lkml.org 
[lkml]   [2018]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/1] x86/xen: Reset VCPU0 info pointer after shared_info remap
From
Date
On 05/04/2018 04:11 PM, van der Linden, Frank wrote:
> This patch fixes crashes during boot for HVM guests on older (pre HVM
> vector callback) Xen versions. Without this, current kernels will always
> fail to boot on those Xen versions.
>
> Sample stack trace:
>
> BUG: unable to handle kernel paging request at ffffffffff200000
> IP: __xen_evtchn_do_upcall+0x1e/0x80
> PGD 1e0e067 P4D 1e0e067 PUD 1e10067 PMD 235c067 PTE 0
> Oops: 0002 [#1] SMP PTI
> Modules linked in:
> CPU: 0 PID: 512 Comm: kworker/u2:0 Not tainted 4.14.33-52.13.amzn1.x86_64 #1
> Hardware name: Xen HVM domU, BIOS 3.4.3.amazon 11/11/2016
> task: ffff88002531d700 task.stack: ffffc90000480000
> RIP: 0010:__xen_evtchn_do_upcall+0x1e/0x80
> RSP: 0000:ffff880025403ef0 EFLAGS: 00010046
> RAX: ffffffff813cc760 RBX: ffffffffff200000 RCX: ffffc90000483ef0
> RDX: ffff880020540a00 RSI: ffff880023c78000 RDI: 000000000000001c
> RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
> R13: ffff880025403f5c R14: 0000000000000000 R15: 0000000000000000
> FS: 0000000000000000(0000) GS:ffff880025400000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: ffffffffff200000 CR3: 0000000001e0a000 CR4: 00000000000006f0
> Call Trace:
> <IRQ>
> do_hvm_evtchn_intr+0xa/0x10
> __handle_irq_event_percpu+0x43/0x1a0
> handle_irq_event_percpu+0x20/0x50
> handle_irq_event+0x39/0x60
> handle_fasteoi_irq+0x80/0x140
> handle_irq+0xaf/0x120
> do_IRQ+0x41/0xd0
> common_interrupt+0x7d/0x7d
> </IRQ>
>
> During boot, the HYPERVISOR_shared_info page gets remapped to make it work
> with KASLR. This means that any pointer derived from it needs to be
> adjusted.
>
> The only value that this applies to is the vcpu_info pointer for VCPU 0.
> For PV and HVM with the callback vector feature, this gets done via the
> smp_ops prepare_boot_cpu callback. Older Xen versions do not support the
> HVM callback vector, so there is no Xen-specific smp_ops set up in that
> scenario. So, the vcpu_info pointer for VCPU 0 never gets set to the proper
> value, and the first reference of it will be bad. Fix this by resetting it
> immediately after the remap.
>
> Signed-off-by: Frank van der Linden <fllinden@amazon.com>
> Reviewed-by: Eduardo Valentin <eduval@amazon.com>
> Reviewed-by: Alakesh Haloi <alakeshh@amazon.com>
> Reviewed-by: Vallish Vaidyeshwara <vallish@amazon.com>
> Cc: Juergen Gross <jgross@suse.com>
> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> Cc: xen-devel@lists.xenproject.org
> ---
> arch/x86/xen/enlighten_hvm.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/x86/xen/enlighten_hvm.c b/arch/x86/xen/enlighten_hvm.c
> index 6b424da1ce75..c78b3e8fb2e5 100644
> --- a/arch/x86/xen/enlighten_hvm.c
> +++ b/arch/x86/xen/enlighten_hvm.c
> @@ -71,6 +71,19 @@ static void __init xen_hvm_init_mem_mapping(void)
> {
> early_memunmap(HYPERVISOR_shared_info, PAGE_SIZE);
> HYPERVISOR_shared_info = __va(PFN_PHYS(shared_info_pfn));
> +
> + /*
> + * The virtual address of the shared_info page has changed, so
> + * the vcpu_info pointer for VCPU 0 is now stale.

Is it "has changed" or "has changed if kaslr is on"?

> + *
> + * The prepare_boot_cpu callback will re-initialize it via
> + * xen_vcpu_setup, but we can't rely on that to be called for
> + * old Xen versions (xen_have_vector_callback == 0).
> + *
> + * It is, in any case, bad to have a stale vcpu_info pointer
> + * so reset it now.
> + */
> + xen_vcpu_info_reset(0);


Why not xen_vcpu_setup(0)?

-boris

\
 
 \ /
  Last update: 2018-05-07 17:13    [W:0.464 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site