lkml.org 
[lkml]   [2018]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] mtd: rawnand: denali: add more clocks
On Tue, 12 Jun 2018 19:36:06 +0900
Masahiro Yamada <yamada.masahiro@socionext.com> wrote:

> Maybe, the commit title should be:
>
> mtd: rawnand: denali: add more clocks and improve setup_data_interface

Or you split that in 2 commits, one retrieving the new clks, and the
other one fixing/improving ->setup_data_interface().

>
>
>
> 2018-06-12 19:31 GMT+09:00 Masahiro Yamada <yamada.masahiro@socionext.com>:
> > According to the Denali User's Guide, this IP needs three clock inputs:
> >
> > - clk: controller core clock
> >
> > - clk_x: bus interface clock
> >
> > - ecc_clk: clock at which ECC circuitry is run
> >
> > Currently, denali_dt.c requires a single anonymous clock and its
> > frequency. However, the driver needs to get the frequency of "clk_x"
> > not "clk". This is confusing because people tend to assume the
> > anonymous clock means the core clock.
> >
> > Instead of the cheesy implementation, the clocks in the real hardware
> > should be represented in the driver code and the DT-binding.
> >
> > I improved the ->setup_data_interface() hook as well.
> >
> > The denali_setup_data_interface() needs the frequency of clk_x
> > and the ratio of clk_x / clk.
> >
> > The latter is currently hardcoded in the driver, like this:
> >
> > #define DENALI_CLK_X_MULT 6
> >
> > The IP datasheet specifies that clk_x / clk should be 4, 5, or 6.
> > I just chose 6 because it is the most defensive value, but it is not
> > very nice. By getting the clock rate of both "clk" and "clk_x", the
> > driver can compute the timing values more precisely.
> >
> > Adding new clocks would break the existing platforms. For the backward
> > compatibility, the driver still accepts the single clock just as before.
> > Also, ->clk_rate and ->clk_x_rate are set to hardcoded values if clk_x
> > is missing.
> >
> > It should work for all upstreamed platforms because Intel Moorestown,
> > Altera (Intel) SOCFPGA, Socionext UniPhier use the following clock
> > frequency:
> >
> > clk = 50 MHz
> > clk_x = ecc_clk = 200 MHz
> >
> > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> > ---
>
>

\
 
 \ /
  Last update: 2018-06-12 13:04    [W:0.048 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site