lkml.org 
[lkml]   [2018]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/6] dt: qcom: 8996: thermal: Move to DT initialisation
Date
We also split up the regmap address space into two, one for the TM
registers, the other for the SROT registers. This was required to deal with
different address offsets for the TM and SROT registers across different
SoC families.

Since tsens-common.c/init_common() currently only registers one address
space, the order is important (TM before SROT). This is OK since the code
doesn't really use the SROT functionality yet.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8c7f9ca..6c8a857 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -461,7 +461,17 @@

tsens0: thermal-sensor@4a8000 {
compatible = "qcom,msm8996-tsens";
- reg = <0x4a8000 0x2000>;
+ reg = <0x4a9000 0x1000>, /* TM */
+ <0x4a8000 0x1000>; /* SROT */
+ #qcom,sensors = <13>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@4ac000 {
+ compatible = "qcom,msm8996-tsens";
+ reg = <0x4ad000 0x1000>, /* TM */
+ <0x4ac000 0x1000>; /* SROT */
+ #qcom,sensors = <8>;
#thermal-sensor-cells = <1>;
};

--
2.7.4
\
 
 \ /
  Last update: 2018-06-14 12:45    [W:0.086 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site