lkml.org 
[lkml]   [2018]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] arm64: dts: qcom: sdm845: Add I2C, SPI, and UART9 nodes
On Thu 07 Jun 13:46 PDT 2018, Douglas Anderson wrote:

> This adds nodes to SDM845-dtsi for all the I2C ports, all the SPI
> ports, and UART9. Note that I2C / SPI / UART are a bit strange on
> sdm845 because each "serial engine" has 4 pins associated with it and
> depending on which firmware has been loaded into the serial engine
> (loaded by the BIOS) the serial engine can behave like an I2C port, a
> SPI port, or a UART. As per the landed bindings that means that we
> need to create one node for each possible mode that the port could be
> in. With 16 serial engines that means 16 x 3 = 48 nodes.
>
> We get away with only creating 33 nodes for now because it seems very
> likely that SDM845-based boards will actually all use the same UART
> (UART 9) for debug purposes. While another UART could be used for
> something like Bluetooth communication we can cross that path when we
> come to it. Some documentation that I saw implied that using a UART
> for "high speed" communications actually needs yet another different
> serial engine firmware anyway.
>
> Note that quick measurements adding all these nodes adds ~10k of extra
> space per dtb that they're included with. If this becomes a problem
> we may need to think of a different way to structure this so that
> boards only get the nodes they need (or figure out how to get dtc to
> strip 'disabled' nodes). For now it seems OK.
>
> These nodes were programmatically generated with a fairly dumb python
> script. See http://crosreview.com/1091631 for the source.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 1013 ++++++++++++++++++++++++++
> 1 file changed, 1013 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index cdaabeb3c995..2dc5c7dcc9aa 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -5,6 +5,7 @@
> * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> */
>
> +#include <dt-bindings/clock/qcom,gcc-sdm845.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
>
> / {
> @@ -13,6 +14,41 @@
> #address-cells = <2>;
> #size-cells = <2>;
>
> + aliases {
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + i2c2 = &i2c2;
> + i2c3 = &i2c3;
> + i2c4 = &i2c4;
> + i2c5 = &i2c5;
> + i2c6 = &i2c6;
> + i2c7 = &i2c7;
> + i2c8 = &i2c8;
> + i2c9 = &i2c9;
> + i2c10 = &i2c10;
> + i2c11 = &i2c11;
> + i2c12 = &i2c12;
> + i2c13 = &i2c13;
> + i2c14 = &i2c14;
> + i2c15 = &i2c15;
> + spi0 = &spi0;
> + spi1 = &spi1;
> + spi2 = &spi2;
> + spi3 = &spi3;
> + spi4 = &spi4;
> + spi5 = &spi5;
> + spi6 = &spi6;
> + spi7 = &spi7;
> + spi8 = &spi8;
> + spi9 = &spi9;
> + spi10 = &spi10;
> + spi11 = &spi11;
> + spi12 = &spi12;
> + spi13 = &spi13;
> + spi14 = &spi14;
> + spi15 = &spi15;
> + };
> +
> chosen { };
>
> memory@80000000 {
> @@ -206,6 +242,489 @@
> #power-domain-cells = <1>;
> };
>
> + qupv3_id_0: geniqup@8c0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x8c0000 0x6000>;
> + clock-names = "m-ahb", "s-ahb";
> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + i2c0: i2c@880000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x880000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c0_default>;
> + pinctrl-1 = <&qup_i2c0_sleep>;
> + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi0: spi@880000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x880000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi0_default>;
> + pinctrl-1 = <&qup_spi0_sleep>;
> + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@884000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x884000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c1_default>;
> + pinctrl-1 = <&qup_i2c1_sleep>;
> + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi1: spi@884000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x884000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi1_default>;
> + pinctrl-1 = <&qup_spi1_sleep>;
> + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@888000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x888000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c2_default>;
> + pinctrl-1 = <&qup_i2c2_sleep>;
> + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi2: spi@888000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x888000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi2_default>;
> + pinctrl-1 = <&qup_spi2_sleep>;
> + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@88c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x88c000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c3_default>;
> + pinctrl-1 = <&qup_i2c3_sleep>;
> + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi3: spi@88c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x88c000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi3_default>;
> + pinctrl-1 = <&qup_spi3_sleep>;
> + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@890000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x890000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c4_default>;
> + pinctrl-1 = <&qup_i2c4_sleep>;
> + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi4: spi@890000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x890000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi4_default>;
> + pinctrl-1 = <&qup_spi4_sleep>;
> + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c5: i2c@894000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x894000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c5_default>;
> + pinctrl-1 = <&qup_i2c5_sleep>;
> + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi5: spi@894000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x894000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi5_default>;
> + pinctrl-1 = <&qup_spi5_sleep>;
> + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c6: i2c@898000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x898000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c6_default>;
> + pinctrl-1 = <&qup_i2c6_sleep>;
> + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi6: spi@898000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x898000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi6_default>;
> + pinctrl-1 = <&qup_spi6_sleep>;
> + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c7: i2c@89c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x89c000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c7_default>;
> + pinctrl-1 = <&qup_i2c7_sleep>;
> + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi7: spi@89c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x89c000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi7_default>;
> + pinctrl-1 = <&qup_spi7_sleep>;
> + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + };
> +
> + qupv3_id_1: geniqup@ac0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0xac0000 0x6000>;
> + clock-names = "m-ahb", "s-ahb";
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + status = "disabled";
> +
> + i2c8: i2c@a80000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0xa80000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c8_default>;
> + pinctrl-1 = <&qup_i2c8_sleep>;
> + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi8: spi@a80000 {
> + compatible = "qcom,geni-spi";
> + reg = <0xa80000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi8_default>;
> + pinctrl-1 = <&qup_spi8_sleep>;
> + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c9: i2c@a84000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0xa84000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c9_default>;
> + pinctrl-1 = <&qup_i2c9_sleep>;
> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi9: spi@a84000 {
> + compatible = "qcom,geni-spi";
> + reg = <0xa84000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi9_default>;
> + pinctrl-1 = <&qup_spi9_sleep>;
> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + uart9: serial@a84000 {
> + compatible = "qcom,geni-debug-uart";
> + reg = <0xa84000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_uart9_default>;
> + pinctrl-1 = <&qup_uart9_sleep>;
> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + i2c10: i2c@a88000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0xa88000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c10_default>;
> + pinctrl-1 = <&qup_i2c10_sleep>;
> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi10: spi@a88000 {
> + compatible = "qcom,geni-spi";
> + reg = <0xa88000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi10_default>;
> + pinctrl-1 = <&qup_spi10_sleep>;
> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c11: i2c@a8c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0xa8c000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c11_default>;
> + pinctrl-1 = <&qup_i2c11_sleep>;
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi11: spi@a8c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0xa8c000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi11_default>;
> + pinctrl-1 = <&qup_spi11_sleep>;
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c12: i2c@a90000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0xa90000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c12_default>;
> + pinctrl-1 = <&qup_i2c12_sleep>;
> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi12: spi@a90000 {
> + compatible = "qcom,geni-spi";
> + reg = <0xa90000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi12_default>;
> + pinctrl-1 = <&qup_spi12_sleep>;
> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c13: i2c@a94000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0xa94000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c13_default>;
> + pinctrl-1 = <&qup_i2c13_sleep>;
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi13: spi@a94000 {
> + compatible = "qcom,geni-spi";
> + reg = <0xa94000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi13_default>;
> + pinctrl-1 = <&qup_spi13_sleep>;
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c14: i2c@a98000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0xa98000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c14_default>;
> + pinctrl-1 = <&qup_i2c14_sleep>;
> + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi14: spi@a98000 {
> + compatible = "qcom,geni-spi";
> + reg = <0xa98000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi14_default>;
> + pinctrl-1 = <&qup_spi14_sleep>;
> + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c15: i2c@a9c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0xa9c000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_i2c15_default>;
> + pinctrl-1 = <&qup_i2c15_sleep>;
> + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi15: spi@a9c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0xa9c000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qup_spi15_default>;
> + pinctrl-1 = <&qup_spi15_sleep>;
> + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + };
> +
> tcsr_mutex_regs: syscon@1f40000 {
> compatible = "syscon";
> reg = <0x1f40000 0x40000>;
> @@ -219,6 +738,500 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> +
> + qup_i2c0_default: qup-i2c0-default {
> + pinmux {
> + pins = "gpio0", "gpio1";
> + function = "qup0";
> + };
> + };
> +
> + qup_i2c0_sleep: qup-i2c0-sleep {
> + pinmux {
> + pins = "gpio0", "gpio1";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c1_default: qup-i2c1-default {
> + pinmux {
> + pins = "gpio17", "gpio18";
> + function = "qup1";
> + };
> + };
> +
> + qup_i2c1_sleep: qup-i2c1-sleep {
> + pinmux {
> + pins = "gpio17", "gpio18";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c2_default: qup-i2c2-default {
> + pinmux {
> + pins = "gpio27", "gpio28";
> + function = "qup2";
> + };
> + };
> +
> + qup_i2c2_sleep: qup-i2c2-sleep {
> + pinmux {
> + pins = "gpio27", "gpio28";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c3_default: qup-i2c3-default {
> + pinmux {
> + pins = "gpio41", "gpio42";
> + function = "qup3";
> + };
> + };
> +
> + qup_i2c3_sleep: qup-i2c3-sleep {
> + pinmux {
> + pins = "gpio41", "gpio42";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c4_default: qup-i2c4-default {
> + pinmux {
> + pins = "gpio89", "gpio90";
> + function = "qup4";
> + };
> + };
> +
> + qup_i2c4_sleep: qup-i2c4-sleep {
> + pinmux {
> + pins = "gpio89", "gpio90";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c5_default: qup-i2c5-default {
> + pinmux {
> + pins = "gpio85", "gpio86";
> + function = "qup5";
> + };
> + };
> +
> + qup_i2c5_sleep: qup-i2c5-sleep {
> + pinmux {
> + pins = "gpio85", "gpio86";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c6_default: qup-i2c6-default {
> + pinmux {
> + pins = "gpio45", "gpio46";
> + function = "qup6";
> + };
> + };
> +
> + qup_i2c6_sleep: qup-i2c6-sleep {
> + pinmux {
> + pins = "gpio45", "gpio46";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c7_default: qup-i2c7-default {
> + pinmux {
> + pins = "gpio93", "gpio94";
> + function = "qup7";
> + };
> + };
> +
> + qup_i2c7_sleep: qup-i2c7-sleep {
> + pinmux {
> + pins = "gpio93", "gpio94";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c8_default: qup-i2c8-default {
> + pinmux {
> + pins = "gpio65", "gpio66";
> + function = "qup8";
> + };
> + };
> +
> + qup_i2c8_sleep: qup-i2c8-sleep {
> + pinmux {
> + pins = "gpio65", "gpio66";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c9_default: qup-i2c9-default {
> + pinmux {
> + pins = "gpio6", "gpio7";
> + function = "qup9";
> + };
> + };
> +
> + qup_i2c9_sleep: qup-i2c9-sleep {
> + pinmux {
> + pins = "gpio6", "gpio7";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c10_default: qup-i2c10-default {
> + pinmux {
> + pins = "gpio55", "gpio56";
> + function = "qup10";
> + };
> + };
> +
> + qup_i2c10_sleep: qup-i2c10-sleep {
> + pinmux {
> + pins = "gpio55", "gpio56";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c11_default: qup-i2c11-default {
> + pinmux {
> + pins = "gpio31", "gpio32";
> + function = "qup11";
> + };
> + };
> +
> + qup_i2c11_sleep: qup-i2c11-sleep {
> + pinmux {
> + pins = "gpio31", "gpio32";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c12_default: qup-i2c12-default {
> + pinmux {
> + pins = "gpio49", "gpio50";
> + function = "qup12";
> + };
> + };
> +
> + qup_i2c12_sleep: qup-i2c12-sleep {
> + pinmux {
> + pins = "gpio49", "gpio50";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c13_default: qup-i2c13-default {
> + pinmux {
> + pins = "gpio105", "gpio106";
> + function = "qup13";
> + };
> + };
> +
> + qup_i2c13_sleep: qup-i2c13-sleep {
> + pinmux {
> + pins = "gpio105", "gpio106";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c14_default: qup-i2c14-default {
> + pinmux {
> + pins = "gpio33", "gpio34";
> + function = "qup14";
> + };
> + };
> +
> + qup_i2c14_sleep: qup-i2c14-sleep {
> + pinmux {
> + pins = "gpio33", "gpio34";
> + function = "gpio";
> + };
> + };
> +
> + qup_i2c15_default: qup-i2c15-default {
> + pinmux {
> + pins = "gpio81", "gpio82";
> + function = "qup15";
> + };
> + };
> +
> + qup_i2c15_sleep: qup-i2c15-sleep {
> + pinmux {
> + pins = "gpio81", "gpio82";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi0_default: qup-spi0-default {
> + pinmux {
> + pins = "gpio0", "gpio1",
> + "gpio2", "gpio3";
> + function = "qup0";
> + };
> + };
> +
> + qup_spi0_sleep: qup-spi0-sleep {
> + pinmux {
> + pins = "gpio0", "gpio1",
> + "gpio2", "gpio3";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi1_default: qup-spi1-default {
> + pinmux {
> + pins = "gpio17", "gpio18",
> + "gpio19", "gpio20";
> + function = "qup1";
> + };
> + };
> +
> + qup_spi1_sleep: qup-spi1-sleep {
> + pinmux {
> + pins = "gpio17", "gpio18",
> + "gpio19", "gpio20";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi2_default: qup-spi2-default {
> + pinmux {
> + pins = "gpio27", "gpio28",
> + "gpio29", "gpio30";
> + function = "qup2";
> + };
> + };
> +
> + qup_spi2_sleep: qup-spi2-sleep {
> + pinmux {
> + pins = "gpio27", "gpio28",
> + "gpio29", "gpio30";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi3_default: qup-spi3-default {
> + pinmux {
> + pins = "gpio41", "gpio42",
> + "gpio43", "gpio44";
> + function = "qup3";
> + };
> + };
> +
> + qup_spi3_sleep: qup-spi3-sleep {
> + pinmux {
> + pins = "gpio41", "gpio42",
> + "gpio43", "gpio44";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi4_default: qup-spi4-default {
> + pinmux {
> + pins = "gpio89", "gpio90",
> + "gpio91", "gpio92";
> + function = "qup4";
> + };
> + };
> +
> + qup_spi4_sleep: qup-spi4-sleep {
> + pinmux {
> + pins = "gpio89", "gpio90",
> + "gpio91", "gpio92";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi5_default: qup-spi5-default {
> + pinmux {
> + pins = "gpio85", "gpio86",
> + "gpio87", "gpio88";
> + function = "qup5";
> + };
> + };
> +
> + qup_spi5_sleep: qup-spi5-sleep {
> + pinmux {
> + pins = "gpio85", "gpio86",
> + "gpio87", "gpio88";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi6_default: qup-spi6-default {
> + pinmux {
> + pins = "gpio45", "gpio46",
> + "gpio47", "gpio48";
> + function = "qup6";
> + };
> + };
> +
> + qup_spi6_sleep: qup-spi6-sleep {
> + pinmux {
> + pins = "gpio45", "gpio46",
> + "gpio47", "gpio48";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi7_default: qup-spi7-default {
> + pinmux {
> + pins = "gpio93", "gpio94",
> + "gpio95", "gpio96";
> + function = "qup7";
> + };
> + };
> +
> + qup_spi7_sleep: qup-spi7-sleep {
> + pinmux {
> + pins = "gpio93", "gpio94",
> + "gpio95", "gpio96";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi8_default: qup-spi8-default {
> + pinmux {
> + pins = "gpio65", "gpio66",
> + "gpio67", "gpio68";
> + function = "qup8";
> + };
> + };
> +
> + qup_spi8_sleep: qup-spi8-sleep {
> + pinmux {
> + pins = "gpio65", "gpio66",
> + "gpio67", "gpio68";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi9_default: qup-spi9-default {
> + pinmux {
> + pins = "gpio6", "gpio7",
> + "gpio4", "gpio5";
> + function = "qup9";
> + };
> + };
> +
> + qup_spi9_sleep: qup-spi9-sleep {
> + pinmux {
> + pins = "gpio6", "gpio7",
> + "gpio4", "gpio5";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi10_default: qup-spi10-default {
> + pinmux {
> + pins = "gpio55", "gpio56",
> + "gpio53", "gpio54";
> + function = "qup10";
> + };
> + };
> +
> + qup_spi10_sleep: qup-spi10-sleep {
> + pinmux {
> + pins = "gpio55", "gpio56",
> + "gpio53", "gpio54";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi11_default: qup-spi11-default {
> + pinmux {
> + pins = "gpio31", "gpio32",
> + "gpio33", "gpio34";
> + function = "qup11";
> + };
> + };
> +
> + qup_spi11_sleep: qup-spi11-sleep {
> + pinmux {
> + pins = "gpio31", "gpio32",
> + "gpio33", "gpio34";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi12_default: qup-spi12-default {
> + pinmux {
> + pins = "gpio49", "gpio50",
> + "gpio51", "gpio52";
> + function = "qup12";
> + };
> + };
> +
> + qup_spi12_sleep: qup-spi12-sleep {
> + pinmux {
> + pins = "gpio49", "gpio50",
> + "gpio51", "gpio52";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi13_default: qup-spi13-default {
> + pinmux {
> + pins = "gpio105", "gpio106",
> + "gpio107", "gpio108";
> + function = "qup13";
> + };
> + };
> +
> + qup_spi13_sleep: qup-spi13-sleep {
> + pinmux {
> + pins = "gpio105", "gpio106",
> + "gpio107", "gpio108";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi14_default: qup-spi14-default {
> + pinmux {
> + pins = "gpio33", "gpio34",
> + "gpio31", "gpio32";
> + function = "qup14";
> + };
> + };
> +
> + qup_spi14_sleep: qup-spi14-sleep {
> + pinmux {
> + pins = "gpio33", "gpio34",
> + "gpio31", "gpio32";
> + function = "gpio";
> + };
> + };
> +
> + qup_spi15_default: qup-spi15-default {
> + pinmux {
> + pins = "gpio81", "gpio82",
> + "gpio83", "gpio84";
> + function = "qup15";
> + };
> + };
> +
> + qup_spi15_sleep: qup-spi15-sleep {
> + pinmux {
> + pins = "gpio81", "gpio82",
> + "gpio83", "gpio84";
> + function = "gpio";
> + };
> + };
> +
> + qup_uart9_default: qup-uart9-default {
> + pinmux {
> + pins = "gpio4", "gpio5";
> + function = "qup9";
> + };
> + };
> +
> + qup_uart9_sleep: qup-uart9-sleep {
> + pinmux {
> + pins = "gpio4", "gpio5";
> + function = "gpio";
> + };
> + };
> };
>
> spmi_bus: spmi@c440000 {
> --
> 2.17.1.1185.g55be947832-goog
>

\
 
 \ /
  Last update: 2018-06-12 07:00    [W:0.075 / U:5.544 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site