lkml.org 
[lkml]   [2018]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: imx6: RIoTboard Add chosen stdout-path property
On Mon, 18 Jun 2018 18:03:17 +0200
Lucas Stach <l.stach@pengutronix.de> wrote:

> Am Montag, den 18.06.2018, 17:42 +0200 schrieb Emmanuel Vadot:
> > The RIoTboard debug uart is connected to serial1.
> > Add a chosen property in the DTS so OS knows what serial port to use for
> > the console.
> >
> > > Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
> > ---
> >  arch/arm/boot/dts/imx6dl-riotboard.dts | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
> > index 2e98c92adff7..315d2ae6fa45 100644
> > --- a/arch/arm/boot/dts/imx6dl-riotboard.dts
> > +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
> > @@ -19,6 +19,10 @@
> > >   reg = <0x10000000 0x40000000>;
> > >   };
> >  
> > > + chosen {
> > + stdout-path = "serial1:115200n8";
>
> If there a reason to deviate from the "stdout-path = &uart1;" notation
> used by other i.MX boards?
>
> Regards,
> Lucas

This is, AFAIK, the proper way to specify the stdout-path.
See
https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/chosen.txt#L31

Cheers,

> > + };
> > +
> > >   regulators {
> > >   compatible = "simple-bus";
> > >   #address-cells = <1>;
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


--
Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>

\
 
 \ /
  Last update: 2018-06-18 18:38    [W:0.075 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site