lkml.org 
[lkml]   [2018]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/7] can: dev: increase bus-off message severity
Date
From: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>

bus-off is usually caused by hardware malfunction or configuration error
(baud rate mismatch) and causes a complete loss of communication.

Increase the "bus-off" message's severity from netdev_dbg() to
netdev_info() to make it visible to the user.

A can interface going into bus-off is similar in severity to ethernet's
"Link is Down" message, which is also printed at info level.

It is debatable whether the the "restarted" message should also be
changed to netdev_info() to make the interface state changes
comprehensible from the kernel log. I have chosen to keep the
"restarted" message at dbg for now as the "bus-off" message should be
enough for the user to notice and investigate the problem.

Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Cc: linux-can@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index b1779566c5bb..3c71f1cb205f 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -605,7 +605,7 @@ void can_bus_off(struct net_device *dev)
{
struct can_priv *priv = netdev_priv(dev);

- netdev_dbg(dev, "bus-off\n");
+ netdev_info(dev, "bus-off\n");

netif_carrier_off(dev);

--
2.17.0
\
 
 \ /
  Last update: 2018-05-08 11:29    [W:0.024 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site