lkml.org 
[lkml]   [2018]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/6] clk: tegra20: init NDFLASH clock to sensible rate
On Tue, May 29, 2018 at 03:19:47PM +0300, Dmitry Osipenko wrote:
> On 29.05.2018 15:12, Stefan Agner wrote:
> > On 29.05.2018 09:48, Peter De Schrijver wrote:
> >> On Mon, May 28, 2018 at 05:53:08PM +0200, Stefan Agner wrote:
> >>> On 28.05.2018 09:55, Peter De Schrijver wrote:
> >>>> On Sun, May 27, 2018 at 11:54:40PM +0200, Stefan Agner wrote:
> >>>>> From: Lucas Stach <dev@lynxeye.de>
> >>>>>
> >>>>> Set up the NAND Flash controller clock to run at 150MHz
> >>>>> instead of the rate set by the bootloader. This is a
> >>>>> conservative rate which also yields good performance.
> >>>>>
> >>>>> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> >>>>> Signed-off-by: Stefan Agner <stefan@agner.ch>
> >>>>> ---
> >>>>> drivers/clk/tegra/clk-tegra20.c | 1 +
> >>>>> 1 file changed, 1 insertion(+)
> >>>>>
> >>>>> diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
> >>>>> index 0ee56dd04cec..dff8c425cd28 100644
> >>>>> --- a/drivers/clk/tegra/clk-tegra20.c
> >>>>> +++ b/drivers/clk/tegra/clk-tegra20.c
> >>>>> @@ -1049,6 +1049,7 @@ static struct tegra_clk_init_table init_table[] __initdata = {
> >>>>> { TEGRA20_CLK_GR2D, TEGRA20_CLK_PLL_C, 300000000, 0 },
> >>>>> { TEGRA20_CLK_GR3D, TEGRA20_CLK_PLL_C, 300000000, 0 },
> >>>>> { TEGRA20_CLK_VDE, TEGRA20_CLK_CLK_MAX, 300000000, 0 },
> >>>>> + { TEGRA20_CLK_NDFLASH, TEGRA20_CLK_PLL_P, 150000000, 0 },
> >>>>> /* must be the last entry */
> >>>>> { TEGRA20_CLK_CLK_MAX, TEGRA20_CLK_CLK_MAX, 0, 0 },
> >>>>> };
> >>>>> --
> >>>>> 2.17.0
> >>>>>
> >>>>
> >>>> Maybe better to specify this in the Tegra20 dtsi? See
> >>>> "Assigned clock parents and rates" in
> >>>> Documentation/devicetree/bindings/clock/clock-bindings.txt
> >>>
> >>> assigned-clocks indeed works just fine for this case. Thanks for
> >>> bringing this up, will drop this patch and add the device tree
> >>> properties in v3.
> >>>
> >>> Hm, interesting that none of the Tegra device tree make use of the
> >>> feature so far. I guess there would be other cases where this would be
> >>> useful as well (the one just above, VDE?).
> >>>
> >>
> >> Yes, historically this feature wasn't available, so we used these init tables.
> >> Unfortunately it's not easy to get rid of them for parent and rate
> >> configuration, because new kernels should also work with existing DTBs, so we
> >> can't just add assigned-clock properties and remove the existing table
> >> entries. What we could do is use the CLK_IS_CRITICAL flag for all clocks which
> >> are only enabled by the init table. For not yet merged blocks, this is
> >> ofcourse not a concern.
> >
> > Sure I understand.
> >
> > Was just somewhat surprised that it isn't used at all yet (grep -r -e
> > assigned-clock arch/arm/boot/dts/tegra* returns nothing). After all,
> > assigned clocks bindings have been merged in 2014 :-)
> >
> > At least "clk: tegra: Specify VDE clock rate" merged earlier this year
> > would have been a candidate already.
>
> I wasn't even aware of existence of the assigned-clock properties, probably just
> like others.

This feature seems to be little used indeed. Not sure why.

Peter.

\
 
 \ /
  Last update: 2018-05-30 09:43    [W:0.132 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site