lkml.org 
[lkml]   [2018]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] net: phy: DP83TC811: Introduce support for the DP83TC811 phy
From
Date
Andrew

On 05/09/2018 08:58 AM, Andrew Lunn wrote:
> On Wed, May 09, 2018 at 08:50:58AM -0500, Dan Murphy wrote:
>> Andrew
>>
>> Thanks for the review
>>
>> On 05/09/2018 08:43 AM, Andrew Lunn wrote:
>>>> +static int dp83811_config_aneg(struct phy_device *phydev)
>>>> +{
>>>> + int err;
>>>> + int value;
>>>> +
>>>> + value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
>>>> + if (phydev->autoneg == AUTONEG_ENABLE) {
>>>> + err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
>>>> + (DP83811_SGMII_AUTO_NEG_EN | value));
>>>> + if (err < 0)
>>>> + return err;
>>>> + } else {
>>>> + err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
>>>> + (~DP83811_SGMII_AUTO_NEG_EN & value));
>>>> + if (err < 0)
>>>> + return err;
>>>> + }
>>>> +
>>>
>>> Hi Dan
>>>
>>> You say SGMII is unreliable on one of these devices. Should you check
>>> phydev->interface before enabling SGMII autoneg?
>>
>>
>> If SGMII enable bit(12) is not set in the device then setting auto neg has no affect on the device.
>
> Ah, O.K. Maybe add a comment about this.
>

I will add the check it will be clearer if written in code and explicit as opposed to explaining it.

Dan

>>>> +
>>>> +static int dp83811_config_init(struct phy_device *phydev)
>>>> +{
>>>> + int err;
>>>> + int value;
>>>> +
>>>> + err = genphy_config_init(phydev);
>>>> + if (err < 0)
>>>> + return err;
>>>> +
>>>> + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
>>>> + value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
>>>> + if (!(value & DP83811_SGMII_EN)) {
>>>> + err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
>>>> + (DP83811_SGMII_EN | value));
>>>> + if (err < 0)
>>>> + return err;
>>>> + } else {
>>>> + err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
>>>> + (~DP83811_SGMII_EN & value));
>>>> + if (err < 0)
>>>> + return err;
>>>> + }
>>>
>>> This looks to be a duplicate of dp83811_config_aneg()?
>>
>> It is almost the same but this function sets bit 12 and aneg function sets bit 13.
>> We can have SGMII with or without auto neg.
>
> Yep, i missed the difference.
>
> Andrew
>


--
------------------
Dan Murphy

\
 
 \ /
  Last update: 2018-05-09 16:00    [W:0.041 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site