lkml.org 
[lkml]   [2018]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/4] ARM: dts: i.MX6: imx6dl-mamoj: Add usb host and device support
On Thu, Jun 07, 2018 at 07:17:48PM +0530, Jagan Teki wrote:
> From: Michael Trimarchi <michael@amarulasolutions.com>
>
> Add USB host and device support for BTicino i.MX6DL Mamoj board.
>
> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
> Changes for v2:
> - collect Fabio r-w-b tag
>
> arch/arm/boot/dts/imx6dl-mamoj.dts | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
> index 5034b086035f..a727e1471006 100644
> --- a/arch/arm/boot/dts/imx6dl-mamoj.dts
> +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
> @@ -134,6 +134,17 @@
> vin-supply = <&reg_lcd_vgl>;
> };
>
> + reg_usb_host: regulator-usb-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usbhost-vbus";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbhost>;
> + regulator-min-microvolt = <50000000>;
> + regulator-max-microvolt = <50000000>;
> + gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> reg_wl18xx_vmmc: regulator-wl18xx-vmcc {
> compatible = "regulator-fixed";
> regulator-name = "vwl1807";
> @@ -297,6 +308,16 @@
> status = "okay";
> };
>
> +&usbh1 {
> + vbus-supply = <&reg_usb_host>;
> + status = "okay";
> +};
> +
> +&usbotg {
> + dr_mode = "peripheral";
> + status = "okay";
> +};
> +
> &usdhc1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usdhc1>;
> @@ -428,6 +449,12 @@
> >;
> };
>
> + pinctrl_usbhost: usbhost {

usbhostgrp.

Shawn

> + fsl,pins = <
> + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
> + >;
> + };
> +
> pinctrl_usdhc1: usdhc1grp {
> fsl,pins = <
> MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069
> --
> 2.14.3
>

\
 
 \ /
  Last update: 2018-06-19 04:47    [W:0.047 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site