lkml.org 
[lkml]   [2018]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH 0/2] Add support for the ConnectCore 6UL SOM and SBC Express
    Date
    This patchset adds a device tree include for the ConnectCore 6UL
    System-On-Module and a device tree for the ConnectCore 6UL SBC Express board
    that includes it.

    Not all the SOM hardware is supported in this initial patchset, specifically
    the 802.11 WiFi and BT chipset and the extended functionality provided by
    the on module NXP Kinetis KL03 are not supported.

    The SOM is based on NXP's i.MX6UL SoC, and the patchset is tested against
    v4.18-rc1.

    More information about the hardware can be found at:

    ConnectCore 6UL SOM:
    https://www.digi.com/products/embedded-systems/system-on-modules/connectcore-for-i-mx6ul

    ConnectCore 6UL SBC Express board:
    https://www.digi.com/products/embedded-systems/single-board-computers/connectcore-for-i-mx6ul-sbc-express

    Alex Gonzalez (2):
    ARM: dts: imx6ul: Add DTS for ConnectCore 6UL System-On-Module (SOM)
    ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Express

    arch/arm/boot/dts/Makefile | 1 +
    arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts | 205 ++++++++++++++++++++++++
    arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi | 199 +++++++++++++++++++++++
    3 files changed, 405 insertions(+)
    create mode 100644 arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts
    create mode 100644 arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi

    \
     
     \ /
      Last update: 2018-06-19 09:33    [W:2.645 / U:0.196 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site