lkml.org 
[lkml]   [2018]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 0/7] Add powerdomain driver for corners on msm8996/sdm845
On 12 June 2018 at 06:40, Rajendra Nayak <rnayak@codeaurora.org> wrote:
> Changes in v3:
> * Bindings split into seperate patches
> * Bindings updated to remove duplicate OPP table phandles
> * DT headers defining macros for Power domain indexes and OPP levels
> * Optimisations to use rpmh_write_async() whereever applicable
> * Fixed up handling of ACTIVE_ONLY/WAKE_ONLY/SLEEP voting for RPMh
> * Fixed the vlvl to hlvl conversions in set_performance
> * Other minor fixes based on review of v2
> * TODO: This series does not handle the case where all VDD_MX votes
> should be higher than VDD_CX from APPs, as pointed out
> by David Collins in v2. This needs support at genpd to propogate performance
> state up the parents, if we model these as Parent/Child to handle the
> interdependency.
>
> Changes in v2:
> * added a powerdomain driver for sdm845 which supports communicating to RPMh
> * dropped the changes to sdhc driver to move over to using OPP
> as there is active discussion on using OPP as the interface vs
> handling all of it in clock drivers
> * Other minor binding updates based on review of v1
>
> With performance state support for genpd/OPP merged, this is an effort
> to model a powerdomain driver to communicate corner/level
> values for qualcomm platforms to RPM (Remote Power Manager) and RPMh.
>
> Rajendra Nayak (7):
> dt-bindings: power: Add qcom rpm power domain driver bindings
> soc: qcom: rpmpd: Add a Power domain driver to model corners
> soc: qcom: rpmpd: Add support for get/set performance state
> arm64: dts: msm8996: Add rpmpd device node
> dt-bindings: power: Add qcom rpmh power domain driver bindings
> soc: qcom: Add RPMh Power domain driver
> soc: qcom: rpmpd/rpmhpd: Add a max vote on all corners at init
>
> .../devicetree/bindings/power/qcom,rpmhpd.txt | 65 +++
> .../devicetree/bindings/power/qcom,rpmpd.txt | 49 ++
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 34 ++
> drivers/soc/qcom/Kconfig | 18 +
> drivers/soc/qcom/Makefile | 2 +
> drivers/soc/qcom/rpmhpd.c | 437 ++++++++++++++++++
> drivers/soc/qcom/rpmpd.c | 356 ++++++++++++++
> include/dt-bindings/power/qcom-rpmhpd.h | 31 ++
> include/dt-bindings/power/qcom-rpmpd.h | 16 +
> 9 files changed, 1008 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmhpd.txt
> create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmpd.txt
> create mode 100644 drivers/soc/qcom/rpmhpd.c
> create mode 100644 drivers/soc/qcom/rpmpd.c
> create mode 100644 include/dt-bindings/power/qcom-rpmhpd.h
> create mode 100644 include/dt-bindings/power/qcom-rpmpd.h
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>

For the series:

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe

\
 
 \ /
  Last update: 2018-06-12 09:48    [W:0.216 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site