lkml.org 
[lkml]   [2018]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] gpio: uniphier: set legitimate irq trigger type in .to_irq hook
On Thu, Jun 14, 2018 at 7:27 AM, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:

> If a GPIO chip is a part of a hierarchy IRQ domain, there is no
> way to specify the trigger type when gpio(d)_to_irq() allocates an
> interrupt on-the-fly.
>
> Currently, uniphier_gpio_to_irq() sets IRQ_TYPE_NONE, but it causes
> an error in the .alloc() hook of the parent domain.
> (drivers/irq/irq-uniphier-aidet.c)
>
> Even if we change irq-uniphier-aidet.c to accept the NONE type,
> GIC complains about it since commit 83a86fbb5b56 ("irqchip/gic:
> Loudly complain about the use of IRQ_TYPE_NONE").
>
> Instead, use IRQ_TYPE_LEVEL_HIGH as a temporary value when an irq
> is allocated. irq_set_irq_type() will override it when the irq is
> really requested.
>
> Fixes: dbe776c2ca54 ("gpio: uniphier: add UniPhier GPIO controller driver")
> Reported-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Tested-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>

Patch applied for fixes!

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2018-06-14 16:21    [W:0.035 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site