lkml.org 
[lkml]   [2018]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] WAN: LMC: fix up indentations with tabs
Date
From: Colin Ian King <colin.king@canonical.com>

Currently this source is using a mix of 4 char spaces and tabs
for indentations. Clean this up to consistently use tabs. Also
add some white spaces in switch statements.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
drivers/net/wan/lmc/lmc_proto.c | 79 ++++++++++++++++-----------------
1 file changed, 39 insertions(+), 40 deletions(-)

diff --git a/drivers/net/wan/lmc/lmc_proto.c b/drivers/net/wan/lmc/lmc_proto.c
index f600075e84a2..5a6c87bce1bf 100644
--- a/drivers/net/wan/lmc/lmc_proto.c
+++ b/drivers/net/wan/lmc/lmc_proto.c
@@ -49,17 +49,17 @@
// attach
void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/
{
- lmc_trace(sc->lmc_device, "lmc_proto_attach in");
- if (sc->if_type == LMC_NET) {
- struct net_device *dev = sc->lmc_device;
- /*
- * They set a few basics because they don't use HDLC
- */
- dev->flags |= IFF_POINTOPOINT;
- dev->hard_header_len = 0;
- dev->addr_len = 0;
- }
- lmc_trace(sc->lmc_device, "lmc_proto_attach out");
+ lmc_trace(sc->lmc_device, "lmc_proto_attach in");
+ if (sc->if_type == LMC_NET) {
+ struct net_device *dev = sc->lmc_device;
+ /*
+ * They set a few basics because they don't use HDLC
+ */
+ dev->flags |= IFF_POINTOPOINT;
+ dev->hard_header_len = 0;
+ dev->addr_len = 0;
+ }
+ lmc_trace(sc->lmc_device, "lmc_proto_attach out");
}

int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd)
@@ -99,37 +99,36 @@ void lmc_proto_close(lmc_softc_t *sc)

__be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
{
- lmc_trace(sc->lmc_device, "lmc_proto_type in");
- switch(sc->if_type){
- case LMC_PPP:
- return hdlc_type_trans(skb, sc->lmc_device);
- break;
- case LMC_NET:
- return htons(ETH_P_802_2);
- break;
- case LMC_RAW: /* Packet type for skbuff kind of useless */
- return htons(ETH_P_802_2);
- break;
- default:
- printk(KERN_WARNING "%s: No protocol set for this interface, assuming 802.2 (which is wrong!!)\n", sc->name);
- return htons(ETH_P_802_2);
- break;
- }
- lmc_trace(sc->lmc_device, "lmc_proto_tye out");
-
+ lmc_trace(sc->lmc_device, "lmc_proto_type in");
+ switch (sc->if_type) {
+ case LMC_PPP:
+ return hdlc_type_trans(skb, sc->lmc_device);
+ break;
+ case LMC_NET:
+ return htons(ETH_P_802_2);
+ break;
+ case LMC_RAW: /* Packet type for skbuff kind of useless */
+ return htons(ETH_P_802_2);
+ break;
+ default:
+ printk(KERN_WARNING "%s: No protocol set for this interface, assuming 802.2 (which is wrong!!)\n", sc->name);
+ return htons(ETH_P_802_2);
+ break;
+ }
+ lmc_trace(sc->lmc_device, "lmc_proto_tye out");
}

void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
{
- lmc_trace(sc->lmc_device, "lmc_proto_netif in");
- switch(sc->if_type){
- case LMC_PPP:
- case LMC_NET:
- default:
- netif_rx(skb);
- break;
- case LMC_RAW:
- break;
- }
- lmc_trace(sc->lmc_device, "lmc_proto_netif out");
+ lmc_trace(sc->lmc_device, "lmc_proto_netif in");
+ switch (sc->if_type) {
+ case LMC_PPP:
+ case LMC_NET:
+ default:
+ netif_rx(skb);
+ break;
+ case LMC_RAW:
+ break;
+ }
+ lmc_trace(sc->lmc_device, "lmc_proto_netif out");
}
--
2.17.0
\
 
 \ /
  Last update: 2018-06-13 08:05    [W:0.025 / U:19.056 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site