lkml.org 
[lkml]   [2018]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC 2/2] rcu: Remove ->dynticks_nmi_nesting from struct rcu_dynticks
On Wed, Jun 20, 2018 at 10:40:37AM -0700, Paul E. McKenney wrote:
> On Thu, Jun 21, 2018 at 02:15:07AM +0900, Byungchul Park wrote:

[...]

> > Totally agree with you. Sorry bothering you.
>
> Absolutely not a problem, absolutely no need to apologize! I am
> actually very happy that you are taking RCU seriously and looking at it
> in such depth.

Thanks a lot. :)

> My problem is that when I see a patch like this, something in the back of
> my head screams "WRONG!!!", and I sometimes get confused about exactly
> what the back of my head is screaming about, which was the case here.
> Hence my misguided initial complaint about NMI nesting instead of about
> the possibility of unpaired rcu_irq_enter() calls.
>
> So apologies for that, but I unfortunately cannot promise that this

It's ok. I also made a mistake.

> won't happen again. I have learned the hard way to trust the back of
> my head. It sometimes makes mistakes, but less often than the rest of
> my head does. ;-)

I believe it doesn't matter at all as everybody makes mistakes. You must
be much more careful in everything than others though. I believe the
only problem with regard to human's mistakes is the attitude never even
trying to communicate with others, being convinced that they've never
made mistakes.

> In the meantime, is it possible to rearrange rcu_irq_enter() and
> rcu_nmi_enter() (and similarly rcu_irq_exit() and rcu_nmi_exit())
> to avoid the conditionals (via compiler inlining) while still keeping
> function calls ordered properly? I bet that you could do it by splitting
> rcu_nmi_enter() and rcu_nmi_exit() sort of like this:
>
> static void rcu_nmi_enter_common(bool irq)
> {
> /*
> * You fill this in. Maybe __always_inline above. The
> * rcu_dynticks_task_exit() and rcu_cleanup_after_idle()
> * calls need to be on opposite sides of the
> * rcu_dynticks_eqs_exit() call, just like they are now.
> */
> }
>
> void rcu_nmi_enter(void)
> {
> rcu_nmi_enter_common(false);
> }
>
> void rcu_irq_enter(void)
> {
> lockdep_assert_irqs_disabled();
> rcu_nmi_enter(true);
> }
>
> Saving a couple of branches on the irq enter/exit paths seems like it
> just might be worth something. ;-)

What about the following patch?

I applied what you suggested and re-named rcu_nmi_{enter,exit} to
rcu_irq_{enter,exit} and applied the same re-naming to
->dynticks_nmi_nesting as well, since those are not things to do with
nmi anymore but both irq and nmi.

I think "irq" is better to represent both irq and nmi than "nmi".
Please let me know if you don't think so. I can get rid of the re-
naming from the patch.

I will re-send this with a change log after getting your opinion.

----->8-----
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index deb2508..413fef7 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -260,7 +260,7 @@ void rcu_bh_qs(void)

static DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
.dynticks_nesting = 1,
- .dynticks_nmi_nesting = DYNTICK_IRQ_NONIDLE,
+ .dynticks_irq_nesting = DYNTICK_IRQ_NONIDLE,
.dynticks = ATOMIC_INIT(RCU_DYNTICK_CTRL_CTR),
};

@@ -695,7 +695,7 @@ static struct rcu_node *rcu_get_root(struct rcu_state *rsp)
* Enter an RCU extended quiescent state, which can be either the
* idle loop or adaptive-tickless usermode execution.
*
- * We crowbar the ->dynticks_nmi_nesting field to zero to allow for
+ * We crowbar the ->dynticks_irq_nesting field to zero to allow for
* the possibility of usermode upcalls having messed up our count
* of interrupt nesting level during the prior busy period.
*/
@@ -706,7 +706,7 @@ static void rcu_eqs_enter(bool user)
struct rcu_dynticks *rdtp;

rdtp = this_cpu_ptr(&rcu_dynticks);
- WRITE_ONCE(rdtp->dynticks_nmi_nesting, 0);
+ WRITE_ONCE(rdtp->dynticks_irq_nesting, 0);
WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) &&
rdtp->dynticks_nesting == 0);
if (rdtp->dynticks_nesting != 1) {
@@ -764,43 +764,58 @@ void rcu_user_enter(void)
#endif /* CONFIG_NO_HZ_FULL */

/**
- * rcu_nmi_exit - inform RCU of exit from NMI context
+ * rcu_irq_exit_common - inform RCU of exit from interrupt context
*
- * If we are returning from the outermost NMI handler that interrupted an
- * RCU-idle period, update rdtp->dynticks and rdtp->dynticks_nmi_nesting
- * to let the RCU grace-period handling know that the CPU is back to
- * being RCU-idle.
+ * If we are returning from the outermost interrupt handler that
+ * interrupted an RCU-idle period, update rdtp->dynticks and
+ * rdtp->dynticks_irq_nesting to let the RCU grace-period handling
+ * know that the CPU is back to being RCU-idle.
*
- * If you add or remove a call to rcu_nmi_exit(), be sure to test
- * with CONFIG_RCU_EQS_DEBUG=y.
+ * If you add or remove a call to rcu_irq_exit_common(), be sure to
+ * test with CONFIG_RCU_EQS_DEBUG=y.
*/
-void rcu_nmi_exit(void)
+static __always_inline void rcu_irq_exit_common(bool nmi)
{
struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);

/*
- * Check for ->dynticks_nmi_nesting underflow and bad ->dynticks.
+ * Check for ->dynticks_irq_nesting underflow and bad ->dynticks.
* (We are exiting an NMI handler, so RCU better be paying attention
* to us!)
*/
- WARN_ON_ONCE(rdtp->dynticks_nmi_nesting <= 0);
+ WARN_ON_ONCE(rdtp->dynticks_irq_nesting <= 0);
WARN_ON_ONCE(rcu_dynticks_curr_cpu_in_eqs());

/*
* If the nesting level is not 1, the CPU wasn't RCU-idle, so
* leave it in non-RCU-idle state.
*/
- if (rdtp->dynticks_nmi_nesting != 1) {
- trace_rcu_dyntick(TPS("--="), rdtp->dynticks_nmi_nesting, rdtp->dynticks_nmi_nesting - 2, rdtp->dynticks);
- WRITE_ONCE(rdtp->dynticks_nmi_nesting, /* No store tearing. */
- rdtp->dynticks_nmi_nesting - 2);
+ if (rdtp->dynticks_irq_nesting != 1) {
+ trace_rcu_dyntick(TPS("--="), rdtp->dynticks_irq_nesting, rdtp->dynticks_irq_nesting - 2, rdtp->dynticks);
+ WRITE_ONCE(rdtp->dynticks_irq_nesting, /* No store tearing. */
+ rdtp->dynticks_irq_nesting - 2);
return;
}

/* This NMI interrupted an RCU-idle CPU, restore RCU-idleness. */
- trace_rcu_dyntick(TPS("Startirq"), rdtp->dynticks_nmi_nesting, 0, rdtp->dynticks);
- WRITE_ONCE(rdtp->dynticks_nmi_nesting, 0); /* Avoid store tearing. */
+ trace_rcu_dyntick(TPS("Startirq"), rdtp->dynticks_irq_nesting, 0, rdtp->dynticks);
+ WRITE_ONCE(rdtp->dynticks_irq_nesting, 0); /* Avoid store tearing. */
+
+ if (!nmi)
+ rcu_prepare_for_idle();
+
rcu_dynticks_eqs_enter();
+
+ if (!nmi)
+ rcu_dynticks_task_enter();
+}
+
+/**
+ * rcu_nmi_exit - inform RCU of exit from NMI context
+ */
+void rcu_nmi_exit(void)
+{
+ rcu_irq_exit_common(true);
}

/**
@@ -824,14 +839,8 @@ void rcu_nmi_exit(void)
*/
void rcu_irq_exit(void)
{
- struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
-
lockdep_assert_irqs_disabled();
- if (rdtp->dynticks_nmi_nesting == 1)
- rcu_prepare_for_idle();
- rcu_nmi_exit();
- if (rdtp->dynticks_nmi_nesting == 0)
- rcu_dynticks_task_enter();
+ rcu_irq_exit_common(false);
}

/*
@@ -853,7 +862,7 @@ void rcu_irq_exit_irqson(void)
* Exit an RCU extended quiescent state, which can be either the
* idle loop or adaptive-tickless usermode execution.
*
- * We crowbar the ->dynticks_nmi_nesting field to DYNTICK_IRQ_NONIDLE to
+ * We crowbar the ->dynticks_irq_nesting field to DYNTICK_IRQ_NONIDLE to
* allow for the possibility of usermode upcalls messing up our count of
* interrupt nesting level during the busy period that is just now starting.
*/
@@ -876,7 +885,7 @@ static void rcu_eqs_exit(bool user)
trace_rcu_dyntick(TPS("End"), rdtp->dynticks_nesting, 1, rdtp->dynticks);
WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !user && !is_idle_task(current));
WRITE_ONCE(rdtp->dynticks_nesting, 1);
- WRITE_ONCE(rdtp->dynticks_nmi_nesting, DYNTICK_IRQ_NONIDLE);
+ WRITE_ONCE(rdtp->dynticks_irq_nesting, DYNTICK_IRQ_NONIDLE);
}

/**
@@ -914,46 +923,62 @@ void rcu_user_exit(void)
#endif /* CONFIG_NO_HZ_FULL */

/**
- * rcu_nmi_enter - inform RCU of entry to NMI context
+ * rcu_irq_enter_common - inform RCU of entry to interrupt context
*
* If the CPU was idle from RCU's viewpoint, update rdtp->dynticks and
- * rdtp->dynticks_nmi_nesting to let the RCU grace-period handling know
- * that the CPU is active. This implementation permits nested NMIs, as
- * long as the nesting level does not overflow an int. (You will probably
- * run out of stack space first.)
+ * rdtp->dynticks_irq_nesting to let the RCU grace-period handling know
+ * that the CPU is active. This implementation permits nested
+ * interrupts including NMIs, as long as the nesting level does not
+ * overflow an int. (You will probably run out of stack space first.)
*
- * If you add or remove a call to rcu_nmi_enter(), be sure to test
- * with CONFIG_RCU_EQS_DEBUG=y.
+ * If you add or remove a call to rcu_irq_enter_common(), be sure to
+ * test with CONFIG_RCU_EQS_DEBUG=y.
*/
-void rcu_nmi_enter(void)
+static __always_inline void rcu_irq_enter_common(bool nmi)
{
struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
long incby = 2;

/* Complain about underflow. */
- WARN_ON_ONCE(rdtp->dynticks_nmi_nesting < 0);
+ WARN_ON_ONCE(rdtp->dynticks_irq_nesting < 0);

/*
* If idle from RCU viewpoint, atomically increment ->dynticks
- * to mark non-idle and increment ->dynticks_nmi_nesting by one.
- * Otherwise, increment ->dynticks_nmi_nesting by two. This means
- * if ->dynticks_nmi_nesting is equal to one, we are guaranteed
+ * to mark non-idle and increment ->dynticks_irq_nesting by one.
+ * Otherwise, increment ->dynticks_irq_nesting by two. This means
+ * if ->dynticks_irq_nesting is equal to one, we are guaranteed
* to be in the outermost NMI handler that interrupted an RCU-idle
* period (observation due to Andy Lutomirski).
*/
if (rcu_dynticks_curr_cpu_in_eqs()) {
+
+ if (!nmi)
+ rcu_dynticks_task_exit();
+
rcu_dynticks_eqs_exit();
+
+ if (!nmi)
+ rcu_cleanup_after_idle();
+
incby = 1;
}
trace_rcu_dyntick(incby == 1 ? TPS("Endirq") : TPS("++="),
- rdtp->dynticks_nmi_nesting,
- rdtp->dynticks_nmi_nesting + incby, rdtp->dynticks);
- WRITE_ONCE(rdtp->dynticks_nmi_nesting, /* Prevent store tearing. */
- rdtp->dynticks_nmi_nesting + incby);
+ rdtp->dynticks_irq_nesting,
+ rdtp->dynticks_irq_nesting + incby, rdtp->dynticks);
+ WRITE_ONCE(rdtp->dynticks_irq_nesting, /* Prevent store tearing. */
+ rdtp->dynticks_irq_nesting + incby);
barrier();
}

/**
+ * rcu_nmi_enter - inform RCU of entry to NMI context
+ */
+void rcu_nmi_enter(void)
+{
+ rcu_irq_enter_common(true);
+}
+
+/**
* rcu_irq_enter - inform RCU that current CPU is entering irq away from idle
*
* Enter an interrupt handler, which might possibly result in exiting
@@ -977,14 +1002,8 @@ void rcu_nmi_enter(void)
*/
void rcu_irq_enter(void)
{
- struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
-
lockdep_assert_irqs_disabled();
- if (rdtp->dynticks_nmi_nesting == 0)
- rcu_dynticks_task_exit();
- rcu_nmi_enter();
- if (rdtp->dynticks_nmi_nesting == 1)
- rcu_cleanup_after_idle();
+ rcu_irq_enter_common(false);
}

/*
@@ -1092,7 +1111,7 @@ bool rcu_lockdep_current_cpu_online(void)
static int rcu_is_cpu_rrupt_from_idle(void)
{
return __this_cpu_read(rcu_dynticks.dynticks_nesting) <= 0 &&
- __this_cpu_read(rcu_dynticks.dynticks_nmi_nesting) <= 1;
+ __this_cpu_read(rcu_dynticks.dynticks_irq_nesting) <= 1;
}

/*
diff --git a/kernel/rcu/tree.h b/kernel/rcu/tree.h
index 4e74df7..80ba455 100644
--- a/kernel/rcu/tree.h
+++ b/kernel/rcu/tree.h
@@ -39,7 +39,7 @@
*/
struct rcu_dynticks {
long dynticks_nesting; /* Track process nesting level. */
- long dynticks_nmi_nesting; /* Track irq/NMI nesting level. */
+ long dynticks_irq_nesting; /* Track irq/NMI nesting level. */
atomic_t dynticks; /* Even value for idle, else odd. */
bool rcu_need_heavy_qs; /* GP old, need heavy quiescent state. */
unsigned long rcu_qs_ctr; /* Light universal quiescent state ctr. */
diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
index c1b17f5..2cd637d 100644
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -1811,7 +1811,7 @@ static void print_cpu_stall_info(struct rcu_state *rsp, int cpu)
"!."[!delta],
ticks_value, ticks_title,
rcu_dynticks_snap(rdtp) & 0xfff,
- rdtp->dynticks_nesting, rdtp->dynticks_nmi_nesting,
+ rdtp->dynticks_nesting, rdtp->dynticks_irq_nesting,
rdp->softirq_snap, kstat_softirqs_cpu(RCU_SOFTIRQ, cpu),
READ_ONCE(rsp->n_force_qs) - rsp->n_force_qs_gpstart,
fast_no_hz);
\
 
 \ /
  Last update: 2018-06-21 08:40    [W:0.658 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site