lkml.org 
[lkml]   [2018]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 7/8] staging: mt7621-pci: remove some dead code.
Some code is dead because it is commented out.
Some is dead because it is uninteresting printks.
Some is dead because it declares unused functions.

Remove it all.

Signed-off-by: NeilBrown <neil@brown.name>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 14 --------------
1 file changed, 14 deletions(-)

diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index 5094e90eaf69..edd95013faf3 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -56,9 +56,6 @@

#include <ralink_regs.h>

-extern void pcie_phy_init(void);
-extern void chk_phy_pll(void);
-
/*
* These functions and structures provide the BIOS scan and mapping of the PCI
* devices.
@@ -364,11 +361,8 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
void
set_pcie_phy(u32 *addr, int start_b, int bits, int val)
{
-// printk("0x%p:", addr);
-// printk(" %x", *addr);
*(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
*(unsigned int *)(addr) |= val << start_b;
-// printk(" -> %x\n", *addr);
}

void
@@ -497,7 +491,6 @@ static int mt7621_pci_probe(struct platform_device *pdev)
val |= RALINK_PCIE2_RST;

ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
- printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);

*(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
*(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
@@ -513,12 +506,10 @@ static int mt7621_pci_probe(struct platform_device *pdev)
val |= RALINK_PCIE2_RST;

DEASSERT_SYSRST_PCIE(val);
- printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);

if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2
bypass_pipe_rst();
set_phy_for_ssc();
- printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);

read_config(0, 0, 0, 0x70c, &val);
printk("Port 0 N_FTS = %x\n", (unsigned int)val);
@@ -614,8 +605,6 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
break;
}
- printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
- //printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);

/*
ioport_resource.start = mt7621_res_pci_io1.start;
@@ -653,7 +642,6 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
case 7:
read_config(0, 2, 0, 0x4, &val);
write_config(0, 2, 0, 0x4, val|0x4);
- // write_config(0, 1, 0, 0x4, val|0x7);
read_config(0, 2, 0, 0x70c, &val);
val &= ~(0xff)<<8;
val |= 0x50<<8;
@@ -663,7 +651,6 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
case 6:
read_config(0, 1, 0, 0x4, &val);
write_config(0, 1, 0, 0x4, val|0x4);
- // write_config(0, 1, 0, 0x4, val|0x7);
read_config(0, 1, 0, 0x70c, &val);
val &= ~(0xff)<<8;
val |= 0x50<<8;
@@ -671,7 +658,6 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
default:
read_config(0, 0, 0, 0x4, &val);
write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
- // write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
read_config(0, 0, 0, 0x70c, &val);
val &= ~(0xff)<<8;
val |= 0x50<<8;

\
 
 \ /
  Last update: 2018-05-04 07:02    [W:0.061 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site