Messages in this thread | | | Date | Wed, 9 May 2018 16:12:25 +0200 | From | Boris Brezillon <> | Subject | Re: [PATCH v4 1/2] mtd: rawnand: fsl_ifc: fix FSL NAND driver to read all ONFI parameter pages |
| |
On Tue, 8 May 2018 14:19:53 -0700 Jane Wan <Jane.Wan@nokia.com> wrote:
> Per ONFI specification (Rev. 4.0), if the CRC of the first parameter page > read is not valid, the host should read redundant parameter page copies. > Fix FSL NAND driver to read the two redundant copies which are mandatory > in the specification. > > Signed-off-by: Jane Wan <Jane.Wan@nokia.com>
I'm gonna take this patch, but I'd like to make it clear: this is the last time I accept fixes touching fsl_ifc_cmdfunc() for bugs that could have been addressed by switching to ->exec_op() (note that I had a look at a freescale datasheet, and I'm now 100% sure this driver can be converted to ->exec_op()).
> --- > drivers/mtd/nand/raw/fsl_ifc_nand.c | 17 ++++++++++------- > 1 file changed, 10 insertions(+), 7 deletions(-) > > diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c > index 61aae02..98aac1f 100644 > --- a/drivers/mtd/nand/raw/fsl_ifc_nand.c > +++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c > @@ -342,9 +342,16 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, > > case NAND_CMD_READID: > case NAND_CMD_PARAM: { > + /* > + * For READID, read 8 bytes that are currently used. > + * For PARAM, read all 3 copies of 256-bytes pages. > + */ > + int len = 8; > int timing = IFC_FIR_OP_RB; > - if (command == NAND_CMD_PARAM) > + if (command == NAND_CMD_PARAM) { > timing = IFC_FIR_OP_RBCD; > + len = 256 * 3; > + } > > ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | > (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | > @@ -354,12 +361,8 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, > &ifc->ifc_nand.nand_fcr0); > ifc_out32(column, &ifc->ifc_nand.row3); > > - /* > - * although currently it's 8 bytes for READID, we always read > - * the maximum 256 bytes(for PARAM) > - */ > - ifc_out32(256, &ifc->ifc_nand.nand_fbcr); > - ifc_nand_ctrl->read_bytes = 256; > + ifc_out32(len, &ifc->ifc_nand.nand_fbcr); > + ifc_nand_ctrl->read_bytes = len; > > set_addr(mtd, 0, 0, 0); > fsl_ifc_run_command(mtd);
| |