lkml.org 
[lkml]   [2018]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 6/6] arm64: dts: socionext: Add missing cooling device properties for CPUs
2018-05-25 14:40 GMT+09:00 Viresh Kumar <viresh.kumar@linaro.org>:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>


Applied to linux-uniphier.

I had already sent a PR for v4.18-rc1 before I received this patch.
Please wait for v4.19-rc1.

Thanks.

> ---
> arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
> index 3a5ed789c056..10ffb5019013 100644
> --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
> +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
> @@ -58,6 +58,7 @@
> clocks = <&sys_clk 32>;
> enable-method = "psci";
> operating-points-v2 = <&cluster0_opp>;
> + #cooling-cells = <2>;
> };
>
> cpu2: cpu@100 {
> @@ -77,6 +78,7 @@
> clocks = <&sys_clk 33>;
> enable-method = "psci";
> operating-points-v2 = <&cluster1_opp>;
> + #cooling-cells = <2>;
> };
> };
>
> --
> 2.15.0.194.g9af6a3dea062
>



--
Best Regards
Masahiro Yamada

\
 
 \ /
  Last update: 2018-06-01 05:27    [W:0.579 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site