lkml.org 
[lkml]   [2018]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 19/28] drm/mediatek: add connection from RDMA2 to DPI1
From
Date
Hi, Stu:

On Wed, 2018-06-13 at 16:58 +0800, Stu Hsieh wrote:
> Hi, CK:
>
> On Wed, 2018-06-13 at 16:14 +0800, CK Hu wrote:
> > Hi, Stu:
> >
> > On Wed, 2018-06-13 at 16:01 +0800, Stu Hsieh wrote:
> > > Hi, CK:
> > >
> > >
> > > On Wed, 2018-06-13 at 15:13 +0800, CK Hu wrote:
> > > > Hi, Stu:
> > > >
> > > > On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> > > > > This patch add the connection from RDMA2 to DPI1
> > > > >
> > > > > Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
> > > > > ---
> > > > > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++
> > > > > 1 file changed, 8 insertions(+)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > > > index 31a0832ef9ec..2d883815d79c 100644
> > > > > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > > > @@ -93,9 +93,11 @@
> > > > > #define RDMA1_MOUT_DPI0 0x2
> > > > > #define RDMA1_MOUT_DPI1 0x3
> > > > > #define RDMA2_MOUT_DPI0 0x2
> > > > > +#define RDMA2_MOUT_DPI1 0x3
> > > >
> > > > Usually, each bit of a mout register represent a output enable. Is this
> > > > value 0x3 a correct value?
> > > >
> > > > Regards,
> > > > CK
> > > >
> > > In HW CONFIG SPEC or MT2712_E2_MMSYS_Change_note show as following:
> > >
> > > Bit(s) Name Description
> > > 2:0 DISP_RDMA2_SOUT_SEL_IN 0: output to dsi0
> > > 1: outptu to dsi1
> > > 2: output to dpi0
> > > 3: output to dpi1
> > > 4: output to dsi2
> > > 5: output to dsi3
> > >
> > > So, 0x3 is correct value.
> >
> > The data sheet use the term SOUT match its function, so I think driver
> > have better change the naming to SOUT.
> >
> > Regards,
> > CK
> >
>
> The definition DISP_REG_CONFIG_DISP_RDMA2_SOUT is use term SOUT in this
> patch.
>

I know, but RDMA2_MOUT_DPI1 should be changed to RDMA2_SOUT_DPI1.

Regards,
CK

> Regard,
> Stu
>
> > >
> > > Regard,
> > > Stu
> > >
> > > > > #define DPI0_SEL_IN_RDMA1 0x1
> > > > > #define DPI0_SEL_IN_RDMA2 0x3
> > > > > #define DPI1_SEL_IN_RDMA1 (0x1 << 8)
> > > > > +#define DPI1_SEL_IN_RDMA2 (0x3 << 8)
> > > > > #define DSI1_SEL_IN_RDMA1 0x1
> > > > > #define DSI2_SEL_IN_RDMA1 (0x1 << 16)
> > > > > #define DSI3_SEL_IN_RDMA1 (0x1 << 16)
> > > > > @@ -199,6 +201,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
> > > > > } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
> > > > > *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
> > > > > value = RDMA2_MOUT_DPI0;
> > > > > + } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
> > > > > + *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
> > > > > + value = RDMA2_MOUT_DPI1;
> > > > > } else {
> > > > > value = 0;
> > > > > }
> > > > > @@ -233,6 +238,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
> > > > > } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
> > > > > *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > > > > value = DPI0_SEL_IN_RDMA2;
> > > > > + } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
> > > > > + *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > > > > + value = DPI1_SEL_IN_RDMA2;
> > > > > } else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
> > > > > *addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
> > > > > value = COLOR1_SEL_IN_OVL1;
> > > >
> > > >
> > >
> > >
> >
> >
>
>


\
 
 \ /
  Last update: 2018-06-13 11:01    [W:0.763 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site