lkml.org 
[lkml]   [2018]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] nvmet: switch loopback target state to connecting when resetting
On Thu, May 03, 2018 at 05:00:35PM +0200, Johannes Thumshirn wrote:
> After commit bb06ec31452f ("nvme: expand nvmf_check_if_ready checks")
> resetting of the loopback nvme target failed as we forgot to switch
> it's state to NVME_CTRL_CONNECTING before we reconnect the admin
> queues. Therefore the checks in nvmf_check_if_ready() choose to go to
> the reject_io case and thus we couldn't sent out an identify
> controller command to reconnect.
>
> Change the controller state to NVME_CTRL_CONNECTING after tearing down
> the old connection and before re-establishing the connection.
>
> Fixes: bb06ec31452f ("nvme: expand nvmf_check_if_ready checks")
> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
> ---
> drivers/nvme/target/loop.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
> index 31fdfba556a8..27a8561c0cb9 100644
> --- a/drivers/nvme/target/loop.c
> +++ b/drivers/nvme/target/loop.c
> @@ -469,6 +469,12 @@ static void nvme_loop_reset_ctrl_work(struct work_struct *work)
> nvme_stop_ctrl(&ctrl->ctrl);
> nvme_loop_shutdown_ctrl(ctrl);
>
> + if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING)) {
> + /* state change failure should never happen */
> + WARN_ON_ONCE(1);
> + return;
> + }
> +
> ret = nvme_loop_configure_admin_queue(ctrl);
> if (ret)
> goto out_disable;
> --
> 2.16.3

Thanks, applied to the 4.17 nvme branch.

\
 
 \ /
  Last update: 2018-05-03 17:30    [W:0.131 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site