap driver behavior.
+ */
+
return;

out_gpio:
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.h b/arch/arm/mach-omap1/ams-delta-fiq.h
index 3f691d68aa62..fd76df3cce37 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/ams-delta-fiq.h
@@ -35,7 +35,8 @@
#ifndef __ASSEMBLER__
extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end;

-extern void __init ams_delta_init_fiq(struct gpio_chip *chip);
+extern void __init ams_delta_init_fiq(struct gpio_chip *chip,
+ struct platform_device *pdev);
#endif

#endif
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index fe9a3e7cbfeb..84177ba3e39a 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -504,9 +504,24 @@ static struct platform_device cx20442_codec_device = {
.id = -1,
};

+static struct resource ams_delta_serio_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ /*
+ * Initialize IRQ resource with invalid IRQ number.
+ * It will be replaced with dynamically allocated GPIO IRQ
+ * obtained from GPIO chip as soon as the chip is available.
+ */
+ .start = -EINVAL,
+ .end = -EINVAL,
+ },
+};
+
static struct platform_device ams_delta_serio_device = {
.name = "ams-delta-serio",
.id = PLATFORM_DEVID_NONE,
+ .num_resources = ARRAY_SIZE(ams_delta_serio_resources),
+ .resource = ams_delta_serio_resources,
};

static struct regulator_consumer_supply keybrd_pwr_consumers[] = {
@@ -615,7 +630,7 @@ static void __init omap_gpio_deps_init(void)
return;
}

- ams_delta_init_fiq(chip);
+ ams_delta_init_fiq(chip, &ams_delta_serio_device);
}

static void __init ams_delta_init(void)
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index 2602f7cff5ae..c1f8226f172e 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -20,7 +20,6 @@
* However, when used with the E3 mailboard that producecs non-standard
* scancodes, a custom key table must be prepared and loaded from userspace.
*/
-#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/platform_data/ams-delta-fiq.h>
#include <linux/platform_device.h>
@@ -29,8 +28,6 @@
#include <linux/slab.h>
#include <linux/module.h>

-#include <mach/board-ams-delta.h>
-
#define DRIVER_NAME "ams-delta-serio"

MODULE_AUTHOR("Matt Callow");
@@ -113,7 +110,7 @@ static int ams_delta_serio_init(struct platform_device *pdev)
{
struct ams_delta_serio *priv;
struct serio *serio;
- int err;
+ int irq, err;

priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -139,26 +136,20 @@ static int ams_delta_serio_init(struct platform_device *pdev)
return err;
}

- err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
- ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING,
- DRIVER_NAME, priv);
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -ENXIO;
+
+ err = devm_request_irq(&pdev->dev, irq, ams_delta_serio_interrupt,
+ IRQ_TYPE_EDGE_RISING, DRIVER_NAME, priv);
if (err < 0) {
dev_err(&pdev->dev, "IRQ request failed (%d)\n", err);
return err;
}
- /*
- * Since GPIO register handling for keyboard clock pin is performed
- * at FIQ level, switch back from edge to simple interrupt handler
- * to avoid bad interaction.
- */
- irq_set_handler(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
- handle_simple_irq);

serio = kzalloc(sizeof(*serio), GFP_KERNEL);
- if (!serio) {
- err = -ENOMEM;
- goto irq;
- }
+ if (!serio)
+ return -ENOMEM;

priv->serio = serio;

@@ -177,10 +168,6 @@ static int ams_delta_serio_init(struct platform_device *pdev)
dev_info(&serio->dev, "%s\n", serio->name);

return 0;
-
-irq:
- free_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), priv);
- return err;
}

static int ams_delta_serio_exit(struct platform_device *pdev)
@@ -188,7 +175,6 @@ static int ams_delta_serio_exit(struct platform_device *pdev)
struct ams_delta_serio *priv = platform_get_drvdata(pdev);

serio_unregister_port(priv->serio);
- free_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);

return 0;
}
--
2.16.4
\
 
 \ /
  Last update: 2018-06-22 00:44    [W:0.205 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site