lkml.org 
[lkml]   [2018]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v7 9/9] ARM: dts: at91: sama5d2: Add resistive touch device
    On Tue, 22 May 2018 10:52:39 +0300
    Eugen Hristev <eugen.hristev@microchip.com> wrote:

    > Add generic resistive touch device which is connected to ADC block
    > inside the SAMA5D2 SoC
    >
    > Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
    As with the previous patch, the driver side of things is working it's
    way through the IIO tree, but will be the next merge window, not the
    current one.

    Thanks,

    Jonathan

    > ---
    > Changes in v5:
    > - renamed touchscreen-threshold-pressure to touchscreen-min-pressure
    >
    > arch/arm/boot/dts/sama5d2.dtsi | 10 ++++++++++
    > 1 file changed, 10 insertions(+)
    >
    > diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
    > index f06ba99..a44f325 100644
    > --- a/arch/arm/boot/dts/sama5d2.dtsi
    > +++ b/arch/arm/boot/dts/sama5d2.dtsi
    > @@ -1442,6 +1442,16 @@
    > status = "disabled";
    > };
    >
    > + resistive_touch: resistive-touch {
    > + compatible = "resistive-adc-touch";
    > + io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
    > + <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
    > + <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
    > + io-channel-names = "x", "y", "pressure";
    > + touchscreen-min-pressure = <50000>;
    > + status = "disabled";
    > + };
    > +
    > pioA: pinctrl@fc038000 {
    > compatible = "atmel,sama5d2-pinctrl";
    > reg = <0xfc038000 0x600>;

    \
     
     \ /
      Last update: 2018-06-10 14:36    [W:4.038 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site