lkml.org 
[lkml]   [2018]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/5] Documentation: DT: add i.MX EPIT timer binding
Date
From: Clément Peron <clement.peron@devialet.com>

Add devicetree binding document for NXP's i.MX SoC specific
EPIT timer driver.

Signed-off-by: Clément Peron <clement.peron@devialet.com>
---
.../devicetree/bindings/timer/fsl,imxepit.txt | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxepit.txt

diff --git a/Documentation/devicetree/bindings/timer/fsl,imxepit.txt b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
new file mode 100644
index 000000000000..90112d58af10
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
@@ -0,0 +1,24 @@
+Binding for the i.MX EPIT timer
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "fsl,imx31-epit"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: Should contain EPIT controller interrupt
+- clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names
+- clock-names : should include entries "ipg", "per"
+
+Example for i.MX6QDL:
+ epit1: epit@20d0000 {
+ compatible = "fsl,imx6q-epit", "fsl,imx31-epit";
+ reg = <0x020d0000 0x4000>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_IPG_PER>,
+ <&clks IMX6QDL_CLK_EPIT1>;
+ clock-names = "ipg", "per";
+ };
--
2.17.0
\
 
 \ /
  Last update: 2018-05-30 14:05    [W:0.078 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site