lkml.org 
[lkml]   [2018]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: stingray: use NUM_SATA to configure number of sata ports
From
Date
Hi Rob,

Thanks for comment - reply inline.


On 18-06-13 12:31 PM, Florian Fainelli wrote:
> On 06/12/2018 03:54 PM, Rob Herring wrote:
>> On Thu, Jun 7, 2018 at 12:53 PM, Scott Branden
>> <scott.branden@broadcom.com> wrote:
>>> Hi Rob,
>>>
>>> Could you please kindly comment on change below.
>>>
>>> It allows board variants to be added easily via a simple define for
>>> different number of SATA ports.
>>>
>>>
>>>
>>> On 18-06-04 09:22 AM, Florian Fainelli wrote:
>>>> On 05/18/2018 11:34 AM, Scott Branden wrote:
>>>>> Move remaining sata configuration to stingray-sata.dtsi and enable
>>>>> ports based on NUM_SATA defined.
>>>>> Now, all that needs to be done is define NUM_SATA per board.
>>>> Rob could you review this and let us know if this approach is okay or
>>>> not? Thank you!
>>>>
>>>>> Signed-off-by: Scott Branden <scott.branden@broadcom.com>
>>>>> ---
>>>>> diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
>>>>> b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
>>>>> index 8c68e0c..7f6d176 100644
>>>>> --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
>>>>> +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
>>>>> @@ -43,7 +43,11 @@
>>>>> interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>>>>> #address-cells = <1>;
>>>>> #size-cells = <0>;
>>>>> +#if (NUM_SATA > 0)
>>>>> + status = "okay";
>>>>> +#else
>>>>> status = "disabled";
>>>>> +#endif
>> This only works if ports are contiguously enabled (0-N). You might not
>> care, but it is not a pattern that works in general.
Correct - all board designs that include this dtsi file follow such
commonality (ie. design with SATA0 first, etc).  By having common board
designs it allows for commonality in dts files rather than duplicating
information everywhere.  If somebody designs a bizarro board they are
free to create their own dts file of course.
>> And I'm not a fan
>> of C preprocessing in DT files in general beyond just defines for
>> single numbers.
The use of a define to specify the number of SATA ports in the board
design meets our requirements of being able to maintain many boards.  We
need a method to specify the number of ports in the board design rather
than copying and pasting the information in many dts files.  If you have
an alternative upstreamable mechanism to manage the configuration of
many boards without copy and paste that would be ideal?
> Should we interpret this as a formal NAK?

\
 
 \ /
  Last update: 2018-06-13 22:19    [W:0.086 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site