lkml.org 
[lkml]   [2018]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/9] ALSA: hda/ca0132: Add PCI region2 iomap for SBZ
Date
This patch adds iomapping for the region2 section of memory on the SBZ.
This memory region is used in later patches for setting inputs and
outputs. If the mapping fails, the quirk is changed back to QUIRK_NONE
to avoid attempts to write to uninitialized memory.

It also adds a new exit sequence to unmap the iomem for the SBZ.

Signed-off-by: Connor McAdams <conmanx360@gmail.com>
---
sound/pci/hda/patch_ca0132.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 02238fe..78d2c26 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -29,6 +29,9 @@
#include <linux/firmware.h>
#include <linux/kernel.h>
#include <sound/core.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/pci.h>
#include "hda_codec.h"
#include "hda_local.h"
#include "hda_auto_parser.h"
@@ -760,6 +763,11 @@ struct ca0132_spec {
#ifdef ENABLE_TUNING_CONTROLS
long cur_ctl_vals[TUNING_CTLS_COUNT];
#endif
+ /*
+ * Sound Blaster Z PCI region 2 iomem, used for input and output
+ * switching, and other unknown commands.
+ */
+ void __iomem *mem_base;
};

/*
@@ -4696,6 +4704,8 @@ static void ca0132_free(struct hda_codec *codec)
snd_hda_sequence_write(codec, spec->base_exit_verbs);
ca0132_exit_chip(codec);
snd_hda_power_down(codec);
+ if (spec->mem_base)
+ iounmap(spec->mem_base);
kfree(spec->spec_init_verbs);
kfree(codec->spec);
}
@@ -4911,6 +4921,15 @@ static int patch_ca0132(struct hda_codec *codec)
else
spec->quirk = QUIRK_NONE;

+ /* Setup BAR Region 2 for Sound Blaster Z */
+ if (spec->quirk == QUIRK_SBZ) {
+ spec->mem_base = pci_iomap(codec->bus->pci, 2, 0xC20);
+ if (spec->mem_base == NULL) {
+ codec_warn(codec, "pci_iomap failed!");
+ codec_info(codec, "perhaps this is not an SBZ?");
+ spec->quirk = QUIRK_NONE;
+ }
+ }
spec->dsp_state = DSP_DOWNLOAD_INIT;
spec->num_mixers = 1;
spec->mixers[0] = ca0132_mixer;
--
2.7.4
\
 
 \ /
  Last update: 2018-05-05 21:06    [W:0.082 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site