lkml.org 
[lkml]   [2018]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] clk: vc5: Fix div-by-0 when rounding a rate of zero
From
Date


On 05/31/2018 11:35 AM, Marek Vasut wrote:
> On 05/31/2018 08:32 PM, Steve Longerbeam wrote:
>> Hi Marek,
>>
>>
>> On 05/31/2018 11:25 AM, Marek Vasut wrote:
>>> On 05/31/2018 08:23 PM, Steve Longerbeam wrote:
>>>> Just return zero for a rounded rate if requested rate is zero.
>>>>
>>>> This was caught by CONFIG_UBSAN:
>>>>
>>>> [  192.266748] UBSAN: Undefined behaviour in
>>>> drivers/clk/clk-versaclock5.c:513:17
>>>> [  192.274050] division by zero
>>>> [  192.276976] CPU: 0 PID: 2579 Comm: vsp-unit-test-0 Tainted: G
>>>> B   WC      4.14.17-02752-g13fb96f #1
>>>> [  192.286378] Hardware name: Renesas Salvator-X board based on
>>>> r8a7795 ES2.0+ (DT)
>>>> [  192.293852] Call trace:
>>>> [  192.296343] [<ffff2000080900dc>] dump_backtrace+0x0/0x390
>>>> [  192.301807] [<ffff200008090480>] show_stack+0x14/0x1c
>>>> [  192.306920] [<ffff200008f66574>] dump_stack+0x134/0x1a8
>>>> [  192.312213] [<ffff2000087aaa30>] ubsan_epilogue+0x14/0x60
>>>> [  192.317677] [<ffff2000087ab4d0>]
>>>> __ubsan_handle_divrem_overflow+0x11c/0x170
>>>> [  192.324720] [<ffff200008852120>] vc5_fod_round_rate+0x68/0x148
>>>> [  192.330620] [<ffff20000884567c>] clk_calc_new_rates+0x238/0x3fc
>>>> [  192.336607] [<ffff2000088456e0>] clk_calc_new_rates+0x29c/0x3fc
>>>> [  192.342595] [<ffff2000088483ac>] clk_core_set_rate_nolock+0x48/0x11c
>>>> [  192.349019] [<ffff2000088484b4>] clk_set_rate+0x34/0x4c
>>>> [  192.354307] [<ffff20000895e304>] rcar_du_pm_suspend+0x274/0x2f4
>>>> [  192.360297] [<ffff20000898feac>] platform_pm_suspend+0x78/0xb8
>>>> [  192.366198] [<ffff2000089a5604>] dpm_run_callback+0x584/0xa18
>>>> [  192.372010] [<ffff2000089a69e0>] __device_suspend+0x1a8/0x534
>>>> [  192.377822] [<ffff2000089adc48>] dpm_suspend+0x130/0xea0
>>>> [  192.383197] [<ffff2000089b0344>] dpm_suspend_start+0x130/0x138
>>>> [  192.389099] [<ffff20000817f584>]
>>>> suspend_devices_and_enter+0xf0/0x1778
>>>> [  192.395700] [<ffff200008183014>] pm_suspend+0x2408/0x245c
>>>> [  192.401162] [<ffff20000817c0a4>] state_store+0xf0/0x130
>>>> [  192.406451] [<ffff200008f6f19c>] kobj_attr_store+0x5c/0x6c
>>>> [  192.412002] [<ffff2000084f4c94>] sysfs_kf_write+0xe8/0xfc
>>>> [  192.417466] [<ffff2000084f30b0>] kernfs_fop_write+0x22c/0x2e4
>>>> [  192.423281] [<ffff2000083e46d4>] __vfs_write+0x104/0x34c
>>>> [  192.428656] [<ffff2000083e4cc4>] vfs_write+0x134/0x2d8
>>>> [  192.433857] [<ffff2000083e5150>] SyS_write+0xbc/0x12c
>>>> [  192.438967] Exception stack(0xffff8006cd1cfec0 to 0xffff8006cd1d0000)
>>>> [  192.445480] fec0: 0000000000000001 000000001e303f00
>>>> 0000000000000004 0000ffff959a5000
>>>> [  192.453397] fee0: 0000000000000000 0000000155510004
>>>> 0000000000000003 000000000000006d
>>>> [  192.461314] ff00: 0000000000000040 0000000000000000
>>>> 0000ffffcc304800 0000000000000020
>>>> [  192.469230] ff20: 0000000000000000 0000000000000000
>>>> 0000000000000001 0000000000000008
>>>> [  192.477148] ff40: 00000000004eb3b8 0000ffff958bb840
>>>> 000000000000003d 0000000000000001
>>>> [  192.485065] ff60: 000000001e303f00 0000ffff959a1508
>>>> 0000000000000004 000000001e303f00
>>>> [  192.492982] ff80: 0000000000000004 00000000004d4c68
>>>> 0000000000000001 0000000000000000
>>>> [  192.500899] ffa0: 000000001e30d5c0 0000ffffcc304820
>>>> 0000ffff958bec64 0000ffffcc304820
>>>> [  192.508816] ffc0: 0000ffff95912898 0000000020000000
>>>> 0000000000000001 0000000000000040
>>>> [  192.516733] ffe0: 0000000000000000 0000000000000000
>>>> 0000000000000000 0000000000000000
>>>> [  192.524650] [<ffff200008083ef0>] el0_svc_naked+0x24/0x28
>>>>
>>>> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
>>>> ---
>>>>   drivers/clk/clk-versaclock5.c | 4 ++++
>>>>   1 file changed, 4 insertions(+)
>>>>
>>>> diff --git a/drivers/clk/clk-versaclock5.c
>>>> b/drivers/clk/clk-versaclock5.c
>>>> index decffb3..113523d 100644
>>>> --- a/drivers/clk/clk-versaclock5.c
>>>> +++ b/drivers/clk/clk-versaclock5.c
>>>> @@ -509,6 +509,10 @@ static long vc5_fod_round_rate(struct clk_hw
>>>> *hw, unsigned long rate,
>>>>       u32 div_int;
>>>>       u64 div_frc;
>>>>   +    /* prevent div-by-0 */
>>>> +    if (rate == 0)
>>>> +        return 0;
>>>> +
>>>>       /* Determine integer part, which is 12 bit wide */
>>>>       div_int = f_in / rate;
>>>>       /*
>>>>
>>> Can this actually happen ?
>> We caught this using the Renesas 3.6.0 BSP release, when performing
>> a suspend of rcar-du driver. The rcar_du_pm_suspend() in 3.6.0 BSP is
>> modified
>> from mainline version, including calling clk_set_rate() on the crtc
>> clocks with a
>> rate of zero. So this is not actually reproducible (yet) in mainline.
> So it sets clock to 0 ?

Yep, see

https://kernel.googlesource.com/pub/scm/linux/kernel/git/horms/renesas-bsp/+/rcar-3.6.0/drivers/gpu/drm/rcar-du/rcar_du_drv.c#359

> Anyway, this looks sane, although maybe the
> whole driver could use a once-over to see if there could be more of this.

Actually I do see more potential divide-by-zeros due to a passed rate
of zero, including vc5_pfd_round_rate() and vc5_pfd_set_rate().

I can resubmit this patch fixing all cases in clk-versaclock5.c if you
like (and probably remove the misleading backtrace in the commit
message since it is a Renesas 3.6.0 kernel backtrace not a mainline
backtrace).

Or perhaps just treat this as a heads-up, I'll leave it up to you.

>
> Or should the clock framework even let us set clock to 0 Hz ?

That is a good question, it might make sense for the core clock framework
to not allow passing a rate of 0 on to the clock ops, and instead treat
it generically.

Steve

\
 
 \ /
  Last update: 2018-05-31 20:52    [W:0.043 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site