lkml.org 
[lkml]   [2018]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v3 1/2] r8169: Don't disable ASPM in the driver
Date
Enable or disable ASPM should be done in PCI core instead of in the
device driver.

Commit ba04c7c93bbc ("r8169: disable ASPM") uses
pci_disable_link_state() to disable ASPM, but it's not the best way to
do it. If the device really wants to disable ASPM, we can use a quirk in
PCI core to prevent the PCI core from setting ASPM before probe.

Let's remove pci_disable_link_state() for now. Use PCI core quirks if
any regression happens.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v3:
- Change commit message wording.
- Rename the function to rtl_hw_aspm_clkreq_enable().

v2:
- Remove module parameter.
- Remove pci_disable_link_state().

drivers/net/ethernet/realtek/r8169.c | 5 -----
1 file changed, 5 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 75dfac0248f4..9b55ce513a36 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -25,7 +25,6 @@
#include <linux/dma-mapping.h>
#include <linux/pm_runtime.h>
#include <linux/firmware.h>
-#include <linux/pci-aspm.h>
#include <linux/prefetch.h>
#include <linux/ipv6.h>
#include <net/ip6_checksum.h>
@@ -7647,10 +7646,6 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
mii->reg_num_mask = 0x1f;
mii->supports_gmii = cfg->has_gmii;

- /* disable ASPM completely as that cause random device stop working
- * problems as well as full system hangs for some PCIe devices users */
- pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
- PCIE_LINK_STATE_CLKPM);

/* enable device (incl. PCI PM wakeup and hotplug setup) */
rc = pcim_enable_device(pdev);
--
2.17.0
\
 
 \ /
  Last update: 2018-06-15 07:33    [W:0.025 / U:7.972 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site