lkml.org 
[lkml]   [2018]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/19] mmc: mmci: add variant property to define dpsm bit
Date
From: Ludovic Barre <ludovic.barre@st.com>

This patch adds datactrl variant property to define
dpsm enable bit. Needed to support the STM32 variant
(STM32 has no dpsm enable bit).

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
drivers/mmc/host/mmci.c | 15 ++++++++++++---
drivers/mmc/host/mmci.h | 2 ++
2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 52562fc..1f44c61 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -57,6 +57,7 @@ static struct variant_data variant_arm = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 16,
.datactrl_blocksz = 11,
+ .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.reversed_irq_handling = true,
@@ -75,6 +76,7 @@ static struct variant_data variant_arm_extended_fifo = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 16,
.datactrl_blocksz = 11,
+ .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
@@ -93,6 +95,7 @@ static struct variant_data variant_arm_extended_fifo_hwfc = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 16,
.datactrl_blocksz = 11,
+ .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
@@ -112,6 +115,7 @@ static struct variant_data variant_u300 = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 16,
.datactrl_blocksz = 11,
+ .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.pwrreg_powerup = MCI_PWR_ON,
@@ -136,6 +140,7 @@ static struct variant_data variant_nomadik = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 24,
.datactrl_blocksz = 11,
+ .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -163,6 +168,7 @@ static struct variant_data variant_ux500 = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 24,
.datactrl_blocksz = 11,
+ .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -195,6 +201,7 @@ static struct variant_data variant_ux500v2 = {
.datactrl_mask_ddrmode = MCI_DPSM_ST_DDRMODE,
.datalength_bits = 24,
.datactrl_blocksz = 11,
+ .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -227,6 +234,7 @@ static struct variant_data variant_stm32 = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 24,
.datactrl_blocksz = 11,
+ .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -253,6 +261,7 @@ static struct variant_data variant_qcom = {
.blksz_datactrl4 = true,
.datalength_bits = 24,
.datactrl_blocksz = 11,
+ .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 208000000,
.explicit_mclk_control = true,
@@ -564,11 +573,11 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
BUG_ON(1 << blksz_bits != data->blksz);

if (variant->blksz_datactrl16)
- datactrl = MCI_DPSM_ENABLE | (data->blksz << 16);
+ datactrl = variant->datactrl_dpsm_enable | (data->blksz << 16);
else if (variant->blksz_datactrl4)
- datactrl = MCI_DPSM_ENABLE | (data->blksz << 4);
+ datactrl = variant->datactrl_dpsm_enable | (data->blksz << 4);
else
- datactrl = MCI_DPSM_ENABLE | blksz_bits << 4;
+ datactrl = variant->datactrl_dpsm_enable | blksz_bits << 4;

if (data->flags & MMC_DATA_READ)
datactrl |= MCI_DPSM_DIRECTION;
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index e173305..a2bf8bc 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -258,6 +258,7 @@ struct mmci_host;
* register
* @datactrl_mask_sdio: SDIO enable mask in datactrl register
* @datactrl_blksz: block size in power of two
+ * @datactrl_dpsm_enable: enable value for DPSM
* @pwrreg_powerup: power up value for MMCIPOWER register
* @f_max: maximum clk frequency supported by the controller.
* @signal_direction: input/out direction of bus signals can be indicated
@@ -297,6 +298,7 @@ struct variant_data {
unsigned int datactrl_mask_ddrmode;
unsigned int datactrl_mask_sdio;
unsigned int datactrl_blocksz;
+ unsigned int datactrl_dpsm_enable;
bool st_sdio;
bool st_clkdiv;
bool blksz_datactrl16;
--
2.7.4
\
 
 \ /
  Last update: 2018-06-12 15:20    [W:0.084 / U:8.072 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site