lkml.org 
[lkml]   [2018]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: kernel BUG at drivers/scsi/scsi_error.c:197! - git 4.17.0-x64-08428-g7d3bf613e99a
Date
В сообщении от Wednesday 13 June 2018 07:03:47 jianchao.wang написал(а):
> On 06/12/2018 11:28 PM, Bart Van Assche wrote:
> > On Sat, 2018-06-09 at 08:02 -0700, Randy Dunlap wrote:
> >> On 06/09/2018 06:06 AM, Andrew Randrianasulu wrote:
> >>> Hello, everyone!
> >>>
> >>> I was trying to test not-yet-completed 4.18-rc1, and run into this bug,
> >>> probably due to HAL (yes, I still use this) trying to poll empty DVD-RW
> >>> drive:
> >>>
> >>> [ 35.040167] ------------[ cut here ]------------
> >>> [ 35.040171] kernel BUG at drivers/scsi/scsi_error.c:197!
> >>> [ 35.040196] invalid opcode: 0000 [#1] SMP NOPTI
> >>> [ 35.040210] CPU: 2 PID: 117 Comm: kworker/2:1H Not tainted
> >>> 4.17.0-x64-08428-g7d3bf613e99a-dirty #18
> >>> [ 35.040225] Hardware name: MSI MS-7693/970A-G46 (MS-7693), BIOS V2.8
> >>> 01/08/2016
> >>> [ 35.040244] Workqueue: kblockd blk_mq_timeout_work
> >>> [ 35.040283] RIP: 0010:scsi_times_out+0xe9/0x1a6 [scsi_mod]
> >>> [ 35.040287] Code: 03 76 18 48 c7 c2 f9 c2 01 a0 48 89 ee 48 c7 c7 14
> >>> be 01 a0 31 c0 e8 76 ad 00 00 48 8b 83 98 01 00 00 a8 01 0f 84 a5 00 00
> >>> 00 <0f> 0b 49 8b 7c 24 38 e8 8f ba 4b e1 41 83 bc 24 2c 01
> >>> 00 00 ff 74
> >>> [ 35.040312] RSP: 0018:ffffc90000293d98 EFLAGS: 00010202
> >>> [ 35.040318] RAX: ffff88031f240605 RBX: ffff88031eed8500 RCX:
> >>> 00000000fffefd40 [ 35.040323] RDX: ffffc90000293e80 RSI:
> >>> 0000000000002007 RDI: ffff88031eed8638 [ 35.040327] RBP:
> >>> ffff88031eed8638 R08: ffff88031eed85d8 R09: 0000000000000000 [
> >>> 35.040332] R10: 0000000000000040 R11: fefefefefefefeff R12:
> >>> ffff88031f2a8800 [ 35.040336] R13: ffff88031f2a8800 R14:
> >>> ffff88031f29e910 R15: 0000000000000001 [ 35.040341] FS:
> >>> 0000000000000000(0000) GS:ffff88032ed00000(0000) knlGS:0000000000000000
> >>> [ 35.040346] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >>> [ 35.040350] CR2: 00000000f7ea83c0 CR3: 000000031e194000 CR4:
> >>> 00000000000406e0 [ 35.040354] Call Trace:
> >>> [ 35.040360] blk_mq_check_expired+0xdc/0x10c
> >>> [ 35.040365] bt_iter+0x42/0x45
> >>> [ 35.040369] __sbitmap_for_each_set.constprop.12+0x83/0xac
> >>> [ 35.040374] ? blk_mq_update_nr_requests+0xad/0xad
> >>> [ 35.040595] ? blk_mq_exit_hctx+0xda/0xda
> >>> [ 35.041595] blk_mq_queue_tag_busy_iter+0xa3/0xb4
> >>> [ 35.042578] ? blk_mq_exit_hctx+0xda/0xda
> >>> [ 35.043550] blk_mq_timeout_work+0x6b/0xca
> >>> [ 35.044505] process_one_work+0x17c/0x2a6
> >>> [ 35.045445] worker_thread+0x19f/0x243
> >>> [ 35.046393] ? rescuer_thread+0x262/0x262
> >>> [ 35.047346] kthread+0x100/0x108
> >>> [ 35.048290] ? kthread_destroy_worker+0x3e/0x3e
> >>> [ 35.049242] ret_from_fork+0x27/0x50
> >>> [ 35.050192] Modules linked in: bridge stp llc bnep rfcomm hidp
> >>> snd_aloop ipv6
>
> .....
>
> > Is this something that happens systematically or sporadically?
> > Additionally, have you verified whether or not this can be triggered with
> > kernel v4.17? I'm wondering whether or not this is a regression that was
> > introduced in the merge window.
>
> I suspect this is due to we could expire a same request twice or even more.
> For scsi mid-layer, it return BLK_EH_DONE from .timeout, in fact, the
> request is not completed there, but just queue a delayed abort_work
> (HZ/100). If the blk_mq_timeout_work runs again before the abort_work, the
> request will be timed out again, because there is not any mark on it to
> identify this request has been timed out.
>
> Would please try the patch attached on to see whether this issue could be
> fixed ? (this patch only works for scsi device currently)

with this patch on top of 4.17.0-x64-11730-gf5b7769eb040-dirty I can
suspend/resume my machine again, no errors in dmesg (attached)

Thanks!

>
> Thanks
> Jianchao


[ 0.000000] Linux version 4.17.0-x64-11730-gf5b7769eb040-dirty (guest@slax) (gcc version 4.9.2 (GCC)) #18 SMP Wed Jun 13 07:50:06 MSK 2018
[ 0.000000] Command line: BOOT_IMAGE=Lin-4.18-x64 ro root=802 nocd vt.default_utf8=0 scsi_mod.use_blk_mq=1 nouveau.debug=pci=debug log_buf_len=1M
[ 0.000000] random: get_random_u32 called from bsp_init_amd+0xd0/0x1af with crng_init=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cd9a8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd9a9000-0x00000000cdb33fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdb34000-0x00000000cde7cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cde7d000-0x00000000cea42fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cea43000-0x00000000cea43fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cea44000-0x00000000cec49fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cec4a000-0x00000000cf06dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf06e000-0x00000000cf7eefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf7ef000-0x00000000cf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000032effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7693/970A-G46 (MS-7693), BIOS V2.8 01/08/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] last_pfn = 0x32f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CF800000 mask FFFFFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000032f000000 aka 13040M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [(____ptrval____)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02269000, 0x02269fff] PGTABLE
[ 0.000000] BRK [0x0226a000, 0x0226afff] PGTABLE
[ 0.000000] BRK [0x0226b000, 0x0226bfff] PGTABLE
[ 0.000000] BRK [0x0226c000, 0x0226cfff] PGTABLE
[ 0.000000] BRK [0x0226d000, 0x0226dfff] PGTABLE
[ 0.000000] BRK [0x0226e000, 0x0226efff] PGTABLE
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 126604(96%)
[ 0.000000] RAMDISK: [mem 0x7fdc5000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CDE6D070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CDE73528 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180508/tbfadt-624)
[ 0.000000] ACPI: DSDT 0x00000000CDE6D160 0063C2 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CDE76080 000040
[ 0.000000] ACPI: APIC 0x00000000CDE73638 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CDE736B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000CDE73700 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000CDE73740 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CDE73778 000B9C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: IVRS 0x00000000CDE74318 0000C0 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: No reference (HPET/PMTIMER) available
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000032effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cd9a8fff]
[ 0.000000] node 0: [mem 0x00000000cea43000-0x00000000cea43fff]
[ 0.000000] node 0: [mem 0x00000000cec4a000-0x00000000cf06dfff]
[ 0.000000] node 0: [mem 0x00000000cf7ef000-0x00000000cf7fffff]
[ 0.000000] node 0: [mem 0x0000000100001000-0x000000032effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000032effffff]
[ 0.000000] On node 0 totalpages: 3132795
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13112 pages used for memmap
[ 0.000000] DMA32 zone: 839135 pages, LIFO batch:31
[ 0.000000] Normal zone: 35776 pages used for memmap
[ 0.000000] Normal zone: 2289663 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd9a9000-0xcdb33fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdb34000-0xcde7cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcde7d000-0xcea42fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcea44000-0xcec49fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf06e000-0xcf7eefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] [mem 0xcf800000-0xfebfffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 43 pages/cpu @(____ptrval____) s135384 r8192 d32552 u524288
[ 0.000000] pcpu-alloc: s135384 r8192 d32552 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3083822
[ 0.000000] Kernel command line: BOOT_IMAGE=Lin-4.18-x64 ro root=802 nocd vt.default_utf8=0 scsi_mod.use_blk_mq=1 nouveau.debug=pci=debug log_buf_len=1M
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 12155472K/12531180K available (8204K kernel code, 980K rwdata, 2564K rodata, 1248K init, 388K bss, 375708K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 27778 entries in 109 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180508
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: Fast TSC calibration using PIT
[ 0.028000] tsc: Detected 3800.054 MHz processor
[ 0.028000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8d176edc6, max_idle_ns: 881590945952 ns
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7600.10 BogoMIPS (lpj=15200216)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028000] CPU: Physical Processor ID: 0
[ 0.028000] CPU: Processor Core ID: 0
[ 0.028000] mce: CPU supports 7 MCE banks
[ 0.028000] LVT offset 1 assigned for vector 0xf9
[ 0.028000] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.028000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.028000] Spectre V2 : Vulnerable: Minimal AMD ASM retpoline
[ 0.028000] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.028000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.028000] Freeing SMP alternatives memory: 16K
[ 0.040000] smpboot: CPU0: AMD FX(tm)-4300 Quad-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[ 0.040000] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.040000] ... version: 0
[ 0.040000] ... bit width: 48
[ 0.040000] ... generic registers: 6
[ 0.040000] ... value mask: 0000ffffffffffff
[ 0.040000] ... max period: 00007fffffffffff
[ 0.040000] ... fixed-purpose events: 0
[ 0.040000] ... event mask: 000000000000003f
[ 0.040000] Hierarchical SRCU implementation.
[ 0.040000] smp: Bringing up secondary CPUs ...
[ 0.040000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.040000] x86: Booting SMP configuration:
[ 0.040000] .... node #0, CPUs: #1 #2 #3
[ 0.044025] smp: Brought up 1 node, 4 CPUs
[ 0.044109] smpboot: Max logical packages: 1
[ 0.044161] smpboot: Total of 4 processors activated (30400.43 BogoMIPS)
[ 0.048381] devtmpfs: initialized
[ 0.048381] PM: Registering ACPI NVS region [mem 0xcdb34000-0xcde7cfff] (3444736 bytes)
[ 0.048381] PM: Registering ACPI NVS region [mem 0xcea44000-0xcec49fff] (2121728 bytes)
[ 0.048381] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.048412] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.048512] pinctrl core: initialized pinctrl subsystem
[ 0.048715] NET: Registered protocol family 16
[ 0.048860] audit: initializing netlink subsys (disabled)
[ 0.048919] audit: type=2000 audit(1528885998.048:1): state=initialized audit_enabled=0 res=1
[ 0.048919] cpuidle: using governor ladder
[ 0.048919] cpuidle: using governor menu
[ 0.048919] ACPI: bus type PCI registered
[ 0.048919] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.048919] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.048919] PCI: not using MMCONFIG
[ 0.048919] PCI: Using configuration type 1 for base access
[ 0.048919] PCI: Using configuration type 1 for extended access
[ 0.048919] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.048919] ACPI: Added _OSI(Module Device)
[ 0.048919] ACPI: Added _OSI(Processor Device)
[ 0.048919] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.048919] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.048919] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.054771] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.056205] ACPI: Interpreter enabled
[ 0.056299] ACPI: (supports S0 S3 S4 S5)
[ 0.056351] ACPI: Using IOAPIC for interrupt routing
[ 0.056522] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.056625] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.056705] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.056922] ACPI: Enabled 11 GPEs in block 00 to 1F
[ 0.060305] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.060364] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.060437] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.060716] PCI host bridge to bus 0000:00
[ 0.060769] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.060826] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.060882] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.060938] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.060995] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.061063] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.061132] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
[ 0.061200] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.061262] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.061368] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.061465] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.061509] pci 0000:00:02.0: enabling Extended Tags
[ 0.061581] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.061658] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.061673] pci 0000:00:04.0: enabling Extended Tags
[ 0.061744] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.061832] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.061848] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
[ 0.061854] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
[ 0.061861] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
[ 0.061867] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
[ 0.061874] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.061880] pci 0000:00:11.0: reg 0x24: [mem 0xfd30b000-0xfd30b3ff]
[ 0.061978] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.061990] pci 0000:00:12.0: reg 0x10: [mem 0xfd30a000-0xfd30afff]
[ 0.062102] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.062117] pci 0000:00:12.2: reg 0x10: [mem 0xfd309000-0xfd3090ff]
[ 0.062175] pci 0000:00:12.2: supports D1 D2
[ 0.062176] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.062254] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.062266] pci 0000:00:13.0: reg 0x10: [mem 0xfd308000-0xfd308fff]
[ 0.062378] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.062393] pci 0000:00:13.2: reg 0x10: [mem 0xfd307000-0xfd3070ff]
[ 0.062450] pci 0000:00:13.2: supports D1 D2
[ 0.062451] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.062528] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.062650] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.062667] pci 0000:00:14.2: reg 0x10: [mem 0xfd300000-0xfd303fff 64bit]
[ 0.062744] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.062816] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.062933] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.063030] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.063043] pci 0000:00:14.5: reg 0x10: [mem 0xfd306000-0xfd306fff]
[ 0.063156] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.063184] pci 0000:00:15.0: enabling Extended Tags
[ 0.063267] pci 0000:00:15.0: supports D1 D2
[ 0.063354] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.063367] pci 0000:00:16.0: reg 0x10: [mem 0xfd305000-0xfd305fff]
[ 0.063479] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.063494] pci 0000:00:16.2: reg 0x10: [mem 0xfd304000-0xfd3040ff]
[ 0.063551] pci 0000:00:16.2: supports D1 D2
[ 0.063552] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.063630] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.063700] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.063767] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.063834] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.063903] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.063970] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.064074] pci 0000:01:00.0: [10de:0606] type 00 class 0x030000
[ 0.064086] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
[ 0.064093] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.064099] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.064104] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.064109] pci 0000:01:00.0: reg 0x30: [mem 0xfd000000-0xfd01ffff pref]
[ 0.064112] pci 0000:01:00.0: enabling Extended Tags
[ 0.064239] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.064294] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.064296] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfd0fffff]
[ 0.064298] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.064335] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.064358] pci 0000:02:00.0: reg 0x10: [mem 0xfd200000-0xfd207fff 64bit]
[ 0.064446] pci 0000:02:00.0: PME# supported from D3hot
[ 0.064507] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.064563] pci 0000:00:04.0: bridge window [mem 0xfd200000-0xfd2fffff]
[ 0.064573] pci_bus 0000:03: extended config space not accessible
[ 0.064676] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.064737] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.064738] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.064740] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.064741] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.064742] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.064743] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.064744] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
[ 0.064791] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.064816] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.064841] pci 0000:04:00.0: reg 0x18: [mem 0xfd104000-0xfd104fff 64bit pref]
[ 0.064856] pci 0000:04:00.0: reg 0x20: [mem 0xfd100000-0xfd103fff 64bit pref]
[ 0.064938] pci 0000:04:00.0: supports D1 D2
[ 0.064939] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065033] pci 0000:00:15.0: PCI bridge to [bus 04]
[ 0.065089] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
[ 0.065092] pci 0000:00:15.0: bridge window [mem 0xfd100000-0xfd1fffff]
[ 0.065109] pci_bus 0000:00: on NUMA node 0
[ 0.065440] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.065551] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.065663] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.065775] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
[ 0.065876] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.065967] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.066059] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.066150] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.068026] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.068082] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.068152] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.068207] vgaarb: loaded
[ 0.068300] pps_core: LinuxPPS API ver. 1 registered
[ 0.068353] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.068427] PTP clock support registered
[ 0.068481] EDAC MC: Ver: 3.0.0
[ 0.068599] PCI: Using ACPI for IRQ routing
[ 0.073412] PCI: pci_cache_line_size set to 64 bytes
[ 0.073454] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.073455] e820: reserve RAM buffer [mem 0xcd9a9000-0xcfffffff]
[ 0.073456] e820: reserve RAM buffer [mem 0xcea44000-0xcfffffff]
[ 0.073457] e820: reserve RAM buffer [mem 0xcf06e000-0xcfffffff]
[ 0.073458] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[ 0.073458] e820: reserve RAM buffer [mem 0x32f000000-0x32fffffff]
[ 0.073582] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.073637] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.076002] clocksource: Switched to clocksource tsc-early
[ 0.086762] VFS: Disk quotas dquot_6.6.0
[ 0.086830] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.086923] pnp: PnP ACPI init
[ 0.087082] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.087142] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.087356] system 00:01: [io 0x040b] has been reserved
[ 0.087423] system 00:01: [io 0x04d6] has been reserved
[ 0.087478] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.087533] system 00:01: [io 0x0c14] has been reserved
[ 0.087587] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.087642] system 00:01: [io 0x0c52] has been reserved
[ 0.087696] system 00:01: [io 0x0c6c] has been reserved
[ 0.087751] system 00:01: [io 0x0c6f] has been reserved
[ 0.087805] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.087860] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.087915] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.087970] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.088025] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.088080] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.088135] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.088190] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.088248] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.088303] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.088359] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.088416] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.088472] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.088528] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.088613] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.088670] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.088726] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[ 0.088785] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.088895] system 00:02: [io 0x0480-0x0481] has been reserved
[ 0.088952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.089117] pnp 00:03: [dma 0 disabled]
[ 0.089153] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.089175] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.089223] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.089281] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.089316] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.089437] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[ 0.089495] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.089581] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.089641] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.089735] pnp: PnP ACPI: found 9 devices
[ 0.095866] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.095968] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.096023] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.096079] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfd0fffff]
[ 0.096136] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.096206] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.096263] pci 0000:00:04.0: bridge window [mem 0xfd200000-0xfd2fffff]
[ 0.096321] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.096382] pci 0000:00:15.0: PCI bridge to [bus 04]
[ 0.096436] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
[ 0.096493] pci 0000:00:15.0: bridge window [mem 0xfd100000-0xfd1fffff]
[ 0.096553] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.096554] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.096556] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.096557] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.096558] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.096559] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.096560] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff window]
[ 0.096561] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.096562] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfd0fffff]
[ 0.096563] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.096564] pci_bus 0000:02: resource 1 [mem 0xfd200000-0xfd2fffff]
[ 0.096565] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window]
[ 0.096566] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.096567] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window]
[ 0.096568] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff window]
[ 0.096569] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.096570] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.096571] pci_bus 0000:03: resource 10 [mem 0xd0000000-0xffffffff window]
[ 0.096572] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.096573] pci_bus 0000:04: resource 1 [mem 0xfd100000-0xfd1fffff]
[ 0.096621] NET: Registered protocol family 2
[ 0.096786] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.096897] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.097254] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.097579] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.097681] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.097804] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.097956] NET: Registered protocol family 1
[ 0.188317] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x615 took 88172 usecs
[ 0.276307] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x615 took 85745 usecs
[ 0.364302] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x615 took 85747 usecs
[ 0.452308] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x615 took 85867 usecs
[ 0.452501] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.452689] PCI: CLS 64 bytes, default 64
[ 0.452718] Trying to unpack rootfs image as initramfs...
[ 0.481141] Freeing initrd memory: 2284K
[ 0.481624] iommu: Adding device 0000:00:00.0 to group 0
[ 0.481748] iommu: Adding device 0000:00:02.0 to group 1
[ 0.481867] iommu: Adding device 0000:00:04.0 to group 2
[ 0.481989] iommu: Adding device 0000:00:11.0 to group 3
[ 0.482112] iommu: Adding device 0000:00:12.0 to group 4
[ 0.482177] iommu: Adding device 0000:00:12.2 to group 4
[ 0.482306] iommu: Adding device 0000:00:13.0 to group 5
[ 0.486247] iommu: Adding device 0000:00:13.2 to group 5
[ 0.486367] iommu: Adding device 0000:00:14.0 to group 6
[ 0.486492] iommu: Adding device 0000:00:14.2 to group 7
[ 0.486611] iommu: Adding device 0000:00:14.3 to group 8
[ 0.486739] iommu: Adding device 0000:00:14.4 to group 9
[ 0.486869] iommu: Adding device 0000:00:14.5 to group 10
[ 0.487004] iommu: Adding device 0000:00:15.0 to group 11
[ 0.487129] iommu: Adding device 0000:00:16.0 to group 12
[ 0.487196] iommu: Adding device 0000:00:16.2 to group 12
[ 0.487318] iommu: Adding device 0000:01:00.0 to group 13
[ 0.487433] iommu: Adding device 0000:02:00.0 to group 14
[ 0.487498] iommu: Adding device 0000:04:00.0 to group 11
[ 0.528010] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.528064] AMD-Vi: Interrupt remapping enabled
[ 0.528196] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.529962] amd_uncore: AMD NB counters detected
[ 0.530073] LVT offset 0 assigned for vector 0x400
[ 0.530158] perf: AMD IBS detected (0x000000ff)
[ 0.530536] Scanning for low memory corruption every 60 seconds
[ 0.530941] Initialise system trusted keyrings
[ 0.531022] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[ 0.532174] pstore: using deflate compression
[ 0.532612] Key type asymmetric registered
[ 0.532664] Asymmetric key parser 'x509' registered
[ 0.532736] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.532845] io scheduler noop registered
[ 0.532931] io scheduler cfq registered (default)
[ 0.532985] io scheduler mq-deadline registered
[ 0.533037] io scheduler kyber registered
[ 0.533105] io scheduler bfq registered
[ 0.536291] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.556716] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.557572] brd: module loaded
[ 0.557806] i8042: PNP: No PS/2 controller found.
[ 0.557939] NET: Registered protocol family 17
[ 0.558368] microcode: CPU0: patch_level=0x06000822
[ 0.558427] microcode: CPU1: patch_level=0x06000822
[ 0.558510] microcode: CPU2: patch_level=0x06000822
[ 0.558569] microcode: CPU3: patch_level=0x06000822
[ 0.558645] microcode: Microcode Update Driver: v2.2.
[ 0.558653] sched_clock: Marking stable (558641946, 0)->(640089762, -81447816)
[ 0.558898] registered taskstats version 1
[ 0.558956] Loading compiled-in X.509 certificates
[ 0.559938] zswap: default zpool zbud not available
[ 0.559993] zswap: pool creation failed
[ 0.560219] hctosys: unable to open rtc device (rtc0)
[ 0.561891] Freeing unused kernel memory: 1248K
[ 0.582937] Write protecting the kernel read-only data: 14336k
[ 0.583731] Freeing unused kernel memory: 2020K
[ 0.587530] Freeing unused kernel memory: 1532K
[ 0.607103] SCSI subsystem initialized
[ 0.620083] libata version 3.00 loaded.
[ 0.624128] ahci 0000:00:11.0: version 3.0
[ 0.624297] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.624368] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.625083] scsi host0: ahci
[ 0.625279] scsi host1: ahci
[ 0.625451] scsi host2: ahci
[ 0.625626] scsi host3: ahci
[ 0.625803] scsi host4: ahci
[ 0.625968] scsi host5: ahci
[ 0.626088] ata1: SATA max UDMA/133 abar m1024@0xfd30b000 port 0xfd30b100 irq 19
[ 0.626168] ata2: SATA max UDMA/133 abar m1024@0xfd30b000 port 0xfd30b180 irq 19
[ 0.626237] ata3: SATA max UDMA/133 abar m1024@0xfd30b000 port 0xfd30b200 irq 19
[ 0.626306] ata4: SATA max UDMA/133 abar m1024@0xfd30b000 port 0xfd30b280 irq 19
[ 0.626374] ata5: SATA max UDMA/133 abar m1024@0xfd30b000 port 0xfd30b300 irq 19
[ 0.626443] ata6: SATA max UDMA/133 abar m1024@0xfd30b000 port 0xfd30b380 irq 19
[ 0.940299] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.942123] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.944299] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.946123] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.108033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.109709] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.110866] ata2.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
[ 1.112177] ata1.00: ATA-7: SAMSUNG HD300LJ, ZT100-12, max UDMA7
[ 1.112233] ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.112307] ata2.00: configured for UDMA/133
[ 1.116489] ata1.00: configured for UDMA/133
[ 1.116676] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD300LJ 0-12 PQ: 0 ANSI: 5
[ 1.117576] scsi 1:0:0:0: CD-ROM ASUS DRW-24D5MT 1.00 PQ: 0 ANSI: 5
[ 1.154150] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[ 1.154224] sd 0:0:0:0: [sda] Write Protect is off
[ 1.154278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.154285] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.168793] sda: sda1 sda2 sda3
[ 1.169288] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.504088] tsc: Refined TSC clocksource calibration: 3800.108 MHz
[ 1.504170] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d8d7b0e4ce, max_idle_ns: 881590614467 ns
[ 1.504287] clocksource: Switched to clocksource tsc
[ 2.202607] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.446114] random: fast init done
[ 4.053675] udev[154]: starting version 165
[ 4.423046] acpi_cpufreq: overriding BIOS provided _PSD data
[ 4.448090] MCE: In-kernel MCE decoding enabled.
[ 4.465082] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 4.465195] ACPI: Power Button [PWRB]
[ 4.465326] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.465408] ACPI: Power Button [PWRF]
[ 4.544404] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.544463] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.544463] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.544463] (Note that use of the override may cause unknown side effects.)
[ 4.549551] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.549629] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 4.549798] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 4.663005] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.663079] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.663319] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.688642] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.688946] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.690880] rtc_cmos 00:04: RTC can wake from S4
[ 4.691086] rtc_cmos 00:04: registered as rtc0
[ 4.691166] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.709968] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.710031] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.710727] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl, d8:cb:8a:56:80:48, XID 2c900800, IRQ 27
[ 4.710798] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.737518] ACPI: bus type USB registered
[ 4.737844] usbcore: registered new interface driver usbfs
[ 4.738041] usbcore: registered new interface driver hub
[ 4.738132] usbcore: registered new device driver usb
[ 4.901397] QUIRK: Enable AMD PLL fix
[ 4.901413] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 4.901475] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 4.911136] xhci_hcd 0000:02:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[ 4.911529] hub 1-0:1.0: USB hub found
[ 4.911588] hub 1-0:1.0: 2 ports detected
[ 4.911745] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 4.911802] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 4.911872] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 4.911967] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.916024] hub 2-0:1.0: USB hub found
[ 4.916086] hub 2-0:1.0: 2 ports detected
[ 4.939385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.953465] ehci-pci: EHCI PCI platform driver
[ 4.953661] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 4.953723] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 4.953796] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.953875] ehci-pci 0000:00:12.2: debug port 1
[ 4.953964] ehci-pci 0000:00:12.2: irq 17, io mem 0xfd309000
[ 4.968031] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 4.968317] hub 3-0:1.0: USB hub found
[ 4.968383] hub 3-0:1.0: 5 ports detected
[ 4.968702] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 4.968760] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 4.968830] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.968907] ehci-pci 0000:00:13.2: debug port 1
[ 4.968983] ehci-pci 0000:00:13.2: irq 17, io mem 0xfd307000
[ 4.988027] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.988286] hub 4-0:1.0: USB hub found
[ 4.988352] hub 4-0:1.0: 5 ports detected
[ 4.988682] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 4.988740] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 4.988810] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.988915] ehci-pci 0000:00:16.2: debug port 1
[ 4.988990] ehci-pci 0000:00:16.2: irq 17, io mem 0xfd304000
[ 5.008079] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 5.008346] hub 5-0:1.0: USB hub found
[ 5.008435] hub 5-0:1.0: 4 ports detected
[ 5.022723] r8169 0000:04:00.0 eth6: renamed from eth0
[ 5.044103] udev[159]: renamed network interface eth0 to eth6
[ 5.113405] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.139573] ohci-pci: OHCI PCI platform driver
[ 5.139761] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 5.139821] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 5.139919] ohci-pci 0000:00:12.0: irq 18, io mem 0xfd30a000
[ 5.204170] hub 6-0:1.0: USB hub found
[ 5.204234] hub 6-0:1.0: 5 ports detected
[ 5.204530] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 5.204589] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 5.204676] ohci-pci 0000:00:13.0: irq 18, io mem 0xfd308000
[ 5.224014] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 5.224094] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.224165] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.224235] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.224292] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 5.224348] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.224432] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 5.224489] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 5.224546] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 5.239380] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input2
[ 5.240089] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 5.240217] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 5.240377] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 5.240780] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 5.240910] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 5.241063] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 5.241463] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 5.268246] hub 7-0:1.0: USB hub found
[ 5.268309] hub 7-0:1.0: 5 ports detected
[ 5.268661] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 5.268721] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 5.268814] ohci-pci 0000:00:14.5: irq 18, io mem 0xfd306000
[ 5.332236] hub 8-0:1.0: USB hub found
[ 5.332298] hub 8-0:1.0: 2 ports detected
[ 5.332554] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 5.332613] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 5.332700] ohci-pci 0000:00:16.0: irq 18, io mem 0xfd305000
[ 5.336494] pktcdvd: pktcdvd0: writer mapped to sr0
[ 5.396220] hub 9-0:1.0: USB hub found
[ 5.396281] hub 9-0:1.0: 4 ports detected
[ 5.530241] Linux agpgart interface v0.103
[ 5.579958] kvm: Nested Virtualization enabled
[ 5.580021] kvm: Nested Paging enabled
[ 5.616096] usb 6-2: new full-speed USB device number 2 using ohci-pci
[ 5.650412] cryptd: max_cpu_qlen set to 1000
[ 5.958762] AVX version of gcm_enc/dec engaged.
[ 5.958818] AES CTR mode by8 optimization enabled
[ 6.077885] Bluetooth: Core ver 2.22
[ 6.077956] NET: Registered protocol family 31
[ 6.078011] Bluetooth: HCI device and connection manager initialized
[ 6.078073] Bluetooth: HCI socket layer initialized
[ 6.078138] Bluetooth: L2CAP socket layer initialized
[ 6.078198] Bluetooth: SCO socket layer initialized
[ 6.180280] usbcore: registered new interface driver btusb
[ 6.367446] MXM: GUID detected in BIOS
[ 6.367707] nouveau 0000:01:00.0: NVIDIA G92 (092300a2)
[ 6.367794] nouveau 0000:01:00.0: pci: MSI enabled
[ 6.412104] usb 6-3: new low-speed USB device number 3 using ohci-pci
[ 6.477094] nouveau 0000:01:00.0: bios: version 62.92.1f.00.09
[ 6.497412] nouveau 0000:01:00.0: pci: pcie max speed: 5.0GT/s
[ 6.497514] nouveau 0000:01:00.0: fb: 384 MiB GDDR3
[ 6.558848] [TTM] Zone kernel: Available graphics memory: 6114262 kiB
[ 6.558914] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 6.558970] [TTM] Initializing pool allocator
[ 6.559025] [TTM] Initializing DMA pool allocator
[ 6.559091] nouveau 0000:01:00.0: DRM: VRAM: 384 MiB
[ 6.559145] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 6.559201] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 6.559256] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 6.559310] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000028
[ 6.559366] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00000030
[ 6.559422] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011312 00020010
[ 6.559478] nouveau 0000:01:00.0: DRM: DCB outp 03: 010223f1 00c0c083
[ 6.559534] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 6.559588] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002130
[ 6.559642] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000210
[ 6.559725] nouveau 0000:01:00.0: DRM: DCB conn 03: 00000211
[ 6.559779] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000213
[ 6.559834] nouveau 0000:01:00.0: DRM: DCB conn 05: 00000362
[ 6.562741] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19
[ 6.562799] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing
[ 6.562888] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.562944] [drm] Driver supports precise vblank timestamp query.
[ 6.564627] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[ 6.595404] nouveau 0000:01:00.0: DRM: allocated 1440x900 fb: 0x50000, bo (____ptrval____)
[ 6.596074] fbcon: nouveaufb (fb0) is primary device
[ 6.695593] Console: switching to colour frame buffer device 180x56
[ 6.698870] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 6.708117] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 6.716855] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.760156] usbcore: registered new interface driver usbhid
[ 6.760171] usbhid: USB HID core driver
[ 6.864648] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.0/0003:046D:C077.0001/input/input10
[ 6.864728] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 6.891870] mousedev: PS/2 mouse device common for all mice
[ 7.172089] usb 6-4: new low-speed USB device number 4 using ohci-pci
[ 7.375481] input: SONiX USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-4/6-4:1.0/0003:0C45:760B.0002/input/input11
[ 7.432323] hid-generic 0003:0C45:760B.0002: input,hidraw1: USB HID v1.11 Keyboard [SONiX USB Keyboard] on usb-0000:00:12.0-4/input0
[ 7.436494] input: SONiX USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb6/6-4/6-4:1.1/0003:0C45:760B.0003/input/input12
[ 7.496349] input: SONiX USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb6/6-4/6-4:1.1/0003:0C45:760B.0003/input/input13
[ 7.496493] hid-generic 0003:0C45:760B.0003: input,hidraw2: USB HID v1.11 Device [SONiX USB Keyboard] on usb-0000:00:12.0-4/input1
[ 8.120994] Adding 1172476k swap on /dev/sda1. Priority:-2 extents:1 across:1172476k FS
[ 8.123148] EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
[ 8.136517] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 9.144897] f71882fg: Found f71889a chip at 0x480, revision 49
[ 9.145249] f71882fg f71882fg.1152: Fan: 1 is in duty-cycle mode
[ 9.145926] f71882fg f71882fg.1152: Fan: 2 is in duty-cycle mode
[ 9.146995] f71882fg f71882fg.1152: Fan: 3 is in duty-cycle mode
[ 9.148060] f71882fg f71882fg.1152: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 9.189733] lp: driver loaded but no devices found
[ 9.336156] SGI XFS with ACLs, security attributes, no debug enabled
[ 9.370915] XFS (sda3): Mounting V4 Filesystem
[ 9.564304] XFS (sda3): Ending clean mount
[ 9.806176] random: dd: uninitialized urandom read (4096 bytes read)
[ 11.601436] r8169 0000:04:00.0 eth6: link down
[ 13.438652] r8169 0000:04:00.0 eth6: link up
[ 13.493506] random: dhcpcd: uninitialized urandom read (120 bytes read)
[ 19.863725] NET: Registered protocol family 10
[ 19.864365] Segment Routing with IPv6
[ 19.864819] random: cupsd: uninitialized urandom read (4096 bytes read)
[ 20.771995] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 20.898330] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 21.485879] random: hald: uninitialized urandom read (10 bytes read)
[ 21.485966] random: hald: uninitialized urandom read (12 bytes read)
[ 25.150426] microcode: CPU0: new patch_level=0x06000852
[ 25.165154] microcode: CPU2: new patch_level=0x06000852
[ 25.165204] x86/CPU: CPU features have changed after loading microcode, but might not take effect.
[ 25.165211] x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.
[ 25.389708] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 25.389713] Bluetooth: HIDP socket layer initialized
[ 25.553501] Bluetooth: RFCOMM TTY layer initialized
[ 25.553508] Bluetooth: RFCOMM socket layer initialized
[ 25.553512] Bluetooth: RFCOMM ver 1.11
[ 25.561739] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.561740] Bluetooth: BNEP filters: protocol multicast
[ 25.561744] Bluetooth: BNEP socket layer initialized
[ 25.633491] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 27.961118] random: crng init done
[ 27.961123] random: 2 urandom warning(s) missed due to ratelimiting
[ 41.761935] start_kdeinit (1026): /proc/1026/oom_adj is deprecated, please use /proc/1026/oom_score_adj instead.
[ 155.413067] PM: suspend entry (deep)
[ 155.413072] PM: Syncing filesystems ... done.
[ 155.585639] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 155.587297] OOM killer disabled.
[ 155.587298] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 155.588140] Suspending console(s) (use no_console_suspend to debug)
[ 155.589284] serial 00:03: disabled
[ 155.604577] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 155.604654] sd 0:0:0:0: [sda] Stopping disk
[ 156.880770] ACPI: Preparing to enter system sleep state S3
[ 156.881768] PM: Saving platform NVS memory
[ 156.881791] Disabling non-boot CPUs ...
[ 156.898533] smpboot: CPU 1 is now offline
[ 156.921557] smpboot: CPU 2 is now offline
[ 156.945488] smpboot: CPU 3 is now offline
[ 156.947120] ACPI: Low-level resume complete
[ 156.947147] PM: Restoring platform NVS memory
[ 157.028351] LVT offset 0 assigned for vector 0x400
[ 157.033816] microcode: CPU0: new patch_level=0x06000852
[ 157.033850] Enabling non-boot CPUs ...
[ 157.033875] x86: Booting SMP configuration:
[ 157.033875] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 157.036289] TSC synchronization [CPU#0 -> CPU#1]:
[ 157.036290] Measured 2419788018 cycles TSC warp between CPUs, turning off TSC clock.
[ 157.036295] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 157.036308] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 157.036309] sched_clock: Marking unstable (156953585938, -21861)<-(157117755281, -81447816)
[ 157.673332] cache: parent cpu1 should not be sleeping
[ 157.673410] microcode: CPU1: patch_level=0x06000852
[ 157.036725] CPU1 is up
[ 157.590766] clocksource: Switched to clocksource hpet
[ 157.590766] smpboot: Booting Node 0 Processor 2 APIC 0x12
[ 157.590778] cache: parent cpu2 should not be sleeping
[ 157.590778] microcode: CPU2: patch_level=0x06000822
[ 157.590778] microcode: CPU2: new patch_level=0x06000852
[ 157.590778] CPU2 is up
[ 157.590778] smpboot: Booting Node 0 Processor 3 APIC 0x13
[ 157.590778] cache: parent cpu3 should not be sleeping
[ 157.590778] microcode: CPU3: patch_level=0x06000852
[ 157.590778] CPU3 is up
[ 157.590778] ACPI: Waking up from system sleep state S3
[ 157.590778] usb usb1: root hub lost power or was reset
[ 157.590778] usb usb2: root hub lost power or was reset
[ 157.590778] serial 00:03: activated
[ 157.590778] sd 0:0:0:0: [sda] Starting disk
[ 157.590778] r8169 0000:04:00.0 eth6: link down
[ 157.590778] ata5: SATA link down (SStatus 0 SControl 300)
[ 157.590778] ata6: SATA link down (SStatus 0 SControl 300)
[ 157.590778] ata4: SATA link down (SStatus 0 SControl 300)
[ 157.590778] ata3: SATA link down (SStatus 0 SControl 300)
[ 157.590778] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 157.590778] ata2.00: configured for UDMA/133
[ 157.590778] usb 6-4: reset low-speed USB device number 4 using ohci-pci
[ 158.136092] usb 6-3: reset low-speed USB device number 3 using ohci-pci
[ 158.616134] usb 6-2: reset full-speed USB device number 2 using ohci-pci
[ 158.805151] usb 6-2: device descriptor read/all, error -62
[ 158.933983] r8169 0000:04:00.0 eth6: link up
[ 158.996080] usb 6-2: reset full-speed USB device number 2 using ohci-pci
[ 159.187686] OOM killer enabled.
[ 159.187687] Restarting tasks ... done.
[ 159.189830] PM: suspend exit
[ 163.680093] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 163.688373] ata1.00: configured for UDMA/133
[ 195.388553] PM: suspend entry (deep)
[ 195.388556] PM: Syncing filesystems ... done.
[ 195.515383] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 195.517241] OOM killer disabled.
[ 195.517242] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 195.518599] Suspending console(s) (use no_console_suspend to debug)
[ 195.520222] serial 00:03: disabled
[ 195.536194] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 195.536313] sd 0:0:0:0: [sda] Stopping disk
[ 196.589006] ACPI: Preparing to enter system sleep state S3
[ 196.589960] PM: Saving platform NVS memory
[ 196.589984] Disabling non-boot CPUs ...
[ 196.606513] smpboot: CPU 1 is now offline
[ 196.629717] smpboot: CPU 2 is now offline
[ 196.653640] smpboot: CPU 3 is now offline
[ 196.653676] ACPI: Low-level resume complete
[ 196.653676] PM: Restoring platform NVS memory
[ 196.653676] LVT offset 0 assigned for vector 0x400
[ 196.653676] microcode: CPU0: new patch_level=0x06000852
[ 196.659239] Enabling non-boot CPUs ...
[ 196.659263] x86: Booting SMP configuration:
[ 196.659264] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 196.659924] cache: parent cpu1 should not be sleeping
[ 196.660017] microcode: CPU1: patch_level=0x06000852
[ 196.660104] CPU1 is up
[ 196.660119] smpboot: Booting Node 0 Processor 2 APIC 0x12
[ 196.660735] cache: parent cpu2 should not be sleeping
[ 196.660820] microcode: CPU2: patch_level=0x06000822
[ 196.664673] microcode: CPU2: new patch_level=0x06000852
[ 196.666284] CPU2 is up
[ 196.666298] smpboot: Booting Node 0 Processor 3 APIC 0x13
[ 196.666969] cache: parent cpu3 should not be sleeping
[ 196.667047] microcode: CPU3: patch_level=0x06000852
[ 196.667161] CPU3 is up
[ 196.670044] ACPI: Waking up from system sleep state S3
[ 196.709266] usb usb1: root hub lost power or was reset
[ 196.709268] usb usb2: root hub lost power or was reset
[ 196.709960] serial 00:03: activated
[ 196.724795] sd 0:0:0:0: [sda] Starting disk
[ 196.865682] r8169 0000:04:00.0 eth6: link down
[ 197.023467] ata3: SATA link down (SStatus 0 SControl 300)
[ 197.027490] ata6: SATA link down (SStatus 0 SControl 300)
[ 197.031411] ata5: SATA link down (SStatus 0 SControl 300)
[ 197.031540] ata4: SATA link down (SStatus 0 SControl 300)
[ 197.052078] usb 6-2: reset full-speed USB device number 2 using ohci-pci
[ 197.184093] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 197.201108] ata2.00: configured for UDMA/133
[ 197.241194] usb 6-2: device descriptor read/all, error -62
[ 197.536102] usb 6-4: reset low-speed USB device number 4 using ohci-pci
[ 198.156092] usb 6-3: reset low-speed USB device number 3 using ohci-pci
[ 198.636076] usb 6-2: reset full-speed USB device number 2 using ohci-pci
[ 198.673536] r8169 0000:04:00.0 eth6: link up
[ 198.827794] OOM killer enabled.
[ 198.827794] Restarting tasks ... done.
[ 198.828111] PM: suspend exit
[ 202.964084] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 202.972470] ata1.00: configured for UDMA/133
[ 215.841002] PM: suspend entry (deep)
[ 215.841006] PM: Syncing filesystems ... done.
[ 216.010885] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 216.012715] OOM killer disabled.
[ 216.012717] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 216.014089] Suspending console(s) (use no_console_suspend to debug)
[ 216.015472] serial 00:03: disabled
[ 216.040176] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 216.040275] sd 0:0:0:0: [sda] Stopping disk
[ 217.069053] ACPI: Preparing to enter system sleep state S3
[ 217.070714] PM: Saving platform NVS memory
[ 217.070748] Disabling non-boot CPUs ...
[ 217.086999] smpboot: CPU 1 is now offline
[ 217.114895] smpboot: CPU 2 is now offline
[ 217.137668] smpboot: CPU 3 is now offline
[ 217.137789] ACPI: Low-level resume complete
[ 217.137789] PM: Restoring platform NVS memory
[ 217.137789] LVT offset 0 assigned for vector 0x400
[ 217.137789] microcode: CPU0: new patch_level=0x06000852
[ 217.143338] Enabling non-boot CPUs ...
[ 217.143362] x86: Booting SMP configuration:
[ 217.143363] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 217.144052] cache: parent cpu1 should not be sleeping
[ 217.144133] microcode: CPU1: patch_level=0x06000852
[ 217.144216] CPU1 is up
[ 217.144232] smpboot: Booting Node 0 Processor 2 APIC 0x12
[ 217.144848] cache: parent cpu2 should not be sleeping
[ 217.144929] microcode: CPU2: patch_level=0x06000822
[ 217.148787] microcode: CPU2: new patch_level=0x06000852
[ 217.150399] CPU2 is up
[ 217.150413] smpboot: Booting Node 0 Processor 3 APIC 0x13
[ 217.151095] cache: parent cpu3 should not be sleeping
[ 217.151173] microcode: CPU3: patch_level=0x06000852
[ 217.151289] CPU3 is up
[ 217.154163] ACPI: Waking up from system sleep state S3
[ 217.193349] serial 00:03: activated
[ 217.196118] usb usb1: root hub lost power or was reset
[ 217.196123] usb usb2: root hub lost power or was reset
[ 217.198164] sd 0:0:0:0: [sda] Starting disk
[ 217.329696] r8169 0000:04:00.0 eth6: link down
[ 217.511413] ata6: SATA link down (SStatus 0 SControl 300)
[ 217.511477] ata4: SATA link down (SStatus 0 SControl 300)
[ 217.511523] ata3: SATA link down (SStatus 0 SControl 300)
[ 217.511553] ata5: SATA link down (SStatus 0 SControl 300)
[ 217.536077] usb 6-2: reset full-speed USB device number 2 using ohci-pci
[ 217.672081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 217.689119] ata2.00: configured for UDMA/133
[ 217.725103] usb 6-2: device descriptor read/all, error -62
[ 218.048098] usb 6-4: reset low-speed USB device number 4 using ohci-pci
[ 218.668097] usb 6-3: reset low-speed USB device number 3 using ohci-pci
[ 219.115488] r8169 0000:04:00.0 eth6: link up
[ 219.148082] usb 6-2: reset full-speed USB device number 2 using ohci-pci
[ 219.339703] OOM killer enabled.
[ 219.339703] Restarting tasks ... done.
[ 219.342072] PM: suspend exit
[ 223.808087] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 223.816424] ata1.00: configured for UDMA/133
\
 
 \ /
  Last update: 2018-06-13 09:55    [W:0.094 / U:0.312 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site