lkml.org 
[lkml]   [2018]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/9] R3Di and SBZ quirk entires + alt firmware loading
Sorry for sending these twice, I made a formatting mistake in the
first series, and they would not apply properly. Hopefully these do
not show up as spam because of this.

I went through and fixed them all individually and re-committed them,
but kept the same commit messages. I still have a lot to learn.

Thanks,
Connor

On Fri, May 4, 2018 at 12:19 AM, Connor McAdams <conmanx360@gmail.com> wrote:
> This patch adds PCI quirk ID's for the Sound Blaster Z and Recon3Di.
> Only the currently tested ID's have been added.
>
> This patch also adds the ability to load alternative firmwares for each
> card, the firmwares can be obtained from within the Windows driver.
> The Recon3Di uses "ctefx-r3di.bin" and the Sound Blaster Z uses
> "ctefx-sbz.bin". If the alternative firmware for the given quirk is not
> found, the original ctefx.bin will be used. This has been confirmed to
> work for both the R3Di and the SBZ.
>
> This patch also makes the character array *dirstr a const.
>
> Signed-off-by: Connor McAdams <conmanx360@gmail.com>
> ---
> sound/pci/hda/patch_ca0132.c | 61 +++++++++++++++++++++++++++++++++++++++-----
> 1 file changed, 55 insertions(+), 6 deletions(-)
>
> diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
> index 768ea86..8346100 100644
> --- a/sound/pci/hda/patch_ca0132.c
> +++ b/sound/pci/hda/patch_ca0132.c
> @@ -72,12 +72,16 @@
> #define SCP_GET 1
>
> #define EFX_FILE "ctefx.bin"
> +#define SBZ_EFX_FILE "ctefx-sbz.bin"
> +#define R3DI_EFX_FILE "ctefx-r3di.bin"
>
> #ifdef CONFIG_SND_HDA_CODEC_CA0132_DSP
> MODULE_FIRMWARE(EFX_FILE);
> +MODULE_FIRMWARE(SBZ_EFX_FILE);
> +MODULE_FIRMWARE(R3DI_EFX_FILE);
> #endif
>
> -static char *dirstr[2] = { "Playback", "Capture" };
> +static const char *dirstr[2] = { "Playback", "Capture" };
>
> enum {
> SPEAKER_OUT,
> @@ -734,6 +738,7 @@ struct ca0132_spec {
> unsigned int scp_resp_header;
> unsigned int scp_resp_data[4];
> unsigned int scp_resp_count;
> + bool alt_firmware_present;
>
> /* mixer and effects related */
> unsigned char dmic_ctl;
> @@ -762,6 +767,8 @@ struct ca0132_spec {
> enum {
> QUIRK_NONE,
> QUIRK_ALIENWARE,
> + QUIRK_SBZ,
> + QUIRK_R3DI,
> };
>
> static const struct hda_pintbl alienware_pincfgs[] = {
> @@ -782,6 +789,10 @@ static const struct snd_pci_quirk ca0132_quirks[] = {
> SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE),
> SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE),
> SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE),
> + SND_PCI_QUIRK(0x1102, 0x0010, "Sound Blaster Z", QUIRK_SBZ),
> + SND_PCI_QUIRK(0x1102, 0x0023, "Sound Blaster Z", QUIRK_SBZ),
> + SND_PCI_QUIRK(0x1458, 0xA016, "Recon3Di", QUIRK_R3DI),
> + SND_PCI_QUIRK(0x1458, 0xA036, "Recon3Di", QUIRK_R3DI),
> {}
> };
>
> @@ -3207,7 +3218,7 @@ static int ca0132_select_out(struct hda_codec *codec)
> pin_ctl & ~PIN_HP);
> /* enable speaker node */
> pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0,
> - AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
> + AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
> snd_hda_set_pin_ctl(codec, spec->out_pins[0],
> pin_ctl | PIN_OUT);
> } else {
> @@ -4370,11 +4381,49 @@ static void ca0132_set_dsp_msr(struct hda_codec *codec, bool is96k)
> static bool ca0132_download_dsp_images(struct hda_codec *codec)
> {
> bool dsp_loaded = false;
> + struct ca0132_spec *spec = codec->spec;
> const struct dsp_image_seg *dsp_os_image;
> const struct firmware *fw_entry;
> -
> - if (request_firmware(&fw_entry, EFX_FILE, codec->card->dev) != 0)
> - return false;
> + /*
> + * Alternate firmwares for different variants. The Recon3Di apparently
> + * can use the default firmware, but I'll leave the option in case
> + * it needs it again.
> + */
> + switch (spec->quirk) {
> + case QUIRK_SBZ:
> + if (request_firmware(&fw_entry, SBZ_EFX_FILE,
> + codec->card->dev) != 0) {
> + codec_dbg(codec, "SBZ alt firmware not detected. ");
> + spec->alt_firmware_present = false;
> + } else {
> + codec_dbg(codec, "Sound Blaster Z firmware selected.");
> + spec->alt_firmware_present = true;
> + }
> + break;
> + case QUIRK_R3DI:
> + if (request_firmware(&fw_entry, R3DI_EFX_FILE,
> + codec->card->dev) != 0) {
> + codec_dbg(codec, "Recon3Di alt firmware not detected.");
> + spec->alt_firmware_present = false;
> + } else {
> + codec_dbg(codec, "Recon3Di firmware selected.");
> + spec->alt_firmware_present = true;
> + }
> + break;
> + default:
> + spec->alt_firmware_present = false;
> + break;
> + }
> + /*
> + * Use default ctefx.bin if no alt firmware is detected, or if none
> + * exists for your particular codec.
> + */
> + if (!spec->alt_firmware_present) {
> + codec_dbg(codec, "Default firmware selected.");
> + if (request_firmware(&fw_entry, EFX_FILE,
> + codec->card->dev) != 0)
> + return false;
> + }
>
> dsp_os_image = (struct dsp_image_seg *)(fw_entry->data);
> if (dspload_image(codec, dsp_os_image, 0, 0, true, 0)) {
> @@ -4476,7 +4525,7 @@ static struct hda_verb ca0132_base_exit_verbs[] = {
> {}
> };
>
> -/* Other verbs tables. Sends after DSP download. */
> +/* Other verbs tables. Sends after DSP download. */
> static struct hda_verb ca0132_init_verbs0[] = {
> /* chip init verbs */
> {0x15, 0x70D, 0xF0},
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2018-05-04 06:30    [W:0.581 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site