lkml.org 
[lkml]   [2018]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] libata: Drop SanDisk SD7UB3Q*G1001 NOLPM quirk
From
Date
HI,

On 31-05-18 13:16, Hans de Goede wrote:
> Commit 184add2ca23c ("libata: Apply NOLPM quirk for SanDisk
> SD7UB3Q*G1001 SSDs") disabled LPM for SanDisk SD7UB3Q*G1001 SSDs.
>
> This has lead to several reports of users of that SSD where LPM
> was working fine and who know have a significantly increased idle
> power consumption on their laptops.
>
> Likely there is another problem on the T450s from the original
> reporter which gets exposed by the uncore reaching deeper sleep
> states (higher PC-states) due to LPM being enabled. The problem as
> reported, a hardfreeze about once a day, already did not sound like
> it would be caused by LPM and the reports of the SSD working fine
> confirm this. The original reporter is ok with dropping the quirk.
>
> A X250 user has reported the same hard freeze problem and for him
> the problem went away after unrelated updates, I suspect some GPU
> driver stack changes fixed things.
>
> TL;DR: The original reporters problem were triggered by LPM but not
> an LPM issue, so drop the quirk for the SSD in question.
>
> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1583207
> Cc: stable@vger.kernel.org
> Cc: Richard W.M. Jones <rjones@redhat.com>
> Cc: Lorenzo Dalrio <lorenzo.dalrio@gmail.com>
> Reported-by: Lorenzo Dalrio <lorenzo.dalrio@gmail.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

I should have rebased on top of 4.17-rc7 before doing this, I
will send a v2 which should apply cleanly.

Regards,

Hans




> ---
> drivers/ata/libata-core.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index 68596bd4cf06..6e400ff2b5db 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -4552,9 +4552,6 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
> /* This specific Samsung model/firmware-rev does not handle LPM well */
> { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },
>
> - /* Sandisk devices which are known to not handle LPM well */
> - { "SanDisk SD7UB3Q*G1001", NULL, ATA_HORKAGE_NOLPM, },
> -
> /* devices that don't properly handle queued TRIM commands */
> { "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
> ATA_HORKAGE_ZERO_AFTER_TRIM, },
>

\
 
 \ /
  Last update: 2018-05-31 13:21    [W:0.040 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site