lkml.org 
[lkml]   [2018]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v7 6/6] gnss: add w2sg0004 to Kconfig
    Date
    Allow to configure for w2sg0004 driver.

    Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
    ---
    drivers/gnss/Kconfig | 10 ++++++++++
    1 file changed, 10 insertions(+)

    diff --git a/drivers/gnss/Kconfig b/drivers/gnss/Kconfig
    index 6abc88514512..ccc128bd0a3f 100644
    --- a/drivers/gnss/Kconfig
    +++ b/drivers/gnss/Kconfig
    @@ -40,4 +40,14 @@ config GNSS_UBX_SERIAL

    If unsure, say N.

    +config GNSS_W2SG0004
    + tristate "W2SG00x4 power on/off driver"
    + depends on GPIOLIB && SERIAL_DEV_BUS
    + help
    + Enable on/off control of W2SG00x4 GPS module connected
    + to some SoC UART to allow powering up/down if the /dev/gnss
    + is opened/closed.
    +
    + It also provides a "rfkill gps" name to control the LNA power.
    +
    endif # GNSS
    --
    2.12.2
    \
     
     \ /
      Last update: 2018-05-03 11:37    [W:2.920 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site