lkml.org 
[lkml]   [2018]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/9] scsi: hisi_sas: Add a flag to filter PHY events during reset
Date
From: Xiaofei Tan <tanxiaofei@huawei.com>

During reset, we don't want PHY events reported to libsas for PHYs which
were previously attached prior to reset.

So check hisi_hba->flags for HISI_SAS_RESET_BIT to filter PHY events
during reset.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 3 ++-
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 3 ++-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 3 ++-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 ++-
4 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 090d3e0..006e776 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1927,7 +1927,8 @@ void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
} else {
struct hisi_sas_port *port = phy->port;

- if (phy->in_reset) {
+ if (test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags) ||
+ phy->in_reset) {
dev_info(dev, "ignore flutter phy%d down\n", phy_no);
return;
}
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 89ab18c..3277442 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1469,7 +1469,8 @@ static irqreturn_t int_bcast_v1_hw(int irq, void *p)
goto end;
}

- sha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ if (!test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags))
+ sha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);

end:
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 213c530..159576e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -2840,7 +2840,8 @@ static void phy_bcast_v2_hw(int phy_no, struct hisi_hba *hisi_hba)

hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 1);
bcast_status = hisi_sas_phy_read32(hisi_hba, phy_no, RX_PRIMS_STATUS);
- if (bcast_status & RX_BCAST_CHG_MSK)
+ if ((bcast_status & RX_BCAST_CHG_MSK) &&
+ !test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags))
sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
CHL_INT0_SL_RX_BCST_ACK_MSK);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index c40fdb8..e43881d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1263,7 +1263,8 @@ static irqreturn_t phy_bcast_v3_hw(int phy_no, struct hisi_hba *hisi_hba)

hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 1);
bcast_status = hisi_sas_phy_read32(hisi_hba, phy_no, RX_PRIMS_STATUS);
- if (bcast_status & RX_BCAST_CHG_MSK)
+ if ((bcast_status & RX_BCAST_CHG_MSK) &&
+ !test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags))
sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
CHL_INT0_SL_RX_BCST_ACK_MSK);
--
1.9.1
\
 
 \ /
  Last update: 2018-05-31 14:53    [W:0.916 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site